CUE keypadCUE-1G Manual de usuario
CUE a.s.,Na Dolinách 6, 147 00 Praha 4, Czech Republic
fax: +420 241 432 446
www.cuesystem.com
e-mail: info@cue.cz
phone: +420 241 433 555
User Manual
Wall Mounted Keypads
Version 01
User Manual Wall Mounted Keypads
UM019_01, 01.04.2003
Copyright © CUE, a.s., Praha, Czech Republic 1990 - 2003.
All rights reserved. Specifications are subject to change without prior notice.
User Manual Wall Mounted Keypads
www.cuesystem.com
Page 3 of 22
Table of Contents
1. Introduction .................................................................................................................................... 4
1.1. Overview .......................................................................................................................................................................4
1.2. Models...........................................................................................................................................................................4
1.3. Features ........................................................................................................................................................................4
1.4. Programming.................................................................................................................................................................4
2. Front Panel ..................................................................................................................................... 5
3. Button Labels ................................................................................................................................. 6
4. Addressing ..................................................................................................................................... 7
5. Mounting......................................................................................................................................... 9
6. Connecting ................................................................................................................................... 10
7. Specifications and Mechanical Drawings ................................................................................. 11
7.1. keypadCUE-1G ...........................................................................................................................................................11
7.2. keypadCUE-2G ...........................................................................................................................................................13
7.3. keypadCUE-3G ...........................................................................................................................................................15
8. Software and Firmware License................................................................................................. 17
9. Warranty Conditions ................................................................................................................... 18
10. CE Declaration of Conformity..................................................................................................... 19
11. FCC................................................................................................................................................ 20
User Manual Wall Mounted Keypads
www.cuesystem.com
Page 4 of 22
1. Introduction
1.1. Overview ....................................................................
There simply isn’t anything that compares with the beautiful, elegant and powerful wired keypadCUEs.
The models are keypadCUE-1G, keyapadCUE-2G and keypadCUE-3G. These programmable wall
mounted control panel devices are designed to be built into a standard 1-gang, 2-gang or 3-gang
electrical boxes.
All buttons are supported with backlight, programmable indication and user changeable button labels
that can be printed on a laser printer and inserted into the keypad. The full-function console keypads
may be used as dedicated wired controllers for audio, video and environmental functions.
1.2. Models........................................................................
This User Manual describes products itemized in table below.
Model Product code Description
keypadCUE-1G CS0221 Wall mounted keypad, (8) buttons
keypadCUE-2G CS0222 Wall mounted keypad, (16) buttons
keypadCUE-3G CS0223 Wall mounted keypad, (24) buttons
1.3. Features .....................................................................
•Backlight buttons with programmable feedback indication
•20-LEDs bar graphs
•User changeable button labels
•Stainless steel front panel
•Mounting to 1-gang, 2-gang or 3-gang standard electrical box
•System connection by CUEwire
1.4. Programming .............................................................
All keypads are programmed using Cue Director programming tool. Control commands are described
in the Programming Manual CPL References, chapter Keyboards.
User Manual Wall Mounted Keypads
www.cuesystem.com
Page 5 of 22
2. Front Panel
The front panel is equipped with buttons and bar graphs. The number of buttons and bar graphs
depends on a type of keypad hereby
•keypadCUE-1G has (8) buttons and (1) bar graph
•keypadCUE-2G has (16) buttons and (2) bar graphs
•keypadCUE-3G has (248) buttons and (2) bar graphs
7 8
1 2
13 14
19 20
9
3
15
21
10 11
4 5
16 17
22 23
12
6
18
24
5 6
1 2
910
13 14
7 8
3 4
11 12
15 16
3 4
1 2
5 6
7 8
121 2
(8) buttons (16) buttons (24) buttons
bargraph 20-LEDs (2) bargraphs 20-LEDs (2) bargraphs 20-LEDs
All buttons have low and high intensity levels of the red back light. All buttons are set to low back light
intensity after keypad switch on. The back light intensity level can be changed for each button
independently from a control unit by a program commands. High level is used for a status indication.
Bar graphs are equipped with (20) LEDs and they are controlled by special programming commands
from a control unit.
User Manual Wall Mounted Keypads
www.cuesystem.com
Page 6 of 22
3. Button Labels
All models use one big label foil for all buttons.
Steps
1. Prepare the foil using the layout AutoCAD files named
•CS0221.0011.2-Foil.dwg for keypadCUE-1G
•CS0222.0011.2-Foil.dwg for keypadCUE-2G
•CS0223.0011.2-Foil.dwg for keypadCUE-2G
These files are available on www.cuesystem.com.
TEXT
TEXT
TEXT
TEXT
TEXT
TEXT
TEXT
TEXT
T0,1[0,003937]
TEXT
TEXT
TEXT
TEXT
TEXT
TEXT
TEXT
TEXT
TEX T
TEX T
TEX T
TEX T
TEXT
TEXT
TEXT
TEXT
T0,1[0,003937]
TEXT
TEXT
TEXT
TEXT
TEX T
TEX T
TEX T
TEX T
TEXT
TEXT
TEXT
TEXT
TEXT
TEXT
TEXT
TEXT
TEX T
TEX T
TEX T
TEX T
TEXT
TEXT
TEXT
TEXT
T0,1[0,003937]
keypadCUE-1G keypadCUE-3G keypadCUE-3G
2. Print the foil on a standard printer.
3. Cut the foil into a shape according the picture (see above).
4. Put the keypad on a table face down.
5. Unscrew hex nuts marked on the picture below.
PCB
17654328
17654328
PCB
17654328
PCB
keypadCUE-1G rear view keypadCUE-2G rear view keypadCUE-3G rear view
(4) hex nuts (4) hex nuts (4) hex nuts
6. Dismount the electronic boards.
7. Insert new label foil.
8. Insert the electronic board.
9. Screw hex nuts marked on the picture above.
User Manual Wall Mounted Keypads
www.cuesystem.com
Page 7 of 22
4. Addressing
The BUTTON_ID transmitted by a keypad and BARGRAPH_ID are numbers used in the programming
for button and bar graph identification. Both values depend on a button or bar graph position and it
depends on a keypad ADDRESS too. Both values are calculated according formulas
BUTTON_ID = Offset + Button Code
BARGRAPH_ID = Offset + Bar Graph Code
Offset = 32 * ADDRESS
The lowest BUTTON_ID is generated by a button in the upper left corner the highest BUTTON_ID is
generated by a button in the lower right corner. The left bar graph has lower BARGRAPH_ID the right
bargraph has higher BARGRAPH_ID - see example for ADDRESS = 0 on the next picture.
7 8
1 2
13 14
19 20
9
3
15
21
10 11
4 5
16 17
22 23
12
6
18
24
5 6
1 2
910
13 14
7 8
3 4
11 12
15 16
3 4
1 2
5 6
7 8
Button Code = 1
Bargraph Code = 1
Bargraph Code = 1
Bargraph Code = 2
Bargraph Code = 1
Bargraph Code = 2
Button Code = 1 Button Code = 1
In the table below there are examples of BUTTON_ID range and BARGRAPH_ID range.
keypadCUE-1G keypadCUE-2G keypadCUE-3G
ADDRESS BUTTON_ID
range
BARGRAPH
_ID range
BUTTON_ID
range
BARGRAPH_ID
range
BUTTON_ID
range
BARGRAPH_ID
range
0 1 8 1 1 16 1 2 1 24 1 2
1 33 40 33 33 48 33 34 33 56 33 34
2 65 72 65 65 80 65 66 65 88 65 66
3 97 104 97 97 112 97 98 97 120 97 98
4 129 136 129 129 144 129 130 129 152 129 130
5 161 168 161 161 176 161 162 161 184 161 162
6 193 200 193 193 208 193 194 193 216 193 194
7 225 232 225 225 240 225 226 225 248 225 226
8 257 264 257 257 272 257 258 257 280 257 258
9 289 296 289 289 304 289 290 289 312 289 290
...
255 8161 8168 8161 8161 8176 8161 8162 8161 8184 8161 8162
User Manual Wall Mounted Keypads
www.cuesystem.com
Page 8 of 22
The ADDRESS of the keypad is binary coded by DIP switch located on the rear side of the keypad.
The ADDRESS can be set in the range 0 to 255.
Switch view Switch nr. Function
SW1 ADDRESS bit 0
SW2 ADDRESS bit 1
SW3 ADDRESS bit 2
SW4 ADDRESS bit 3
SW5 ADDRESS bit 4
SW6 ADDRESS bit 5
SW7 ADDRESS bit 6
ON
17654328
SW8 ADDRESS bit 7
ADDRESS SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
0 OFF OFF OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF
9 ON OFF OFF ON OFF OFF OFF OFF
...
255 ON ON ON ON ON ON ON ON
User Manual Wall Mounted Keypads
www.cuesystem.com
Page 9 of 22
5. Mounting
Steps are
1. Fix the Mounting Bracket (delivered) to the Standard electrical box (not delivered) using
screws (not delivered). You need
•(2) screws for keypadCUE-1G
•(4) screws for keypadCUE-2G
•(4) screws for keypadCUE-3G.
2. Clap carefully the keypad to the Quarter Turn Fasteners located on the Keypad Holder.
3. Push the front panel of the keypad. The Quarter Turn Fasteners must clap accurately.
Screws
Mounting Bracket
(delivered)
Keypad
Standard electrical box
1-gang for keypadCUE-1G
2-gang for keypadCUE-2G
3-gang for keypadCUE-3G
Quarter Turn Fastener
User Manual Wall Mounted Keypads
www.cuesystem.com
Page 10 of 22
6. Connecting
All models of the keypad are connected to the system by CUEwire. The 4-pin connector is located on
the rear side of the keypad.
1 432
CUEwire CUEwire
keypadCUE-1G, keypadCUE-2G keypadCUE-3G
Pin connection of the CUEwire connector is described in the following table.
CUEwire, 4-pin connector
Pin 1 +24 VDC
Pin 2 GND
Pin 3 A+
Pin 4 B-
1234
1 432
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Teclado de CUE
