GPSteer Quick Reference Guide
Part Number: 875-0140-000
Settings
How to: Changing Settings
New AB Line Erases old A|B line and returns display to
“Ready for A.”
Straight 000
0.00
Menu
New AB Line
Contour Mode
Next Field
Swath Setup
System
Status Disp
Contour
Mode Selects Contour mode and returns display to
guidance screen. If Contour mode is the
current mode, Straight mode will be displayed
in the menu (allowing you to switch to Contour
mode).
Straight
Mode Selects Straight mode and returns display to
guidance screen. If Straight mode is the
current mode, Contour mode will be displayed
in the menu (allowing you to switch to Straight
mode).
Next Field Erases all swaths and A and B points and
returns display to “Ready for A.”
Swath Setup Allows selection of swath width (in meters) and
steering type (Skew or Offset). Press
to return to the guidance screen.
System Allows selection of system options: units (feet
or meters), display options, lightbar options,
GPS options, and steering calibration options.
Status Disp Provides GPS status information.
