CYP CPHD-V4L Manual de usuario
Operation Manual
Operation Manual
4K UHD+HDMI Signal Generator & Analyzer
(Portable Version)
CPHD-V4L (Dark Case)
®
registered trademarks of HDMI licensing Administrator, Inc.
DISCLAIMERS
The information in this manual has been carefully checked and is believed
to be accurate. Cypress Technology assumes no responsibility for any
infringements of patents or other rights of third parties which may result from
its use.
Cypress Technology assumes no responsibility for any inaccuracies that
may be contained in this document. Cypress also makes no commitment to
update or to keep current the information contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express written
permission and consent from Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain, moisture
or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings
or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it
is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to
be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings
in the unit housing that provide ventilation and allow for sucient space
for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use to
avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2019/08/02 Preliminary release (R2 hardware)
RDV2 2020/05/20 Updated to new layout and added
details covering the R3 hardware’s
AOC cable support
CONTENTS
1. Introduction..........................................................1
2. Applications .........................................................1
3. Package Contents ...............................................1
4. System Requirements.........................................2
5. Features................................................................2
6. Operation Controls and Functions ....................3
6.1 Front Panel......................................................3
6.2 Top Panel.........................................................5
6.3 Battery Compartment ......................................6
6.4 Serial via USB Defaults ...................................7
6.5 OLED Display..................................................8
6.5.1 Power Saving Mode ...............................8
6.5.2 Special OLED Icons ...............................8
6.6 OLED Menu.....................................................9
6.6.1 Analyzer Mode........................................9
6.6.2 Pattern Mode........................................21
6.6.3 Cable Test Mode ..................................34
6.7 Test Timings & Patterns.................................37
6.7.1 Resolution Support (Analyzer Mode) ...37
6.7.2 Resolution Support (Pattern Mode)......37
6.7.3 Test Patterns (Pattern Mode) ...............38
6.7.4 Audio Output Support (Pattern Mode)..41
6.8 Serial Commands..........................................42
7. Connection Diagram .........................................60
8. Specications ....................................................61
8.1 Technical Specications ................................61
8.2 Video Specications ......................................62
8.3 Audio Specications ......................................64
8.3.1 Digital Audio .........................................64
8.4 Cable Specications......................................65
8.5 Operational Notes..........................................66
9. Acronyms ...........................................................67
1
1. INTRODUCTION
This portable HDMI Signal Generator & Analyzer provides a convenient way
to test and verify all aspects of an HDMI signal path, including source and
sink. This unit complies with the HDMI 2.0a and HDCP 1.4/2.2 standards.
The unit’s Analyzer mode complies with the CEA standard HDR static
metadata extensions CEA-861-F and CEA-861.3 for EDID analysis.
The unit is powered by a single rechargeable Lithium-ion battery (not
included). Beyond the Lithium-ion battery, the unit may also be powered (and
the battery recharged) via the micro USB port. An external power bank can
also be used to extend the portable service time. 4K sources can be scaled
down to 1080p output in Analyzer mode to support a wider range of displays
when analyzing high bandwidth sources.
The unit has an integrated OLED display which provides a way to quickly
and clearly view the current signal state or the results of signal analysis. This
portable handheld design is ideal for both the professional end user and
installation engineer alike.
2. APPLICATIONS
• Installer/Integrator multi-function test tool
• HDMI source and sink testing
• UHD system/SCDC error identication
• Third-party equipment setup
• Source and sink EDID reading, writing and saving
• HDCP compliance verication
• Production testing
• R&D design and testing
3. PACKAGE CONTENTS
• 1× HDMI Signal Generator & Analyzer (Portable Version)
• 1× USB Mirco-B to USB Type-A Cable
• 1× Operation Manual
2
4. SYSTEM REQUIREMENTS
• HDMI receiving equipment such as an HDTV, monitor or audio amplier
and/or HDMI source equipment such as a media player, video game
console or set-top box.
• For portable operation, a battery (not included) is required. The Panasonic
NCR18650B (3.6V/3350mAh) Lithium-ion rechargeable battery, or similar,
is recommended.
5. FEATURES
• HDMI input and output with 18Gbps 4K UHD+support
• DVI 1.0 compliant with the use of an HDMI-DVI adaptor
• HDCP 1.4 and 2.2 compliant
• Supports UHD+ resolutions up to 4096×2160@60Hz (4:4:4, 8-bit)
• Analyzer mode supports source video, audio, timing and packet analysis
while bypassing the signal to a connected display
• 4K sources can be scaled to 1080p in Analyzer mode to support a wider
range of displays when analyzing a high-bandwidth source
• HDR bypass, analysis and generation support complying with the CEA
standard HDR static metadata extensions CEA-861-F and CEA-861.3
• HDCP and SCDC monitoring functions
• 23 selectable output resolutions available in Test Pattern mode
• 17 selectable static test patterns in Test Pattern mode
• HDMI 2.0 cable test function including tests for 5V, CEC and hot-plug
detection support
• Supports AOC (Active Optical Cable) ber optic HDMI cables (Hardware
revision R3 or later only)
• Supports generation of up to 8 channels of LPCM audio with adjustable
sinewave frequencies for each channel
• Comprehensive EDID management, analysis and emulation support with
10 built-in default EDIDs and 10 user-denable EDIDs
• Powered by a single Lithium-ion battery (not included) or an external USB
power supply/power bank
• OLED display with rapid updates of current status information
• Supports optional Windows control software
• Portable palm-sized design with easy to use front-panel controls
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
MENU
-
+
ENTER
TASK
MODE
HDCP
FACTORY
RESET
UHD+ PATTERN GENERATOR & ANALYZER
2.2
1
4
7
2
3
5
6
1OLED: This screen’s layout changes depending on the unit’s operational
mode and selected function. The status lines at the top shows the unit’s
current operational mode (Analyzer, Pattern, or Cable Test), USB port
mode (power or control), power status, and mode specic detection
details. Information below the status lines consists of either the unit’s
menu or signal analysis data.
Analyzer Mode: The status line will display the 5V, TMDS clock, and
sync detection state of the connected source. (1 = detected, 0 = not
detected.)
4
Pattern Mode: The status line will display the RxSense and Hot-plug
detection state of the connected display. (1 = detected, 0 = not detected.)
Cable Test Mode: The status line will display a cable connection graphic.
2BATTERY CHARGING LED: The battery charging LED will illuminate
red when a USB power source is connected and actively charging the
battery.
3MENU Button: Press to back out from menu items and return to the
main OLED menu screen.
4 +/▲ & −/▼ Button: Press to move up and down or adjust selections
within menus.
5ENTER Button: Press to conrm a selection or to go deeper into a menu
item.
Note: In Analyzer and Pattern modes, press and hold this button for 2
seconds to turn audio on or o.
6TASK MODE Button: Press to switch the unit between Analyzer Mode,
Pattern Mode, and Cable Test Mode.
Note: In Analyzer mode, press and hold this button for 2 seconds to
toggle the input’s hot plug trigger. In Pattern mode, press and hold this
button for 2 seconds to enable or disable the output’s AV Mute function.
5
7HDCP Button: Press to switch between supported HDCP versions (1.4,
2.2) or to disable HDCP. In Analyzer mode, this changes the HDCP
versions supported by the input port. In Pattern mode, this changes
the HDCP required by the output port. The button’s outline will light up
according to the HDCP state and current version supported.
HDCP Button Outline Status
Solid Red HDCP 1.4
Solid Blue HDCP 2.2
O HDCP Disabled
Flashing Authentication Failure
Factory Reset: Pressing and holding the HDCP button during power on
will reset the unit to its factory default settings.
6.2 Top Panel
HDMI
OUT
USB IN
1 2 3 4
1POWER Switch: Flip this switch to turn the unit ON or OFF.
2USB Port: Multi-function port for power/battery charging, rmware
update or serial command control.
Note: The USB operation mode is changed within the OLED menu’s
Setup menu.
3HDMI OUT Port: Connect to an HDMI TV, monitor or amplier for digital
video and audio output.
4HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console or set-top box.
Otros manuales para CPHD-V4L
1
Tabla de contenidos
Otros manuales de Instrumento de medición de CYP
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario