Crestron DM-RMC-4K-100-C-1G Manual de usuario
The Crestron® DM-RMC-4K-100-C-1G is a DigitalMedia 8G+® wall plate
receiver and room controller that provides a simple, cost-effective
interface solution for a single display device as part of a complete
Crestron® DigitalMedia™ system.
In the Box
1 DM-RMC-4K-100-C-1G Wall Plate DigitalMedia 8G+®
Receiver and Room Controller 100
Additional Items
1 Bracket, Surface Mount (2016054)
2 Connector, 2-Pin (2003574)
1 Connector, 3-Pin (2003575)
2 Screw, 6-32 x 1/4 in., Pan Head, SEMS (2007218)
2 Screw, 6-32 x 3/4 in., Truss Head, Combo (2009211)
Install the Receiver
Mount the device into an electrical box, onto a flat surface, or onto a rack
rail. Connect the rear of the receiver before mounting it into an electrical
box. If the receiver is to be mounted onto a flat surface or rack rail,
connect the rear of the unit after it is mounted.
Connecting the Rear of the Receiver
NOTE: The DM IN port is a PoDM (Power over DM) powered device
(PD) port and is also compatible with HDBaseT® PoE:
lIn order for the DM IN port to receive PoDM, the port must be
connected to a DigitalMedia switcher or other DigitalMedia
equipment that has a PoDM power sourcing equipment (PSE) port.
lIn order for the DM IN port to receive HDBaseT PoE, the port must
be connected to equipment that has an HDBaseT PoE PSE port.
Wiring that connects to a PoDM or HDBaseT PoE port is designed for
intrabuilding use only.
PoDM, HDBaseT PoE, or the optional PW-2407WUL power pack (sold
separately) can be used to power the receiver.
1
DM-RMC-4K-100-C-1G QuickStart
Wall Plate 4K DigitalMedia 8G+® Receiver and Room Controller 100
Connections to Rear of Receiver
Refer to the following table for DM IN wiring information.
DM IN Wiring
Pin Number Wire Color
1 Orange/White
2 Orange
3 Green/White
4 Blue
5 Blue/White
6 Green
7 Brown/White
8 Brown
Mounting into an Electrical Box
Mount the receiver into a 1-gang electrical box (not included).
1. Using a Phillips screwdriver and the two included 6-32 x 3/4-inch truss
combo head screws, attach the receiver to the electrical box.
2. Attach a decorator style faceplate (not included) to the receiver using
two screws (not included).
NOTE: The optional Crestron FP-G1 Series faceplate assembly is
sold separately.
Mounting into an Electrical Box
2
DM-RMC-4K-100-C-1G QuickStart
Wall Plate 4K DigitalMedia 8G+® Receiver and Room Controller 100
Mounting onto a Flat Surface
Mount the receiver onto a suitable flat surface such as the underside of a
table.
1. Using a Phillips screwdriver and the two included 6-32 x 1/4-inch
SEMS screws, attach the included surface-mount bracket to the
receiver.
2. Attach the bracket to the flat surface using the two surface-mount
screw slots and two mounting screws (not included).
Mounting onto a Flat Surface
Mounting onto a Rack Rail
Mount the transmitter onto the front or rear rail of a rack.
1. Position the receiver horizontally so that the holes in the left or right
mounting flange align with the holes in the rack rail.
2. Secure the unit to the rack rail using two mounting screws
(notincluded).
Mounting onto a Rack Rail
3
DM-RMC-4K-100-C-1G QuickStart
Wall Plate 4K DigitalMedia 8G+® Receiver and Room Controller 100
Connecting the Front of the Receiver
Connect the front of the receiver as required for the application.
NOTES:
lThe IR OUT and COM (RS-232) ports are enabled only when the
receiver is connected to an Ethernet-enabled DigitalMedia switcher
or transmitter that is addressable from a Crestron control system.
lPass-through mode for CEC is supported when the DM-RMC-4K-
100-C-1G is connected directly to a DigitalMedia transmitter.
Fullmanagement of CEC is supported between the locally
connected HDMI® device and a control system when connected to
an Ethernet-enabled 4K DigitalMedia transmitter or switcher that
supports CEC over the HDBaseT connection.
Connections to Front of Receiver
Visit the Product Page
Scan the QR code to visit the product page.
DM-RMC-4K-100-C-1G-B
www.crestron.com/model/6505627
DM-RMC-4K-100-C-1G-W
www.crestron.com/model/6505628
4
DM-RMC-4K-100-C-1G QuickStart
Wall Plate 4K DigitalMedia 8G+® Receiver and Room Controller 100
Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G+, and DM 8G+ are either
trademarks or registered trademarks of Crestron Electronics, Inc. in the United States
and/or other countries. HDBaseT and the HDBaseT Alliance logo are either trademarks
or registered trademarks of the HDBaseT Alliance in the United States and/or other
countries. HDMI and the HDMI logo are either trademarks or registered trademarks of
HDMI Licensing LLC in the United States and/or other countries. Other trademarks,
registered trademarks, and trade names may be used in this document to refer to
either the entities claiming the marks and names or their products. Crestron disclaims
any proprietary interest in the marks and names of others. Crestron is not responsible
for errors in typography or photography.
©2020 Crestron Electronics, Inc.
Doc. 7707F
04/22/20
5
DM-RMC-4K-100-C-1G QuickStart
Wall Plate 4K DigitalMedia 8G+® Receiver and Room Controller 100
Otros manuales de Controladores de Crestron
Crestron
Crestron DM-RMC-4K-SCALER-C Manual de usuario
Crestron
Crestron DigitalMedia DM-RMC-100-1 Cómo utilizar
Crestron
Crestron MPC-M10 Instrucciones de instalación y funcionamiento
Crestron
Crestron IPAC Manual de usuario
Crestron
Crestron 302 Manual de usuario
Crestron
Crestron MC2E Manual
Crestron
Crestron 3 Series Dibujo dimensional
Crestron
Crestron PC-350V Series Manual de usuario
Crestron
Crestron 3 Series Manual de usuario
Crestron
Crestron PC-350V-12 Manual de usuario
Crestron
Crestron MPC-M5 Dibujo dimensional
Crestron
Crestron 4 Series Manual de usuario
Crestron
Crestron ZUMMESH-JBOX-20A-SW Manual de usuario
Crestron
Crestron MC2W Manual de usuario
Crestron
Crestron SP-SC Manual de usuario
Crestron
Crestron DigitalMedia Room Controller DM-RMC-100 Cómo utilizar
Crestron
Crestron CNECI-4A Manual de usuario
Crestron
Crestron HD-CTL-101 Manual de usuario
Crestron
Crestron C2N-SSC-2 Cómo utilizar
Crestron
Crestron 4K DigitalMedia 3-Series Manual de usuario
