Crestron UC-M50-Z Manual de usuario
The UC-M50-Z Crestron Flex tabletop conferencing system provides a
medium room video conference solution for use with Zoom Rooms®
software. It supports up to three video displays and features a Crestron
Flex tabletop conference device, UC bracket assembly, and an
collaboration camera.
Minimum Requirements:
lA video display (not included) connected to the UC Engine. A second
display is optional.
lA Zoom Rooms account or activation code (not included).
In the Box
Tabletop Conference Device
1 Tabletop Conference Device, Zoom Rooms Software
(6508227)
1 Cable, CAT5e, RJ-45 - RJ-45, 12 ft (3.7 m) (2033988)
1 Cable Retention Plate (2047908)
3 Tie Wrap (2047935)
UC Bracket Assembly
1 UC Bracket Assembly with UC Engine and HDMI® content
ingest (UC-BRKT-200-S-Z-ASSY, 6512690)
2 Anchor, Drywall, Plastic, 3/8 in. x 1/2 in. (9.5mm x
12.7mm) (2052565)
1 Key, Anchor (4529654)
2 Screw, 8-AB x 1-1/2 in. (38.1 mm), Pan Head, Combo
(2052567)
4 Tie Wrap (2047935)
Additional Items
1 Collaboration camera (6510482)
1 Camera wall mount kit (6510998)
1 Cable, CAT5e, RJ-45 - RJ-45, 7 ft (2.1 m) (6509924)
1 Cable, DisplayPort™ to HDMI, 6 ft (1.8 m) (6508282)
1 Cable, HDMI, 20 ft (6.1 m) (6503567)
1 Cable, HDMI, 6 ft (1.8 m) (6503565)
1 Cable, USB 2.0, A - Micro-B, 6 ft (1.8 m) (6510947)
1 Cable, USB 3.0, Right angle USB-C® to A, 6 ft (1.8 m)
(6511591)
1 Cable, USB Extension, USB Type A Male-to-Female, 15 ft
(4.6m) (6508260)
1 Power supply (6500187)
1
UC-M50-Z QuickStart
Crestron Flex Tabletop Medium Room Video Conference System for Zoom Rooms® Software
Mount Devices
Mount the UC Bracket Assembly
Mount the UC Bracket Assembly to VESA® compliant display devices, a
wall, or other building structure. Anchors and screws are supplied for
installation on walls with 3/8 in. (9.5mm) to 3/4 in. (19mm) thickness.
CAUTION: Preinstalled screws may protrude from the back of the
UC Bracket Assembly. Exercise caution when handling the UC
Bracket Assembly to avoid scratching or damaging surfaces.
NOTE: The integrated cable tie wraps are reusable. Avoid damaging
the cable tie wraps.
Mount the Camera
Mount the included camera according to the UC-CAM-WMK Quick Start
(Doc. 8257).
Install the Cable Retention Plate
The included cable retention plate provides tie-down points for cables
that connect to the Crestron® conference device.
Remove the adhesive backing from the cable retention plate and install
the plate on the underside of the conference device as shown in the
following diagram. Ensure the cable retention plate is firmly attached
before securing cables.
CAUTION: When turning over the device, place the device on a soft
surface to avoid damage.
NOTE: If a swivel mount kit (CCS-UCA-SMK) is to be used, use the
cable retention bracket included with the swivel mount kit as
described in the CCS-UCA-SMK DO Guide (Doc. 7882).
2
UC-M50-Z QuickStart
Crestron Flex Tabletop Medium Room Video Conference System for Zoom Rooms® Software
Connect
Identify the UC Bracket Assembly
The UC Bracket Assembly is available in two models. Identify the model included with your Crestron Flex system. Tap or click the corresponding
image below to navigate to the appropriate connection instructions.
UC Bracket Assembly with HD-CONV-USB-200 UC Bracket Assembly with HD-CONV-USB-300
3
UC-M50-Z QuickStart
Crestron Flex Tabletop Medium Room Video Conference System for Zoom Rooms® Software
Make Connections
NOTE: For reference, the UC Bracket Assembly is shown with the HD-CONV-USB-200 in the following connection diagrams. Unless otherwise
indicated in this guide, the connections remain the same for the UC Bracket Assembly with HD-CONV-USB-200 and HD-CONV-USB-300.
1. Make UC Engine connections as shown in the following illustration.
6
UC-M50-Z QuickStart
Crestron Flex Tabletop Medium Room Video Conference System for Zoom Rooms® Software
2. Connect displays to the UC Engine.
7
UC-M50-Z QuickStart
Crestron Flex Tabletop Medium Room Video Conference System for Zoom Rooms® Software
3. Connect the camera to the UC Engine as shown in the image below. Do not connect the camera to any of the other USB ports.
8
UC-M50-Z QuickStart
Crestron Flex Tabletop Medium Room Video Conference System for Zoom Rooms® Software
4. Connect a laptop to the HD-CONV-USB-200 or HD-CONV-USB-300.
5. Bundle the cables to the bracket assembly with the integrated cable tie wraps. The cable tie wraps are reusable.
9
UC-M50-Z QuickStart
Crestron Flex Tabletop Medium Room Video Conference System for Zoom Rooms® Software
Bundle Cables
Bundle the cables together and use a provided tie wrap to secure the
bundle to one of the positions on the cable retention plate at the rear of
the device. Avoid bundling power and data cables together.
Configure
Apply Power
Press the power button on the bottom of the UC Engine and apply
power to all of the other devices in the system.
Configure the Conference Device
To configure the conference device to operate in Zoom Rooms Video
mode:
1. On a computer, enter the IP address displayed on the conference
device into a web browser.
NOTES:
lThe device and computer must be on the same network switch
and VLAN.
lA login with administrative rights for the device is required.
2. Enter the following information in the appropriate fields:
lUC-Engine Address: Enter the IP address or hostname of the UC
Engine.
NOTE: The hostname is printed on a label affixed to the UC
Engine.
lUC-Engine Port: By default, port number 49500 is used. If a
different port number has been configured on the UC Engine,
enter that port number instead.
lUC-Engine Admin Username: Enter the username for the UC
Engine. The default username is “admin”.
lUC-Engine Admin Password: Enter the login password for the UC
Engine. The default password is “crestron”.
3. Select Save Changes.
10
UC-M50-Z QuickStart
Crestron Flex Tabletop Medium Room Video Conference System for Zoom Rooms® Software
Otros manuales para UC-M50-Z
1
Tabla de contenidos
Otros manuales de Sistema de conferencias de Crestron
Crestron
Crestron UC-MX70-NC-Z Manual de usuario
Crestron
Crestron UC-B160-Z Manual de usuario
Crestron
Crestron UC-BX31-Z-WM Manual de usuario
Crestron
Crestron UC-CX100-Z-WM Manual de usuario
Crestron
Crestron CCS-UC-1-T-V Manual de usuario
Crestron
Crestron FlipTop FT2 Series Manual de usuario
Crestron
Crestron UC-MX150-T Manual de usuario
Crestron
Crestron UC-B140-Z Manual de usuario
Crestron
Crestron UC-MMX30-T-I Manual de usuario
Crestron
Crestron UC-BX30-Z Manual de usuario
Crestron
Crestron UC-C160-Z Manual de usuario
Crestron
Crestron Mercury CCS-UC-1 Dibujo dimensional
Crestron
Crestron UC-MX50-Z Manual de usuario
Crestron
Crestron UC-CX100-T Manual de usuario
Crestron
Crestron UC-M50-Z-UPGRD Manual de usuario
Crestron
Crestron UC-2-Z Manual de usuario
Crestron
Crestron Flex UC-MX70-U Manual de usuario
Crestron
Crestron UC-BX31-T Manual de usuario
Crestron
Crestron UC-M50-T-UPGRD Manual de usuario
Crestron
Crestron UC-B31-T Manual de usuario
Manuales populares de Sistema de conferencias de otras marcas
Kramer
Kramer VIA GO Manual de usuario
AVT
AVT MAGIC AC1 Go Manual de usuario
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Manual de usuario
Sony
Sony PCS-I150 Manual de usuario
Middle Atlantic Products
Middle Atlantic Products VTC Series Manual de usuario
Prentke Romich Company
Prentke Romich Company Vanguard Plus Guía
