Crestron ULTIMATE IC6-AW-W-T-EACH Manual de usuario
The Crestron® Ultimate speaker ULTIMATE IC6-AW-W-T-EACH made
by Origin Acoustics delivers the pinnacle of performance for demanding
residential installations. Select materials, top shelf components and a
high-end appearance underscore the design behind each model. The
result is a complete line of in-ceiling speakers suitable for installation in
luxury residential applications, restaurants, retail spaces, universities,
and office buildings.
In the Box
1ULTIMATE IC6-AW-W-T-EACH
Additional Items
1 Bayonet Ring
1 Cutout Template
1 Grille
Installation
Prepare the Mounting Hole
Before finalizing the speaker location, check to make sure there are no
fixtures, pipes, air ducts, joists, or other possible obstructions. If
applicable, use a good quality stud finder to locate joists. If there are no
obstructions, use the supplied template to trace an outline of the
mounting hole.
To identify obstructions, do the following:
lUse a drywall saw to cut a small hole at a 45° angle. An angle cut
simplifies repair since the removed piece can be reinserted to help
plug the hole.
lUse a piece of stiff wire, bent into an L shape, with one end long
enough to explore an area equal to the size of the speaker. Insert the
wire into the hole, make sure it rotates freely in a complete circle and
that there is sufficient depth.
If there are no obstructions, use the supplied template to trace outlines
of the mounting hole on the ceiling. Cut the final mounting hole at a 90°
angle to the ceiling.
ULTIMATE IC6-AW-W-T-EACH QuickStart
Ultimate 6.5 in. 2-Way All Weather In-Ceiling Speaker, White Textured, Single
1
Paint the Speaker Grille
Painting the speaker grille should be done prior to mounting.
1. Carefully remove the thin cloth on the underside of the grille, and set
it aside for re-installation.
2. Lightly spray paint the front of the grille from a distance. Be careful
not to plug any of the holes.
3. Once the paint is dry, put the cloth back on the underside of the grille.
Install the Bayonet Ring
The bayonet ring features a metal lock to ensure the correct installation
of the loudspeaker. Out of the box, the lock will be in its closed position.
1. Open the lock tab to its unlocked position to remove the speaker
from the ring.
2. Push the metal release tabs on the inside of the rails and pull the clips
to the top of the rails.
NOTE: Out of the box, the clips are positioned at top of rails.
3. Insert the bayonet ring into the hole in the ceiling by gently bending
the rails inward.
NOTES:
lEnsure the bayonet ring rails are properly bent and inserted into
the ceiling hole to avoid damaging the bayonet ring rails.
lThe length of the bayonet ring rails can be adjusted by breaking
them off to match the depth of the mounting hole. Ensure the
clips are tightened before you do so.
4. Reach inside the bayonet ring and pull the clips down so that the
bayonet ring is firmly in place, but not too tight. If the bayonet ring
needs to be removed, reach inside and push the release tabs to reset
the clips and the bayonet ring can now be taken out.
2
ULTIMATE IC6-AW-W-T-EACH QuickStart
Ultimate 6.5 in. 2-Way All Weather In-Ceiling Speaker, White Textured, Single
Install the Speaker Cable
Run the speaker cable (not included) from the audio source to the
speaker location, observing all appropriate local codes. Strip the ends of
the speaker cable approximately 0.25 in. to 0.50 in. (~6 mm to ~12 mm)
and twist the strands.
Connect the Speaker Cable
Connect the speaker cable (not included) to the spring terminals by
pressing the top of the terminals down and inserting the exposed
strands into the hole. Make sure that the positive wire is attached to the
red connection, and the negative wire is attached to the black
connection.
Mount/Remove the Speaker
1. Fit the speaker into the bayonet ring. Then twist the speaker about 15
degrees clockwise into place. When the speaker is properly seated,
the indicators on the ring and the speaker line up.
NOTE: The indicators must line up to ensure the speaker is properly
seated. The speaker must be properly seated, or the metal lock tab
will not lock.
3
ULTIMATE IC6-AW-W-T-EACH QuickStart
Ultimate 6.5 in. 2-Way All Weather In-Ceiling Speaker, White Textured, Single
2. Push the metal lock tab to its locked (closed) position (see Figure A).
4
ULTIMATE IC6-AW-W-T-EACH QuickStart
Ultimate 6.5 in. 2-Way All Weather In-Ceiling Speaker, White Textured, Single
3. To uninstall the speaker, pull the metal lock tab to its unlocked (open)
position (see Figure B) and twist the speaker counterclockwise.
5
ULTIMATE IC6-AW-W-T-EACH QuickStart
Ultimate 6.5 in. 2-Way All Weather In-Ceiling Speaker, White Textured, Single
Visit the Product Page
Scan the QR code to visit the product page.
ULTIMATE IC6-AW-W-T-EACH
`
https://www.crestron.com/model/6511844
Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Regulatory Model: M202046006
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron and the Crestron logo are either trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and/or other countries. Origin Acoustics is
either a trademark or registered trademark of Origin Acoustics, Inc. in the United States
and/or other countries. Other trademarks, registered trademarks, and trade names may
be used in this document to refer to either the entities claiming the marks and names or
their products. Crestron disclaims any proprietary interest in the marks and names of
others. Crestron is not responsible for errors in typography or photography.
©2021 Crestron Electronics, Inc.
Doc. 9035A
06/30/21
6
ULTIMATE IC6-AW-W-T-EACH QuickStart
Ultimate 6.5 in. 2-Way All Weather In-Ceiling Speaker, White Textured, Single
Tabla de contenidos
Otros manuales de Oradores de Crestron
Crestron
Crestron SAROS ICI4T Dibujo dimensional
Crestron
Crestron SAROS IC6LPT Manual de usuario
Crestron
Crestron SPK-6L Manual de usuario
Crestron
Crestron SAROS IC4T Manual de usuario
Crestron
Crestron ULTIMATE IC6-W-T-EACH Manual de usuario
Crestron
Crestron Aspire IW5 Manual de usuario
Crestron
Crestron Excite IC6DT Manual de usuario
Crestron
Crestron Ultimate IC3-AW-SA-BOX-WOOFER-W-T-EACH Manual de usuario
Crestron
Crestron Air Series Manual de usuario
Crestron
Crestron Ultimate IWLCR62-W-T-EACH Manual de usuario
Crestron
Crestron Aspire IC8DT Manual de usuario
Crestron
Crestron FS6-B Manual de usuario
Crestron
Crestron Excite IC5 Manual de usuario
Crestron
Crestron Aspire IC5 Manual de usuario
Crestron
Crestron SAROS PD4T Manual de usuario
Crestron
Crestron UC-SB1 Manual de usuario
Crestron
Crestron FSDI8-W-T Manual de usuario
Crestron
Crestron ASPIRE_IWLCR52 Dibujo dimensional
Crestron
Crestron ESSENCE IC5 Manual de usuario
Crestron
Crestron SPKA-BC-IC6 Manual de usuario
