Crestron Green Light DIN-HUB Cómo utilizar
CrestronGreenLight™
DIN-HUB
DINRailCresnet®DistributionHub
Operations & Installation Guide
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2008 Crestron Electronics, Inc.
Crestron DIN-HUB DIN Rail Cresnet®Distribution Hub
Contents
Crestron Green Light™ DIN Rail Cresnet®Distribution Hub: DIN-HUB 1
Introduction ...............................................................................................................................1
Features and Functions................................................................................................1
Applications.................................................................................................................3
Specifications ..............................................................................................................4
Physical Description....................................................................................................5
Industry Compliance ...................................................................................................8
Setup..........................................................................................................................................9
Network Wiring...........................................................................................................9
Installation...................................................................................................................9
Hardware Hookup .....................................................................................................11
Problem Solving ......................................................................................................................13
Troubleshooting.........................................................................................................13
Check Network Wiring..............................................................................................14
Reference Documents................................................................................................15
Further Inquiries........................................................................................................16
Future Updates ..........................................................................................................16
Return and Warranty Policies..................................................................................................17
Merchandise Returns / Repair Service ......................................................................17
CRESTRON Limited Warranty.................................................................................17
Operations & Installation Guide – DOC. 6671A Contents •i
Crestron DIN-HUB DIN Rail Cresnet®Distribution Hub
Crestron Green Light™ DIN Rail
Cresnet®Distribution Hub:
DIN-HUB
Introduction
The DIN-HUB is a DIN rail-mounted Cresnet®hub designed to facilitate
the configuration of large Cresnet networks. DIN rail mounting enables
modular installation alongside Crestron®DIN Rail lighting and
automation control modules and other third party DIN rail mountable
devices.
Features and Functions
• Three-segment Cresnet hub
• Recommended for large Cresnet networks*
• Configurable power distribution
• No programming required
• 6M wide DIN rail mounting
* Use of a DIN-HUB is advised whenever the number of Cresnet devices on a
network is greater than 20 or when the combined total length of Cresnet cable
exceeds 914 meters (3000 feet).
Operations & Installation Guide – DOC. 6671A DIN Rail Cresnet Hub: DIN-HUB •1
DIN Rail Cresnet®Distribution Hub Crestron DIN-HUB
Three-Segment Cresnet Hub
Cresnet is the communications backbone for Crestron lighting modules,
wall box dimmers, shade controllers, thermostats, keypads, touchpanels,
and many other devices. This flexible 4-wire bus normally supports
approximately 20 Cresnet devices without requiring a hub. Larger
systems are easily enabled by adding the DIN-HUB. The DIN-HUB
features three isolated Cresnet segments, each supporting an additional
20 devices, allowing for systems of approximately 80 devices total
(including the “host” segment). More hubs may be added to allow up to a
maximum potential of 252 devices.*
* The actual number of possible devices per segment and per network may vary
depending upon the amount of data traffic, the length and geometry of network
wiring, and the power requirements of every device. A general rule of thumb
suggests approximately 20 devices, an aggregate of 914 meters (3000 feet) of
cable, and up to a 75 Watt load per segment (wiring and devices permitting). In
any case, 252 is the maximum number of possible devices on a complete Cresnet
network. Contact Crestron True Blue Support
(www.crestron.com/true_blue_support) for further design assistance.
Cresnet Power Distribution
In addition to data, Cresnet carries 24 Volts DC for powering the devices
connected to it. The DIN-HUB provides an easy way to manage the
distribution of power for a complete Cresnet network. Each segment can
be configured to receive its power from the “host” power source or from
another power supply. Separate power supplies may be dedicated to each
segment, or a single supply can be shared amongst multiple segments as
needed. Each segment supports up to 75 Watts.
DIN Rail Installation
The DIN-HUB is designed to snap onto a standard DIN rail for
installation in a wall mount enclosure or mounted on a wall panel. Wiring
connections are made using detachable screw terminals positioned along
the top and bottom, clearly accessible from the front for easy installation
and servicing. Diagnostic indicators are positioned on the center front
panel. When installed in an enclosure utilizing 45 mm cutouts, the
DIN-HUB’s front panel stays visible while the connections are
concealed.
2 •DIN Rail Cresnet Hub: DIN-HUB Operations & Installation Guide – DOC. 6671A
Crestron DIN-HUB DIN Rail Cresnet®Distribution Hub
Applications
The following diagram shows a DIN-HUB in a typical application.
DIN-HUB in a Typical Application
Operations & Installation Guide – DOC. 6671A DIN Rail Cresnet Hub: DIN-HUB •3
DIN Rail Cresnet®Distribution Hub Crestron DIN-HUB
Specifications
Specifications for the DIN-HUB are listed in the following table.
DIN-HUB Specifications
SPECIFICATION DETAILS
Power Requirements
Cresnet Power Usage
0.6 Watts
(0.03 Amp @ 24 Volts DC)
Maximum Load per
Segment 75 Watts
(3.13 Amps @ 24 Volts DC)
Environmental
Temperature
Humidity
Heat Dissipation
0° to 40°C (32° to 104°F)
10% to 90% RH (non-condensing)
2 BTU/Hr
Enclosure Light gray polycarbonate housing
with polycarbonate label overlay,
UL94 V-0 rated, 35 mm DIN EN
60715 rail mount, DIN 43880 form
factor for enclosures with 45 mm
front panel cutout, occupies 6 DIN
module spaces (108 mm)
Dimensions
Height
Width
Depth
94.2 mm (3.71 in)
106 mm (4.17 in)
58.0 mm (2.28 in)
Weight 155 g (5 oz)
Available Accessories
DIN-BLOCK
DIN-PWS50
DIN Rail Cresnet Distribution
Block
DIN Rail 50 Watt Cresnet Power
Supply
4 •DIN Rail Cresnet Hub: DIN-HUB Operations & Installation Guide – DOC. 6671A
Crestron DIN-HUB DIN Rail Cresnet®Distribution Hub
Physical Description
This section provides information on the connections, controls and
indicators available on your DIN-HUB.
DIN-HUB Physical View
DIN-HUB Overall Dimensions
106 mm
(4.17 in)
94.2 mm
(3.71 in)
90 mm
(3.54 in)
58 mm
(2.28 in)
1
2
3
Operations & Installation Guide – DOC. 6671A DIN Rail Cresnet Hub: DIN-HUB •5
DIN Rail Cresnet®Distribution Hub Crestron DIN-HUB
Connectors, Controls & Indicators
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
1 NET PWR INPUT
(A/B/C) (3) 3-pin 3.5 mm detachable
terminal blocks
Cresnet power selection
connectors for each segment
Connect to external Cresnet
power supplies, or to “host”
power source via jumpers, to
power devices connected to the
NET A/B/C ports
Max Wire Size:
1.5 mm2(16 AWG)
Maximum Load per Segment:
75 Watts
(3.13 Amps @ 24 Volts DC)
2 NET HOST and LEDs
(2) 4-pin 3.5 mm detachable
terminal blocks, paralleled
Connects to Master NET port of
DIN-AP2 or other control
system, and loops through to
additional DIN Rail Cresnet
devices
Max Wire Size:
1.5 mm2(16 AWG)
Pin 1 (24): Power (24 VDC)
Pin 2 (Y): Data
Pin 3 (Z): Data
Pin 4 (G): Ground
(1) Green LED indicates
Cresnet power is supplied to
unit via either NET HOST port
(Continued on following page)
6 •DIN Rail Cresnet Hub: DIN-HUB Operations & Installation Guide – DOC. 6671A
Tabla de contenidos
Otros manuales de Cambiar de Crestron
Crestron
Crestron GreenLight DIN-8SW8 Instrucciones de funcionamiento originales
Crestron
Crestron DigitalMedia DM-MD64X64 Manual de usuario
Crestron
Crestron CLCI-1SW2EX-W Manual de usuario
Crestron
Crestron C2N-MMS Manual de usuario
Crestron
Crestron 8x8 DigitalMedia DM-MD8X8 Manual de usuario
Crestron
Crestron DIN-HUB Manual de usuario
Crestron
Crestron CEN-SWPOE-16 Manual de usuario
Crestron
Crestron CLW-SLVS Manual de usuario
Crestron
Crestron DM Lite HD-RX-4K-510-C-E Manual de usuario
Crestron
Crestron DM NVX Series Guía
Crestron
Crestron DigitalMedia XiO Director DM-XIO-DIR-160 Dibujo dimensional
Crestron
Crestron CNLGE-8 Manual de usuario
Crestron
Crestron CEN-SWPOE-24 Manual de usuario
Crestron
Crestron DigitalMedia DM-MD8X8-CPU3 Manual de usuario
Crestron
Crestron DigitalMedia DM-MD64X64 Manual de usuario
Crestron
Crestron HD-MD6X2-4K-E Dibujo dimensional
Crestron
Crestron DigitalMedia DMC-CATO-HD Manual de usuario
Crestron
Crestron 8x8 DigitalMedia DM-MD8X8 Manual de usuario
Crestron
Crestron DigitalMedia DM-MD8X8-CPU3 Manual de usuario
Crestron
Crestron CLW-DIM1 Manual de usuario
