CyberPower MBP60AHVIEC82U Manual de usuario

Userˊs Manual

MBP60AHVIEC82U

(Manual Bypass PDU)

Cyber Power Systems,Inc.

www.cyberpower.com K01-C000256-01

CONTENT:

1. SAFETY .......................................................................................... 1

2. MANUAL BYPASS PDU CONTAINS: ............................................. 2

3. BASIC OPERATION........................................................................ 3

3.1. Manual Bypass Schematic .................................................................3

3.2. Front/Rear Panel Description.............................................................3

3.3. Electrical Specifications.......................................................................4

3.4. Operating Environment .......................................................................4

3.5. Dimensions and Weights ....................................................................4

3.6. Hardware Installation...........................................................................5

3.6.1. Rear Installation:.......................................................................5

3.6.2. Rack Installation: ......................................................................5

4. ELECTRICAL INSTALLATION........................................................ 6

5. UPS MAINTENANCE WITH MANUAL BYPASS MODULE ............. 7

5.1. How to remove the UPS with Manual Bypass Module...................7

5.2. How to return the UPS with Manual Bypass Module......................8

SAVE THESE INSTRUCTIONS. This manual contains important instructions that

should be followed during installation and maintenance of the Manual Bypass

Module and UPS.

1. SAFETY

The system has its own power source when connected to the UPS (UPS battery).

Consequently, the power outlets may be energized even if the system is

disconnected from the AC power source.

Dangerous voltage levels are present within the system.

It should be opened exclusively by qualified service personnel.

The product must be properly grounded, always connect the earth wire first.

The Manual Bypass Module connection instructions and operation described in

the manual must be followed in the indicated order. Disconnection and over

current protection devices shall be provided by others for AC in/out circuits.

CAUTION - To reduce the risk of fire, the unit connects only to a circuit provided

with branch circuit over current protection (please refer to the UPS User Manual

for current rating).

The upstream circuit breaker must be easily accessible.

The unit can be disconnected from AC power source by opening this circuit

breaker, and if still connected to UPS, by previously shutting down the UPS (refer

to the UPS User Manual).

Check that the indications on the rating plate correspond to your AC powered

system and to the actual electrical consumption of all the equipment to be

connected to the system.

Never install the system near liquids or in an excessively damp environment.

Never let a foreign body penetrate inside the system.

Never expose the system to direct sunlight or source of heat.

If the system must be stored prior to installation, storage must be in a dry place.

All repairs and service should be performed by Authorized Service Personnel only.

There are no user serviceable parts inside the Manual Bypass Module.

2. MANUAL BYPASS PDU CONTAINS:

Manual Bypass PDU

User’s Manual

UPS Input Cable(BLUE)

Terminal

UPS Output Cable(GRAY)

Flat Head Screws:

M4X8L*8PCS

Rackmount Ears*2PCS

Round Head Screws:

M3X6L*4PC

3. BASIC OPERATION

3.1. Schematic

3.2. Top/Rear Panel Description

①Manual Bypass Switch

The Manual Bypass Module has a manual Bypass rotary switch with two

UPS

LINE

INPUT

OUTPUT

UPS Input

Connector

MANUAL

BYPASS

SWITCH

UPS Output

Connector

positions:

UPS → the load is supplied by the UPS.

BYPASS → the load is supplied directly by the AC power source.

②UPS Output Connector

Use the connector to attach the Manual Bypass Module to the UPS Output.

③Input / Output Terminal Block

Connect to utility power / your equipment.

④UPS Input Connector

Use the connector to attach the Manual Bypass Module to the UPS Input.

⑤Output Socket

3.3. Electrical Specifications

Line Input

Phase

Single

Voltage

220~240Vac

Frequency

50/60Hz

Rated Current

60A

Output

Voltage

220~240Vac

Frequency

50/60Hz

Rated Current

60A

3.4. Operating Environment

Temperature

Humidity

Storage

temperature

0℃~40℃

<95%

-15℃~50℃

3.5. Dimensions and Weights

Dimensions W×H×D(mm)

Net Weight(kg)

288*88*141

2.8

3.6. Hardware Installation

3.6.1. Rear Installation:

3.6.2. Rack Installation:

4. ELECTRICAL INSTALLATION

This type of connection must be carried out by qualified electrical

personnel.

Refer to the UPS User Manual for circuit breaker current rating

and the cable cross-sections, the circuit breaker has to be

installed upstream the Manual Bypass Module Normal AC source

Before carrying out any connection, check that the upstream

protection device (Normal AC source) is open "O"(Off).

Before proceeding to connect the Manual Bypass Module to the UPS,

make sure the UPS has been properly shut down (refer to the UPS user

manual).

Always connect the ground wire first.

1. Install the “UPS Input Cable” “UPS Output Cable”and “Battery Cable” to the UPS

terminals (refer to the UPS User Manual).

2. Open the Cover of Manual Bypass Switch and verify it is on the "UPS" position.

3. according to the following diagram

a) Connect the input and output wires to the Manual Bypass Module terminals

block.

b) Connect the “UPS Input Cable” and “UPS Output Cable” to the corresponding

connector.

4. Reinstall all Useful safety protection covers

5. Connect the battery cable (refer to the UPS User Manual).

6. Set the Manual Bypass Module upstream Breaker to the "ON" position.

7. Set the UPS Input Breaker to the "ON" position and verify the UPS is in Bypass

mode.

8. Turn on the UPS (refer to the UPS User Manual).

5. UPS MAINTENANCE WITH MANUAL BYPASS MODULE

This operation allows qualified personnel to remove the detachable Manual Bypass

Module from the UPS for routine maintenance or replacement without disrupting power

to connected equipment.

5.1. How to remove the UPS with Manual Bypass Module

1. Put the UPS in internal “Bypass mode” (refer to the UPS user manual)

2. Verify that the UPS is on Bypass mode by checking UPS Display Panel (refer to

the UPS user manual).

DO NOT OPERATE THE MANUAL BYPASS SWITCH IF THE UPS IS NOT

IN BYPASS MODE

3. Set the Manual Bypass Switch to “BYPASS” position after opening the Switch

Cover.

4. Set the UPS Input Breaker to the "OFF" position and wait a few minutes, the UPS

would shut down.

5. UPS stops, the UPS can now be disconnected, as described below:

Disconnect the Battery Cable from Battery module.

Disconnect the UPS Input/Output Cables form the Manual Bypass Module.

6. Replace the UPS.

Hazardous voltage and lost load risk: do not manipulate the Manual

Bypass Switch without UPS connected the Input and Output cables.

5.2. How to return the UPS with Manual Bypass Module

1. Install the “UPS Input Cable” “UPS Output Cable” and “Battery Cable” to the UPS

terminals (refer to the UPS User Manual).

2. Open the Cover of Manual Bypass Switch and check that the Manual Bypass

Switch is on the "BYPASS" position.

3. Connect the Cables to the corresponding connector.

4. Set the UPS Input Breaker to the "ON" position.

5. Verify that the UPS is in Bypass mode by checking display panel (refer to the UPS

User Manual).

DO NOT OPERATE THE MANUAL BYPASS SWITCH IF THE UPS IS NOT

IN BYPASS MODE

6. Set the Manual Bypass Switch to “UPS” position.

7. Turn on the UPS (refer to the UPS user manual).

8. Check the UPS is in Normal mode.

Hazardous voltage and lost load risk: do not manipulate the Manual

Bypass Switch without UPS connected the Input and Output cables.

Cyber Power Systems,Inc.

www.cyberpower.com

6F, No. 32, Sec. 1, Chenggong Rd., Nangang District, Taipei 115, Taiwan

or in part without permission is prohibited. PowerPanel®Business Edition and PowerPanel®

Personal Edition are trademarks of Cyber Power Systems,Inc.

Tabla de contenidos

Otros manuales de Unión Postal Universal de CyberPower

CyberPower

CyberPower Value 600E-GP Manual de usuario

CyberPower

CyberPower 649532815029 Manual de usuario

CyberPower

CyberPower CST150XLU Manual de usuario

CyberPower

CyberPower EX650E Manual

CyberPower

CyberPower Utility Tower Series UPS UP350TE Manual de usuario

CyberPower

CyberPower PR5000ELCDRTXL5U Manual de usuario

CyberPower

CyberPower Value1200EILCD Manual de usuario

CyberPower

CyberPower OLS6KERT4UA Manual de usuario

CyberPower

CyberPower 400E-GP Manual de usuario

CyberPower

CyberPower RB12120X2A Manual de usuario

CyberPower

CyberPower BRG850AVRLCD Manual de usuario

CyberPower

CyberPower 649532715046 Manual de usuario

CyberPower

CyberPower OLS1000ERT2U Manual de usuario

CyberPower

CyberPower BU650E Manual de usuario

CyberPower

CyberPower LX1500GU Manual de usuario

CyberPower

CyberPower OP650 Manual de usuario

CyberPower

CyberPower 649532018253 Manual de usuario

CyberPower

CyberPower 649532012855 Manual de usuario

CyberPower

CyberPower 649532822027 Manual de usuario

CyberPower

CyberPower PR750ELCD Manual de usuario

CyberPower

CyberPower CPS1500AVR Manual de usuario

CyberPower

CyberPower XC625 Manual de usuario

CyberPower

CyberPower BRG850 Manual de usuario

CyberPower

CyberPower EC450G Manual de usuario

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

Eaton

Eaton 3S Instrucciones de montaje

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario

ZincFive

ZincFive BC Series Manual de usuario

BPC

BPC 1.5K SMART Manual de usuario

IBM

IBM 5595-1AX Manual de usuario