10
Howto Arm the System when StayingHome
• Armingthe System in Stay Mode
Thistypeofarming isused when peoplearepresent within theprotected area. At night
time, when thefamilyisabouttoretire,perimeter zonesareprotected, but not theinterior
zones.Consequently, interior movements will be ignored bythe system.
Whenthe systemisReady,press<STAY> , enter user code, andthen <ENTER>.
The Aindicator flashestoindicate that the systemis armed in staymode .
• Quick Stay
Whenenabled bytheinstaller,press <STAY>toarmthe system.
During exitdelayyoucanleavethepremises.Ifyou wishtostayorthat noonewillenter
theprotected premises,youmaycancel theEntry/exitdelaybypressing the<ENTER>
key. The slow beeping stops andthe systemis immediatelyarmed.
The Aindicator flashestoindicate that the systemis armed in staymode .
(Theindicatorsmaygoout afewsecondsafterexit delayexpired,depending on the
installer'ssetting).
• Disarmingthe System
Enter user’s code andpress <ENTER>, or press <STAY>if enabledbyinstaller.
The Aindicator goes off toindicatethat the systemisdisarmed.
Howto Arm Partitions
Theprotected areacan begrouped intotwo separatepartitions(Aand B). Thesystem
can begrouped forUser ‘s conveniencetoseparate, in abusiness environment, theoffices
fromthewarehousearea, orinaprivateresidence, thedifferent roomsofthehome, e.g.,
living room, bedroom, etc.
To arm partitionAenter usercodefor partitionA
To arm partitionBenter usercodefor partitionB,
Note:toarming partition with code see page7 “How toarmthesystembeforeexit”
During exitdelayyou can leavepremises.At theendoftheproceduretheAindicator or
the B indicator lights upto indicate thatthepartition A and/orB is armed.
(Theindicators maygoout after a fewseconds, dependingon the installer'ssetting).
Todisarmpartition,see"Disarmingthe System".
