Curtis VR245 Manual de usuario
0
1
Contents
Contents…………………………………………………………………………………………………1
Function Description: ………………………………………………………………………………….2
Notice for use…………...………………………………………………………………………………2
System requirements…………………………………………………………………………………..4
Start to use………………………………………………………………………………………………5
1. Appearance and Buttons………………………………………….……………………5
2. Basic operation…………………………………………………………………….……7
Application of Attached ArcSoft VideoImpression…………………………………………………14
Introduction interface for software installation…………………………………………………….14
Xvid codec Installation………………………………………………………………………………15
MediaImpression Installation and Use……………………………………………………………..17
Product specifications……………………………………………………………………………..…23
Standard accessories………………………………………………………………………………...24
2
Function Description
Welcome to purchase and use this digital video camera. Before use, please read this user
manual carefully.
With this digital video camera, you can take video clips and still photo. With the playback
function, you can playback the taken video with this digital video camera; in addition, you can
download the video from the digital video camera into your PC. When prepared, this user
manual refers to the latest information. The screens and illustrations etc in this user manual
are to particularly and visually detail the operation of the digital video camera. Due to
technology development and different production batches, the digital video camera herein may
be different from that you buy and use.
Noticeforuse
General:
1. Never open the housing of the digital video camera; otherwise, some parts may cause
electric shock.
2. Damp, pressure, collision and overheat may damage this digital video camera.
Memory and storage:
1. SD/MMC/SDHC can be used (but not included in the packing list and maximal capacity
16GB).
2. When buying SD/MMC/SDHC card, be sure to take the digital video camera with you so as
to ensure compatibility.
3. When SD/MMC/SDHC card is inserted, the memory of the digital video camera will not
function.
4. SD card has a write-protect switch, which can be used to prevent wrong deletion of data.
When this switch is pushed to the bottom and locked, the data in the card will be protected.
However, when the card is in write-protect state, it cannot be used for shooting or deletion etc.
3
5. These memory cards cannot be used for permanent storage of data. You must copy the
documents in the digital video camera in the proper storage position.
6. When storing documents into the memory or the memory card, make sure that the size of
the documents does not exceed the capacity of the memory.
Maintenance and care:
1. In use, always wear the wrist band so as to prevent slip.
2. Use proper protection sheath to avoid scratching the lens and screen.
3. To clean the lens, firstly blow away the dust on its surface, then use proper cloth or tissue for
optical devices to clean the lens. If necessary, use lens cleanser. Never use organic cleanser
to clean the digital video camera.
4. Never touch the lens with fingers.
5. When left idle for long, keep the digital video camera with the battery taken out in dry and
dark place.
Other notices:
1. When switching video output between LCD display and video devices, be sure to exit from
the play or record state.
2. This digital video camera is suitable the environment between 0- 40(32-104). Never
keep the digital video camera in the place at extremely high temperature, such as in the car
parking under the burning sun, or with much damp. In order to prevent the digital video camera
from condensation, when moving from a cold place to a warm place, be sure to keep it in
sealed plastic bag, and open the bag and take it out when the digital video camera reaches the
indoor temperature.
3. TV programs, movies, music, images and other resources may be protected by copyright;
therefore, without prior permission, the shooting/use of these resources may violate copyright
laws and regulations related. Please note that the resources under the protection of copyright
can be used within the permission of related laws and regulations.
4
Systemrequirements
When operating and using this digital video camera, be sure to meet the requirements on the
basic system for computer. It is strongly recommended to use the best computer units to
operate the camera so as to bring its functions into full play. Below are the requirements on the
basic system:
Operation System Microsoft Windows 2000,XP, vista, Windows7
CPU Above Intel PIII667 or CPU of equal performance
Memory Above 128 MB
Sound card and display card DirectX8 or above.
CD-ROM 4× speed or above
Hard Disk 1 GB space above useable
Other One standard USB 1.1 or USB 2.0 port
5
Starttouse
1. Appearance and Buttons
LCD
Delete ke
y
Mode ke
y
Up key
Right key
Left key
S
hutte
r
/OK key
Down key
6
USB Connecto
r
Power Ke
y
T
V Out Port
HDMI Out Port
S
D/MMC
Card Slot
S
peake
r
Strap Holde
r
Microphone
Bus
y
LED
Lens
Batter
y
Cove
r
Tripod
USB Switch
7
2. Basic operation
2.1 Install battery
Press / slide down the Battery Cover and insert lithium battery. Align with correct polarity of
battery terminals. Close the Battery Cover.
2.2 Charge Battery
1. Power off the camera.
2. Connect the camera to the computer USB port or the power adapter (not include) with
USB cable to charge the battery.
3. During charging, Busy light is on and will be off when the battery is fully charged.
2.3 Use SD/MMC/SDHC card
Insert the SD Memory card into the SD/MCC/SDHC Card Slot. Push it down until the card
stays latched. Do not force – check card’s position according to the position mark on the
8
camera.
Push and release inserted card if you wish to remove or replace the
card.
Turn your camcorder OFF before inserting / removing the SD Card.
- Note that the SD Card has a tiny LOCK switch on the side. Set the
switch to un-LOCK position to be able to store recorded videos, still
pictures on inserted SD Memory Card.
2.4 Power on/off
In power-off state, press and hold the power key to power on the camera.
In power-on state, press the power key to power off the camera.
In power-on state, let the camera idle for 1 minute（default）to power off the camera
automatically.
In power-on state, when battery level is very low, the camera will turn off after several
seconds. You must replace the batteries.
2.5 Setup menu
In power-off state, press and hold Shutter key then press POWER key turn on the
camera, until enter set day and time mode, then press the Left/Right key to move the cursor,
9
press the up key or down key to adjust the value. at this mode, you can view the
Firmware version too.
2.6 Change mode
After power on, it will enter video record mode, press MODE key to change mode
between video record, Still photo record, Playback;
2.7 Video record
In Video record mode, press shutter key to start video recording, While recording, press the
shutter key again to stop recording.
At preview mode, press Left or Right key can change the video size between HD(1280x720),
D1(720x480), VGA(640x480); Press up key or down key can zoom in or zoom out the
image.
2.8 Still photo record
In Still photo record mode, Press Shutter key can snap one photo,
At preview mode, press Left or Right key can change the video size between
3.1M(2048X1536), 1.3M(1280x960), VGA(640x480); Press up key or down key can zoom in
or zoom out the image.
Tabla de contenidos
Otros manuales de Videocámara de Curtis
Manuales populares de Videocámara de otras marcas
Panasonic
Panasonic AG-HMC152EN Manual de usuario
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario
MYDLINK
MYDLINK DCS-6100LH Manual de usuario
Sony
Sony video Hi8 Handycam CCD-TR555 Manual de usuario
SECURECOM
SECURECOM V-5014B Manual de usuario
Panasonic
Panasonic HDC-SD100 Manual de usuario
