1. Clean the area where your unit is to be installed with rubbing alcohol and soft
cloth. Allow to dry.
2. Push the pedestal suction cup firmly
onto the connector and then flip the A
lever down to secure the suction cup.
Installation
2
Before you start
Before you start
Installing on Dashboard
This unit is designed to be installed on dashboard or windshield found in every
vehicle. Please install your unit in a safe manner.
NOTE: It is the end-users’ responsibility to install and operate this unit in a manner
accordance to the local, state and federal laws.
A
3. Use the Bknob to adjust
the angle and rotation of the
pedestal for maximum
visibility.
4. Attach the cradle onto the suction
cup.
5. Place your device in the cradle.
Press the front surface of the
cradle toward the mount until it
clicks. The unit is now fixed in the
cradle.
6. Insert the power adapter into the
cigarette jack and connect it to
the DC input of the navigation
cradle to turn on the power.
9
B
DC Car Adaptor
