CURRENT Luxury SilenTrac Instrucciones de funcionamiento
1
SETUP WITH THE BRIDGE AND APP………………………………………...........................………….…….Page 2
SETUP WITH THE BRIDGE (NO APP)…………………………………….........................……………..…….Page 3
CHANGE POSITIONS ON THE DRAPERY TRACK (SINGLE)…………………....................…….…….Page 4
CHANGE POSITIONS ON THE DRAPERY TRACK (DUAL)…………………....................…….……….Page 6
CHANGE THE OPEN POSITION FOR THE WINDOW SIDE DRAPERY (MOTOR 2)…..............Page 8
CHANGE THE CLOSE POSITION FOR THE WINDOW SIDE DRAPERY (MOTOR 2)….............Page 9
PAIR THE REMOTE TO THE DRAPERY (ZIGBEE)…………………………………….....................…..Page 10
INTEGRATE WITH AMAZON ECHO OR ECHO PLUS ZIGBEE USING THE CURRENT PRODUCTS
CORP BRIDGE………………………………………………………………......................................................…...Page 11
INTEGRATE WITH AMAZON ECHO PLUS- USE ALEXA’S BUILT IN ZIGBEE HUB….............Page 12
INTEGRATE WITH GOOGLE HOME - ZIGBEE USING THE CURRENT PRODUCTS CORP
BRIDGE………………………………………………………………………………………..................................…...Page 13
SILENTRAC REMOTE PROGRAMMING INSTRUCTIONS WITHOUT A BRIDGE….….............Page 15
PAIR THE REMOTE TO THE DRAPERY (FM)………………………………………….....................……Page 18
ENABLE OR DISABLE SMART ASSIST……………………………………………………............................Page 19
GROUPING MULTIPLE DRAPERY TOGETHER……………………………......................…….…………Page 20
REMOVE THE DRAPERY FROM A NETWORK……………………………….........................….……….Page 21
MASTER RESET THE DRAPERY……………………………………………………...........................….…….Page 22
2
Setup with the bridge and app
Plug in the bridge.
2x
Hit the + to add a device.
Beach House
Scan the QR Code on the bottom of the bridge.
Pull down and release the pendant twice.
1. Download the App
Download the MyCurtains App from the google play store (for
Android) or the App Store (for Apple devices). Click
“Register Account” to create user account. Open, app and select
add bridge.
2. Name your Bridge
Proceed to name your Bridge (make sure that your location
services on your phone are enable and permissions have been
granted to the Mycurtains app.)
3. Connect Power to Bridge
Find an outlet in a location central to the drapery you are
installing in the home. Insert the micro-usb end of the included
power cable into the power port on the bridge. Plug the other
end of the cable into an outlet.
4. Enable Bluetooth
Make sure that Bluetooth is enabled on your phone and permis-
sions have been granted to the Mycurtains app.
5. Put Bridge into Pairing Mode
Press and release the button on the back of the bridge for one sec-
ond using a paper clip. A solid blue light will turn on while the
bridge is in discover mode.
6. Connect the Bridge
Scan QR code on back of the bridge by using camera needs
camera permissions) or enter code manually.
7. Connect to Wi-Fi
Choose from the list of available Wi-Fi networks to connect the
bridge and enter the Wi-Fi password.
8. Learn the Devices
In the app under devices, hit the + sign.
Pull down and release the Pendant twice on the drapery you
want to pair to the bridge. You will see the device pop up in the
menu on your Smart Phone screen.
Select the appropriate device, using the “identify” button if needed.
Once the device has been selected, name the device.
Repeat step 8 for all new devices.
Press and release the button on the back of the bridge.
Connect your bridge to your local wifi.
3
Setup with the bridge (No App)
1. Connect Power to Bridge
Find an outlet in a location central to the drapery you are installing
in the home. Insert the micro-usb end of the included power cable
into the power port on the bridge. Plug the other end of the cable
into an outlet.
2. Put Bridge into Pairing Mode
Push a tack or pen into the hole in the back of the bridge to depress
3. Pair Drapery
On any drapery you would like to pair to the bridge pull down
and release the Pendant once to start the drapery, then once
again The drapery will jog along with t
indicate the
drapery has been paired.
Plug in the bridge.
Press and release the button on the back of the bridge.
Pull down and release the pendant twice.
2x
4
3. EXIT LEARN OPEN POSITION MODE
Pull down and release the Pendant once to exit learn mode.
The
Change the open Position
1. ENTER LEARN OPEN POSITION MODE
Pull down and release the Pendant so the drapery moves
towards the direction you would like to set as the “open” position.
Pull down and release the Pendant
Pull the drapery by hand to the desired full open position
2. SET THE OPEN POSITION
By hand, pull the drapery until it reaches the desired open
position.
Pull down and hold the Pendant for 5 seconds, then release
Pull down and release the Pendant
Change Positions on the drapery Track (Single)
For additional help during installation of your drapery track, visit www.currentproductscorp.com/support/drapery-track
or call 1-844-307-7435.
After the drapery reaches it’s current open position, it will stop
the drapery jogs.Then Release the Pendant.
5
3. EXIT LEARN CLOSE POSITION MODE
Pull down and release the Pendant once to exit learn mode.
The
Change the Close Position
1. ENTER LEARN CLOSE POSITION MODE
Pull down and release the Pendant so the drapery moves
towards the direction you would like to set as the “close” position.
2. SET THE CLOSE POSITION
By hand, pull the drapery until it reaches the desired close position.
Pull down and release the Pendant to close drapery
Pull the drapery by hand to the desired full close position
Pull down and hold the Pendant for 5 seconds, then release
Pull down and release the Pendant
After the drapery reaches the position, it will stop moving. Pull
jogs.
Release the Pendant.
6
Change the open Position for the Room Side drapery (Motor 1)
2. SET THE OPEN POSITION
By hand, pull the curtain until it reaches the desired open position.
3. EXIT LEARN POSITION MODE
Pull down and release the Pendant once to exit learn mode.
The
1. ENTER LEARN OPEN POSITION MODE
Pull down and release the Pendant so the room side drapery moves
towards the direction you would like to set as the “open”
position.
Pull down Pendant to move room side drapery
to open position
Change Positions on the drapery Track (dual)
Pull down and hold the Pendant for 5 seconds, then release
Pull the drapery by hand to the desired full open position
Pull down and release the Pendant
After the drapery reaches the position, it will stop moving. Pull
jogs. Then release the Pendant.
7
Change the Close Position for the room side drapery (MOTOR 1)
1. ENTER LEARN CLOSE POSITION MODE
Pull down and release the Pendant so the drapery moves
towards the direction you would like to set as the “close” position.
Pull down and hold the Pendant for 5 seconds, then release
2. SET THE CLOSE POSITION
By hand, pull the curtain until it reaches the desired close position.
3. EXIT LEARN CLOSE POSITION MODE
Pull down and release the Pendant once to exit learn mode.
The
Pull down Pendant to move room side drapery to
closed position
Pull the drapery by hand to the desired full closed position
After the drapery reaches the position, it will stop moving. Pull
jogs.Then release the Pendant.
Pull down and release the Pendant
8
2. SET THE OPEN POSITION
By hand, pull the drapery until it reaches the desired full
open position.
3. EXIT LEARN OPEN POSITION MODE
Lift up and release the Pendant once to exit learn mode.
The
1. ENTER LEARN OPEN POSITION MODE
Lift up and release the Pendant so the
drapery moves towards the direction you would like
to set as the “open” position.
Lift up and hold Pendant for 5 seconds, then release
Lift up and release Pendant to move drapery to
open position
Pull the drapery to full open position
Pull down and release Pendant
After the drapery reaches the position, it will stop moving. Lift up
Then release the Pendant.
CHANGE THE OPEN POSITION FOR THE WINDOW SIDE DRAPERY (MOTOR 2)
9
2. SET THE CLOSE POSITION
By hand, pull the drapery until it reaches the desired full
close position.
3. EXIT LEARN CLOSE POSITION MODE
Lift up and release the Pendant once to exit learn mode.
The
Change the Close Position for the window side drapery (Motor 2)
1. ENTER LEARN CLOSE POSITION MODE
Lift up and release the Pendant so the drapery moves towards the
direction you would like to set as the “close” position.
Lift up and hold Pendant for 5 seconds, then release
Pull drapery to full closed position
Lift up and release Pendant to move drapery to
closed position
Pull down and release Pendant
After the drapery reaches the position, it will stop moving. Lift up
Release the Pendant.
10
Pair the Remote to the drapery (Zigbee)
2. Initiate Learn Mode on Drapery
Pull down and release the Pendant twice to enter learn mode.
should stop it.
3. Connect the Remote to the Drapery
On multi-channel remotes, select the channel you wish to pair to by
pressing the Channel button until the LED corresponding with the
appropriate channel is lit.
Depress the “programming” button on the back of the remote by
pushing a pen or other object through the hole in the back of
the remote. The LEDs on the front will scroll.
Press and release the top left button on the remote. The drapery
Pull down and release the Pendant twice.
Press the channel button until the desired channel is selected.
Press and release the back button on the remote.
Press and release the top left button to pair
1. Connect Remote to Bridge
If using the Current Products Corp. bridge, use a tack or other
object to depress and hold the recessed button on the bottom of
Pull the “Pull” tab from the bottom of the remote. Next, push any
button on the face of the remote. The LEDs should scroll to show
the bridge.
Push any button on the face of the remote.
Press and release the back button on the bridge.
2x
Otros manuales para SilenTrac
1
Tabla de contenidos
Otros manuales de Persiana de ventana de CURRENT Luxury
Manuales populares de Persiana de ventana de otras marcas
Domondo
Domondo PureNight Manual de instrucciones de instalación
rollease acmeda
rollease acmeda Easy Spring Air Guía de configuración
IKEA
IKEA KADRILJ Manual de usuario
Hallis Hudson
Hallis Hudson Rolls Super glide Manual de usuario
Benthin
Benthin P1614 Manual de usuario
MV LINE
MV LINE CLARA 015 Manual de instrucciones
