CYP DS-VWC2-4K22 Manual de usuario
DS-VWC2-4K22
4K Dual Input HDMI Video Wall Processor
with Warping and Rotation
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2021 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2020/09/04 Preliminary release
RDV2 2020/12/14 Add Phase 2 features: Chroma key, Cropping
RDV3 2020/12/28 Added Default and Preset Update to software
CONTENTS
1. Introduction............................................................. 1
2. Applications ............................................................. 1
3. Package Contents .................................................... 1
4. System Requirements ............................................. 2
5. Features.................................................................... 2
6. Operation Controls And Functions......................... 3
6.1 Front Panel...........................................................................3
6.2 Rear Panel............................................................................. 4
6.3 RS-232 Pinout and Defaults........................................... 4
6.4 OSD Menu ............................................................................5
6.5 Video Wall Control Software........................................26
6.5.1 Software Operation .............................................26
6.5.2 Video Wall Unit Search........................................27
6.5.3 Basic Unit Settings & Conguration...............29
6.5.4 I/O Conguration..................................................30
6.5.5 Warping Mode Image Conguration ............32
6.5.6 Scaling Mode Image Conguration...............33
6.5.7 Scaling Mode Layouts.........................................34
6.5.7.1 Window Tab..................................................34
6.5.7.2 Cropping Tab ...............................................38
6.5.8 Warping Mode Layouts ......................................40
6.5.8.1 Pre-Dened Video Wall Layouts............41
6.5.8.2 Customised Video Wall Layouts ............42
6.5.8.3 Multi-Zone Video Wall Layouts..............45
6.5.9 Conguration Export/Import...........................47
6.6 Telnet Control....................................................................49
6.7 Serial and Telnet Commands.......................................49
7. Connection Diagram ............................................. 86
8. Specications......................................................... 87
8.1 Technical Specications ................................................87
8.2 Video Specications........................................................88
8.3 Audio Specications.......................................................90
8.3.1 Digital Audio ..........................................................90
8.4 Cable Specications .......................................................90
9. Acronyms................................................................ 91
1
1. INTRODUCTION
This UHD+2×1 HDMI Video Wall Rotation processor is capable of scaling
and rotating the selected input source to nearly any angle and size
desired. It’s the ideal solution for presenting sources across the unique
video display arrangements often found in commercial displays, control
rooms, or classrooms. HDMI input and output resolutions up to 4K@60Hz
with 2 channel LPCM audio is supported. In Warping mode the output
is locked to 4K, but video latency is only 1 to 2 frames and the unit is
capable of scaling and rotating the source, with an accuracy of 1°, as
required. In Scaling mode, the unit can scale to a wide selection of output
resolutions, up to 4K@60Hz, with independent PiP windows, outlines and
video mirror eects.
By combining multiple units with an HDMI splitter or matrix it is possible
to create fantastically varied arrangements of rotated displays for large
video wall applications. This is perfect for creating distinct and eye-
catching advertising or promotional displays limited only by your
imagination. Conguring these large video walls is made simple by use
of our Video Wall PC application, allowing the user to visually lay out
and congure the entire video wall at one time in a graphical WYSIWYG
user interface. A number of common video wall arrangement presets are
included with the software by default to make it possible to get started
quickly. Control of the unit is accomplished via front panel controls with
an OSD menu, Telnet, RS-232 or the Video Wall PC software.
2. APPLICATIONS
Public Commercial Displays
Demo Room Displays
Hotel Lobby Information Displays
Live Public Events
3. PACKAGE CONTENTS
1× UHD+2×1 HDMI Video Wall Rotation
1× 24V/2.7A DC Power Adapter
1× Shockproof Feet (Set of 4)
1× Operation Manual
2
4. SYSTEM REQUIREMENTS
HDMI source equipment such as media players, video game consoles
or set-top boxes.
HDMI receiving equipment such as an HDTV, monitor or audio
amplier.
5. FEATURES
HDMI 2.0 and DVI 1.0 compliant (with the use of an HDMI-DVI adapter)
HDCP 1.x and 2.2 compliant
2 HDMI inputs and 1 HDMI output
Supports up to 4K UHD+(18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input
and output
Only 1 to 2 frames of video latency
Supports horizontal/vertical video warping with zooming in/out and
360 degree display rotation in 1° increments (Warping mode)
Supports up to two simultaneous, freely scalable, PiP windows in multi-
windowing modes (Scaling mode)
Seamless switching (no loss of sync to display) when switching sources
with optional crossfade transition (Scaling mode)
Each window can have a border with a selectable colour (Scaling
mode)
Per-input video cropping and chroma key overlay (Scaling mode)
Wide variety of video adjustments, including: contrast, brightness, hue,
sharpness, aspect ratio
Supports the ability to store a multi-window or warping arrangement
as a preset that can be recalled later
Independent audio source selection and routing in all modes
Uploadable and freely positionable graphic logo support
Per-input EDID management with internal or external EDID options
Control of the unit is accomplished by use of front panel buttons with
OSD menu, Telnet, RS-232 or dedicated Video Wall PC software
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
SERVICE POWER
1080P
SCALE MODE
ROTATEOSD
SCALE
ROTATEINFO.
XGA
-
+
MENU ENTER
WIN 1/IN 1 WIN 2/IN 2 OSD INFO.
WARPING
ON/OFF
SOURCE
SELECT
1 2 3 4 56 7 8 9
DS-VWC2-4K22
1SERVICE Port: This port is reserved for rmware update and user
EDID/logo upload use only.
2POWER LED: This LED will illuminate green to indicate the unit is on
and receiving power. When the unit is in stand-by mode the LED will
illuminate red.
3POWER Button: Press this button to power the unit on or place it into
stand-by mode.
Note: Ethernet and RS-232 remain active when the unit is in stand-by
mode.
4SCALE & ROTATE LEDs: One of these LEDs will illuminate to indicate
the unit’s current operational mode.
5MODE Button: Press this button to toggle between Scaling mode
(Scale) and Warping mode (Rotate).
6MENU Button: Press to enter the OSD menu, or to back out from
menu items.
Note: When in Scaling mode, pressing “MENU” and “+” together will reset
the output resolution to XGA (1024×768@60Hz). Pressing “MENU” and “-”
together will reset the output resolution to 1080p@60Hz.
7WIN 1/IN 1 & − (MINUS) & WARPING ON/OFF Button:
Menu Operation: When in a menu, press to move down or adjust
selections within OSD menus.
Scaling Mode: Press to switch window 1’s source in multi-
windowing modes or to select input 1 in Switcher mode.
Warping Mode: Press to enable or disable warping functionality.
8WIN 2/IN 2 & − (PLUS) & SOURCE SELECT Button:
Menu Operation: When in a menu, press to move up or adjust
selections within OSD menus.
Scaling Mode: Press to switch window 2’s source in multi-
windowing modes or to select input 2 in Switcher mode.
Warping Mode: Press to select the input source.
4
9OSD INFO & ENTER Button:
Menu Operation: When in a menu, press to conrm a selection
within the OSD or to go deeper into a menu item.
Scaling/Warping Mode: Press to display information about the
unit on the OSD including details about video, audio and Ethernet.
6.2 Rear Panel
12
HDMI OUTHDMI IN
CONTROLRS-232 DC 24V
1 2 3 4 5
1HDMI IN 1~2 Ports: Connect to HDMI source equipment such as
media players, game consoles, or set-top boxes.
2HDMI OUT Port: Connect to an HDMI TV, monitor, or amplier for
digital video and audio output.
3CONTROL Port: Connect directly, or through a network switch, to
your PC/laptop to control the unit via the control software or Telnet.
4RS-232 Port: Connect directly to a PC, laptop, or other serial control
device with a 3.5mm adapter cable to send RS-232 commands to
control the unit or control it via the control software.
5DC 24V Port: Plug the 24V DC power adapter into this port and
connect it to an AC wall outlet for power.
6.3 RS-232 Pinout and Defaults
Serial Port Default Settings
Baud Rate 19200
Data Bits 8
Parity Bits None
Stop Bits 1
Flow Control None
3.5mm to DE-9
Adapter Cable
RxD
TxD
GND
1
2
3
Tabla de contenidos
Otros manuales de Hardware de computadora de CYP
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
