Cycle Country 25-5070 Manual de usuario

1701 38TH AVE W

PO BOX 229

SPENCER, IA 51301

FAX: 712-262-0248

SERVICE: 800-841-2222

E-MAIL: ccac@cyclecountry.com

YAMAHA

WINCH

MOUNT KIT

Installation

Instructions

KIT NUMBER: 25-5070

CUSTOMER MUST RECEIVE A COPY

OF THIS MANUAL AT TIME OF SALE

#25-5070

Parts List

Please Note: The roller hawse, cable clamp and

cable stop are included with winch.

ITEM NO. QTY. PART NO. DESCRIPTION

1 1 CYC0996 Attaching Bracket

2 1 CYC0902 Roller Hawse Mount Plate

3 2 CYC0835 1" U-Clamp Black

4 2 CYC0848 7/8" U-Clamp Spacer

5 4 PUR1421 5/16" x 1-1/8" x 1-3/4" U-Bolt

6 2 PUR1194 5/16" x 2" Carriage Bolt

7 2 PUR1155 5/16" x 1" Bolt

8 12 PUR1275 5/16" Nylock Nut

THIS WINCH MOUNTING KIT CAN BE USED TO MOUNT EITHER

A CYCLE COUNTRY 1500 WINCH TO YOUR ATV.

**Some components of this kit may be already assembled. All directions referring to right

and left are when the rider is sitting on the machine. Please Note: The roller hawse, cable

clamp, cable stop, and hardware are included with the winch.

KIT #25-5070

WINCH MOUNT INSTALLATION INSTRUCTIONS

1. Remove the U-Bolts and the U-Clamps from the Winch Attaching

Bracket. Place the Winch Attaching Bracket behind the bumper and

attach it to the vertical frame tubes using the U-Bolts. Do not fully

tighten. Place the U-Clamps around the front bumper and tighten all

bolts.

2. Place the Winch on the Winch Attaching Bracket so that the motor is

facing towards the LEFT side of the ATV. Using the 5/16” x 1” Bolts

and Nylock Nuts, secure and tighten the winch.

3. Attach the Roller Hawse Mount Plate to the front bumper of the

ATV using 5/16” x 1-1/8” x 1-3/4” U-Bolts and Nylock Nuts.

Remove one of the long rollers and the two side rollers and feed the winch cable through

the roller hawse. Reinstall the rollers and be sure rollers move freely.

Attach the Roller Hawse to the Roller Hawse Mount Plate using the 3/8” x 1” Bolts and

Nylock Nuts provided with the winch. Tighten all hardware.

See Winch Wiring Instructions supplied with the Winch for proper installation.

CAUTION

BE AWARE OF THE CABLE STOP CONTACTING THE ROLLER

HAWSE WHEN THE CABLE IS WOUND IN.

FAILURE TO RELEASE THE SWITCH MAY CAUSE DAMAGE T

WINCH PARTS OR TO THE ATV.

When using the Winch to raise and lower a Cycle Country Plow, a

Cable Stop must be installed.

Hook the Winch Cable to the CYC0345 (U608) (item #4 on your 15-0001 push tube

kit) through the slotted hole. Carefully raise the blade until the top of the push tube

are no closer than 1” anywhere on the ATV. Place the Cable Stop onto the Winch

Cable up against the Winch Hawse. Secure the Cable Stop to the Winch Cable using

the Cable Clamp Assembly as shown in the pictures below.

ONE YEAR LIMITED WARRANTY

For the period of one year from the purchase date Cycle Country Accessories

Corporation will replace for the original purchaser, free of charge, any part or parts, when

found, upon examination by Cycle Country Accessories Corporation, to be defective in

material, workmanship, or both.

All transportation cost incurred by the purchaser in submitting the material to

Cycle Country Accessories Corporation for replacement under this warranty must be

borne by the purchaser. If Cycle Country Accessories Corporation determines that the

product must be returned to the factory for credit please call 1-800-841-2222 for an RMA

number and shipping instructions.

The warranty does not apply to parts that have been damaged by accident,

alteration, abuse, improper lubrication, normal wear, or other causes beyond Cycle

Country Accessories Corporation’s control. Products such as engines, electric motors,

and actuators may carry an original manufacturer’s warranty. Please call Cycle Country

Accessories Corporation for information.

1701 38TH AVE W

PO BOX 257

SPENCER, IA 51301

PHONE: 712-262-4191

FAX: 712-262-0248

SERVICE: 800-841-2222

E-MAIL: ccac

clecountr

.com

Cycle Country Accessories Corporation has been a world-renowned manufacturer of quality

ATV products since 1981 and we hope you will enjoy your new Cycle Country accessory.

We’re the Industry Snow Blade leader:

42”, 48”, 54”, 60” & 72” Straight Blades

52” & 60” State Plows

Power ‘V’ Blade

If a winch is what you must have, then you’ve come to the right place:

1500lb, 2500lb and 3000lb Winches

We also have an extensive line of winch mounts for both Cycle Country and Warn winches

If you need to haul more gear on your quad, check out our baskets:

Front Basket

Rear Basket

Rear Drop Basket

If you need to mow the trail before you go riding one of these will help:

Our 54” finish cut Quick Silver54 can be mounted in front or towed behind your ATV

The 48” Rough Cut will handle your toughest mowing jobs

The Rough Cut 44 provides an economical way to handle all your mowing needs

If you are into deer hunting and want to make a food plot, you will love our 3 Point

Hitch & Implements:

Rear Blade Moldboard Plow Spreader

Furrower Rake

Cultivator Disk Harrow

And many more accessories to help you Work Hard and Play Hard:

For more information call us at 1-800-841-2222, or on the web at www.cyclecountry.com

Tabla de contenidos

Otros manuales de Cabrestante de Cycle Country

Cycle Country

Cycle Country 25-7030 Manual de usuario

Cycle Country

Cycle Country KAWASAKI Manual de usuario

Cycle Country

Cycle Country 25-3200 Manual de usuario

Cycle Country

Cycle Country 25-3130 Manual de usuario

Cycle Country

Cycle Country 25-1161 Manual de usuario

Cycle Country

Cycle Country 25-9012 Instrucciones de instalación y funcionamiento

Cycle Country

Cycle Country 25-5193 Instrucciones de instalación y funcionamiento

Cycle Country

Cycle Country 25-6020 Manual de usuario

Cycle Country

Cycle Country 25-2140 Manual de usuario

Cycle Country

Cycle Country 25-1200 Instrucciones de instalación y funcionamiento

Cycle Country

Cycle Country 25-3170 Manual de usuario

Cycle Country

Cycle Country POWERMAX 15-0060 Manual de usuario

Cycle Country

Cycle Country 25-1180 Manual de usuario

Manuales populares de Cabrestante de otras marcas

WARRIOR

WARRIOR Trojan 40PUS12 Guía de referencia rápida

SVERO

SVERO 16 Manual de usuario

Warrior Winches

Warrior Winches C10000NH Manual de usuario

Badland Winches

Badland Winches 68146 Manual de usuario

Bush

Bush II Series Manual de usuario

Badland

Badland APEX 5500 Manual de usuario

Quadratec

Quadratec Q9000 Synthetic Manual

C-Max

C-Max VIGO Manual de usuario

Comeup

Comeup DV-9 Manual de usuario

Orvea

Orvea Italwinch 805 Manual de usuario

Prowinch

Prowinch PWJTHF300 Manual de usuario

Clas Ohlson

Clas Ohlson LD2000-A Manual de usuario

Topex

Topex 97X080 Manual de usuario

Eastbound

Eastbound MotoWinch 1707001 Manual de usuario

Runva

Runva EWD8000 Guía de referencia rápida

Ingersoll-Rand

Ingersoll-Rand LIFTSTAR FG 1500/CN Series Guía de instalación

Granit

Granit 11157675 Manual de usuario

TREX

TREX TB75 Manual de usuario