Crestron ST-CS Manual de usuario

Crestron ST-CS

Current Sensor Module

Operations Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

All brand names, product names and trademarks are the property of their respective owners.

Crestron ST-CS Current Sensor Module

Contents

Current Sensor Module: ST-CS 1

Introduction ...............................................................................................................................1

Features and Functions................................................................................................1

Specifications ..............................................................................................................2

Physical Description....................................................................................................3

Setup ..........................................................................................................................................7

Identity Code ............................................................................................................... 7

Hardware Hookup .......................................................................................................8

Threshold Adjustment ...............................................................................................10

Programming Software............................................................................................................10

Earliest Version Software Requirements for the PC .................................................11

Programming with SIMPL Windows........................................................................ 11

Uploading ................................................................................................................................14

Communication Settings ........................................................................................... 14

Uploading a SIMPL Windows Program ...................................................................16

Problem Solving ......................................................................................................................17

Troubleshooting ........................................................................................................17

Further Inquiries........................................................................................................18

Future Updates ..........................................................................................................18

Return and Warranty Policies.................................................................................................. 19

Merchandise Returns / Repair Service ......................................................................19

CRESTRON Limited Warranty ................................................................................19

Operations Guide – DOC. 5677A Contents •i

Crestron ST-CS Current Sensor Module

Current Sensor Module: ST-CS

Introduction

Features and Functions

There are two Crestron®Current Sensor Module configurations available: ST-CS

and STI-CS. Configuration is based on the type of power availability. Use the ST-CS

with a 120V power supply for 120 VAC devices, and the STI-CS with a 220V

power supply for 220 VAC devices. For purposes of this Operations Guide, the term

ST-CS is used for either configuration, except where noted.

The ST-CS measures the average current of each half cycle of an AC load. The

current sensing circuitry is highly sensitive with a wide range of adjustment. The

high sensitivity makes the ST-CS ideally suited for use with low power units as

VCRs, TV tuners, and satellite receivers. The wide range makes the ST-CS ideally

suited for medium and high-powered units such as TV sets, video projectors, and

power amplifiers up to 10 A total load (6 A for STI-CS).

When the ST-CS electronic circuit senses that the average current drawn by a

monitored unit exceeds the FULL LOAD preset threshold, the full load LED

(labeled FULL) illuminates. The ST-CS sends a signal to the control system

indicating the current ST-CS status.

Secondary circuitry senses and determines whether the average current is less than

the FULL LOAD preset, but more than no load. This PARTIAL LOAD threshold is

also adjustable. The FULL LOAD and PARTIAL LOAD circuitry is mutually

exclusive; only one definite status is communicated to the control system. The FULL

and PARTIAL LEDs are illuminated one at a time.

Threshold adjustments are accomplished by use of a 15-turn precision potentiometer

(POT). The POT permits highly accurate and repeatable current threshold settings.

Functional Summary

• Ideally suited for use with large TVs (minimum load specification

0.033A, 4W).

• The wide range makes the ST-CS ideally suited for medium and high-

powered units such as TV sets, video projectors, and power amplifiers.

• Rack mountable with optional ST-RMK (1 space height).

Operations Guide – DOC. 5677A Current Sensor Module: ST-CS •1

Current Sensor Module Crestron ST-CS

Specifications

The following table provides a summary of specifications for the ST-CS module.

ST-CS Specifications

SPECIFICATION DETAILS

Power Requirements 3 Watts (.25A @ 24VDC) - Cresnet

or 0.5A @ 12 VDC external power supply

(PW-1205 supplied with ST-CS, PWI-1210

supplied with STI-CS)

Default Net ID 18

Control System Update Files 1, 2, 3

2-Series Control System Version C2-2.000.CUZ or later

CEN/CN-TVAV

CNMSX-AV/Pro

Version 5.10.13V.UPZ or later

Version 5.01.35X.UPZ or later

CNRACKX/-DP Version 5.01.35W.UPZ or later

ST-CP Version 4.02.04S.UPZ or later

Maximum AC Load 10 A, 1 KW @ 120 VAC (ST-CS)

6 A, 1 KW @ 220 VAC (STI-CS)

Minimum AC Load 0.033 A, 4 W @ 120 VAC

Voltage Range 0 to 220 VAC, 45 to 65 Hz

Ports/Connectors

NET

POWER A

Two 6-pin, RJ type connectors

One 3-pin AC connector (ST-CS)

One 3 conductor, six-foot cable (STI-CS)

POWER B One 3-pin AC connector (ST-CS)

One 3 conductor, six-foot cable (STI-CS)

12 VDC, 0.5A One – Male receptacle for external power pack

POWER IN One 3-conductor cable

Rack Space 1 unit high, ½ unit wide

Environmental Temperature 41° to 113°F (5° to 45°C)

Environmental Humidity 10% to 90% RH (non-condensing)

Dimensions & Weight Height:

Width:

Depth:

Weight:

1.70 in (4.318 cm)

7.07 in (17.95 cm)

6.32 in (16.06 cm)

2.72 lb (1.23 kg) ST-CS

2.96 lb (1.34 kg) STI-CS

1. The latest software versions can be obtained from the Downloads | Software Updates section of the

Crestron website (www.crestron.com). Refer to the note below.

2. Crestron 2-Series control systems include the AV2, CP2/CP2E, MP2/MP2E, PAC2, PRO2, QM-

RMC, QM-RMCRX and RACK2.

3. Filenames for CNX and ST-CP update files have a UPZ extension. Files on the website may be .zip

or self-extracting .exe files containing the .cuz or .upz file. To avoid program problems, make sure

you are using the update file with the correct suffix letter (e.g., S, V, W, X).

NOTE: Crestron software and any files on the website are for Authorized Crestron

dealers and Crestron Authorized Independent Programmers (CAIP) only. New users

may be required to register to obtain access to certain areas of the site (including the

FTP site).

2 •Current Sensor Module: ST-CS Operations Guide - DOC. 5677A

Crestron ST-CS Current Sensor Module

Physical Description

The ST-CS is housed in a black enclosure with labels on the front and rear panels.

On the front of the unit there are six LEDs for indicating current status, power, and

Cresnet activity. The front panel provides four potentiometers (POTs) for adjusting

the current sensing sensitivity. All connections are made on the back of the unit. The

proper domestic and international power cords and plugs are used on the ST-CS and

STI-CS, respectively. Refer to the physical views shown below. There are four

rubber feet on the base of the unit for stability and to prevent slippage.

ST-CS Front and Back Views (120 VAC Version)

Operations Guide – DOC. 5677A Current Sensor Module: ST-CS •3

Current Sensor Module Crestron ST-CS

ST-CS Physical Views (120 VAC Version)

6.94 in

(17.63 cm)

1.50 in

(3.81 cm)

CRESTRON ELECTRONICS INC. CRESSKILL N.J. 07626

NET

12VDC

.5A

NET POWER A POWER B

50-60HZ

COMBINED

OUTPUT

10A MAX

90-125VAC

POWER IN

6.13 in

(15.58 cm)

6.32 in

(16.06 cm)

NETPWR

CRESTRON

CURRENT SENSOR

ST-CS

FULL PARTIALPARTIAL

POWER A POWER B

FULL

1.78 in

(4.53 cm)

7.07 in

(17.95 cm)

4 •Current Sensor Module: ST-CS Operations Guide - DOC. 5677A

Crestron ST-CS Current Sensor Module

STI-CS Physical Views (220 VAC Version)

PWR

CURRENT SENSOR

CRESTRON ELECTRONICS INC. CRESSKILL N.J. 07626

.5A

12VDC

1.70 in

(4.32 cm)

1.50 in

(3.81 cm)

CRESTRON

STI-CS

POWER B

NET FULL PARTIAL

POWER A

FULL

6.94 in

(17.63 cm)

7.07 in

(17.95 cm)

PARTIAL

POWER A POWER B

NET NET

OUTPUT

6A MAX

COMBINED

50-60HZ

POWER IN

90-220 VAC

6.13 in

(15.58 cm)

6.32 in

(16.06 cm)

Ports

A number of ports and plugs are provided on the back of the ST-CS. Each has a silk-

screened label. Refer to the following illustrations and descriptions.

ST-CS Ports and Plugs

CRESTRON ELECTRONICS INC. CRESSKILL N.J. 07626

NET

12VDC

.5A

NET POWER A POWER B

50-60HZ

COMBINED

OUTPUT

10A MAX

90-125VAC

POWER IN

Operations Guide – DOC. 5677A Current Sensor Module: ST-CS •5

Current Sensor Module Crestron ST-CS

STI-CS Ports and Plugs

CRESTRON ELECTRONICS INC. CRESSKILL N.J. 07626

.5A

12VDC POWER A POWER B

NET NET

OUTPUT

6A MAX

COMBINED

50-60HZ

POWER IN

90-220 VAC

12 VDC .5 A

This DC power socket connector is used to supply external power via the supplied

500 mA power pack (1000 mA power pack for STI-CS). The supplied power pack is

optional when the ST-CS receives network power.

NET

These two 6-pin, RJ-12 modular jacks are used to connect the ST-CS module to a

control system. When the module is part of the Cresnet®system, power may be

supplied via NET if within system power and cable length limits; the supplied power

pack is optional and need not be attached. Two NET ports are available so that

network units can be daisy-chained together. Review the latest revision of the

Network Modular Cable Requirements (Doc. 5682).

NET Connectors

PIN SIGNAL

1 +24

2 +24

3 Y

4 Z

5 GND

1 2 3 4 5 6 1 2 3 4 5 6

6 GND

NOTE: Most 4-conductor phone cables are wired in a crisscross fashion and are not

compatible with Crestron equipment.

If the power pack is attached when the module is part of a Cresnet system, power is

drawn from the power pack (the module does not draw from the network power).

POWER A and POWER B

For the ST-CS, two three-prong socket connectors are provided to connect to any

device that requires current sensing.

For the STI-CS, two international power cords (approximately six feet in length) are

available for connection to an international power socket.

POWER IN

For the ST-CS, a three-prong plug is used to connect to a three-prong outlet that

supplies power. For the STI-CS, an international power cord (approximately six feet

in length) is available for connection to an international power plug.

6 •Current Sensor Module: ST-CS Operations Guide - DOC. 5677A

Tabla de contenidos

Otros manuales de Accesorios de Crestron

Crestron

Crestron CNXRMCS Manual de usuario

Crestron

Crestron 1700C-BEZEL Cómo utilizar

Crestron

Crestron GLS-ODT-C-CN Manual de usuario

Crestron

Crestron GLS-OIR-C-450 Cómo utilizar

Crestron

Crestron 1700C-BTNB-BEZEL Cómo utilizar

Crestron

Crestron Dual-Technology Wall Mounted Occupancy Sensor... Cómo utilizar

Crestron

Crestron GLS-OIR-CSM-EX-BATT Manual de usuario

Crestron

Crestron AirBoard CCS-WB-1 Dibujo dimensional

Crestron

Crestron CT/LC-FPAR1000 Manual de usuario

Crestron

Crestron AirBoard CCS-WB-1 Manual del propietario

Crestron

Crestron FT2A-PWR-IT Series Manual de usuario

Crestron

Crestron FT2A-PWR-US-2-BX Manual de usuario

Crestron

Crestron GLS-LCL Instrucciones de funcionamiento

Crestron

Crestron CEN-IDOC Manual de usuario

Crestron

Crestron AAE Manual de usuario

Crestron

Crestron GLS-ODT-C-2000 Cómo utilizar

Crestron

Crestron CT/LC-WPK Manual de usuario

Crestron

Crestron (Wattstopper P/N LS-290C) Photocell Light Sensor... Cómo utilizar

Crestron

Crestron C2N-RTHS Manual de usuario

Crestron

Crestron 1700C-BTNB-BEZELS Cómo utilizar

Crestron

Crestron IRP2 Manual de usuario

Crestron

Crestron Zum ZUMMESH-PIR-OCCUPANCY-BATT Manual de usuario

Crestron

Crestron Isys TPS-2000L Manual de usuario

Crestron

Crestron B-G1-WPK Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario