Crestron CNXRMCS Manual de usuario
Crestron CNXRMCS
Current Sensor for Room Solution Boxes
Operations Guide
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2003 Crestron Electronics, Inc.
Crestron CNXRMCS Current Sensor for Room Solution Boxes
Contents
Current Sensor for Room Solution Boxes: CNXRMCS 1
Introduction....................................................................................................................1
Specifications.....................................................................................................1
Physical Description ..........................................................................................2
Setup ..............................................................................................................................3
Connector Wiring...............................................................................................3
Connection .........................................................................................................3
Programming......................................................................................................4
Problem Solving.............................................................................................................5
Troubleshooting .................................................................................................5
Future Updates...................................................................................................6
Return and Warranty Policies ........................................................................................7
Merchandise Returns / Repair Service...............................................................7
CRESTRON Limited Warranty.........................................................................7
Operations Guide – DOC. 8175A Contents •i
Crestron CNXRMCS Current Sensor for Room Solution Boxes
Current Sensor for Room
Solution Boxes: CNXRMCS
Introduction
The Current Sensor for Room Solution Boxes, CNXRMCS, senses the
current from a television (9” color or larger) or other high current
electronic devices. Since most infrared (IR) remotes send the same IR
signal to turn a device ON or OFF (no discrete on and off power
commands), the CNXRMCS lets the control system know whether a
device is ON or OFF by indicating a high (ON, which indicates high
current draw) or low (OFF, which indicates low or no current draw)
digital signal to a Room Solution Box, such as the CNXRMC,
CNXRMCLV, or to an I/O port on any control processor.
NOTE: The CNXRMCS is not designed for use with low power devices
such as a VCR, DVD, DSS, etc.
Functional Summary
• Senses current draw from 9 inch or larger televisions
• 2-pin connector interface to Room Solution Boxes
• 6-foot cord included
Specifications
The following table provides a summary of specifications.
Specifications of the CNXRMCS
SPECIFICATION DETAILS
Maximum AC Load 1 KW (10A @ 120VAC)
Minimum Trigger
Current
Typically, 1A resistive load (non-adjustable).
Threshold is lower for normal loads such as a
television.
Specifications continued on the next page.
Operations Guide – DOC. 8175A Current Sensor for Room Solution Boxes: CNXRMCS •1
Current Sensor for Room Solution Boxes Crestron CNXRMCS
Specifications of the CNXRMCS - continued
SPECIFICATION DETAILS
Dimensions &
Weight
Height: 3.10 in (7.87 cm)
Width: 2.10 in (5.33 cm)
Depth: 2.34 in (5.94 cm)
Cord Length: Approximately 6 ft (1.83 m)
Weight: 1.60 oz (0.20 kg)
Physical Description
Refer to the physical views in the following illustration. The CNXRMCS
contains an AC plug on one side and an AC outlet on the other. The cord
to the 2-pin connector is approximately six feet long and is polarized with
the solid black wire for ground and the striped wire as the signal wire.
The connector attaches to the SENS port of a Room Solution Box.
CNXRMCS Physical Views
2 •Current Sensor for Room Solution Boxes: CNXRMCS Operations Guide – DOC. 8175A
Crestron CNXRMCS Current Sensor for Room Solution Boxes
Setup
Connector Wiring
Insert the 2-pin connector in the current sensor connection (labeled
“SENS”) on a Room Solution Box. The solid black wire of the digital
connector cord must be attached to pin 2 (G or ground pin) of the
connector and the striped wire must be attached to pin 1 (signal).
Plug the CNXRMCS in an AC outlet and the high current device in the
CNXRMCS. Refer to the following illustrations.
CNXRMCS Connector Wiring
1
2
Solid Black wire
connected
to pin 2 (ground)
Striped wire
connected
to pin 1 (signal)
G
SENS
C
RS-232
IR
TC SER ELENOR
IN
ORT SCIN KCOR.CNI IE
L
IR OUT
AB C D
N
,H 74670.J. ASU
NETPWR SETUP
GY24 Z
NET
CNXRMCS
Connection
Operations Guide – DOC. 8175A Current Sensor for Room Solution Boxes: CNXRMCS •3
Current Sensor for Room Solution Boxes Crestron CNXRMCS
CNXRMCS Hookup Diagram
9"or Larger Television
or High Current Device
Room Solution Box
CNXRMC, CNXRMCLV
or I/O port of a Control
Processor
CNXRMCS
Power Plug
2-pin
Connector
(SENS)
To 120VAC Plug
Programming
For a control system to recognize the ON/OFF state of a high current
device from the CNXRMCS, a program must be created in SIMPL
Windows. The <Current Sense> output goes high when the monitor (i.e.,
television) in the room is on, and low when the monitor is off. The
CNXRMCS provides a contact closure and is attached to the two-pin port
(labeled SENS) on the CNXRMC or CNXRMCLV. Refer to the latest
version of the CNXRMCLV (Doc. 8161) Operations Guide in the
Downloads | Product Manuals section of the Creston website
(www.crestron.com) for more information.
4 •Current Sensor for Room Solution Boxes: CNXRMCS Operations Guide – DOC. 8175A
Crestron CNXRMCS Current Sensor for Room Solution Boxes
Problem Solving
Troubleshooting
The table below provides corrective action for possible problems with the
CNXRMCS. If further assistance is required, please contact a Crestron
customer service representative.
CNXRMCS Troubleshooting
TROUBLE POSSIBLE
CAUSES
CORRECTIVE ACTION
Television or other
high current device not
drawing enough
current to trigger
CNXRMCS.
If the device does not draw
enough current, Crestron
recommends that you use the
ST-CS or CNCS Current
Sensors. Refer to the latest
revisions of the ST-CS (DOC.
5677) or CNCS (DOC. 8079)
Operation Guides, in the
Downloads | Product
Manuals section of the
Crestron website
(www.crestron.com)
for more information.
Television not
operating properly.
Verify that the television turns
OFF/ON manually.
Room Solution
Box not sensing
television
OFF/ON status.
CNXRMCS digital
output wires or
connector not firmly
connected.
Verify that each digital output
wire and the 2-pin connector
are firmly connected.
CNXRMCS is not
receiving power.
Confirm that the power outlet
has AC voltage and that the
CNXRMCS is firmly plugged
in the outlet.
No power to
television or
other high
current device.
CNXRMCS is not
transferring power to
its outlet.
Confirm that the CNXRMCS
outlet has AC when plugged
in the power outlet and the
high current device plug is
firmly plugged in the
CNXRMCS outlet.
Operations Guide – DOC. 8175A Current Sensor for Room Solution Boxes: CNXRMCS •5
Current Sensor for Room Solution Boxes Crestron CNXRMCS
Further Inquiries
If after reviewing this Operations Guide for the CNXRMCS, you cannot
locate specific information or have questions, please take advantage of
Crestron's award winning customer service team by calling:
• In the US and Canada, call Crestron’s corporate headquarters at
1-888-CRESTRON [1-888-273-7876].
• In Europe, call Crestron International at +32-15-50-99-50.
• In Asia, call Crestron Asia at +852-2341-2016.
• In Latin America, call Crestron Latin America at
+5255-5093-2160.
• In Australia and New Zealand, call Crestron Control Solutions
at +61-2-9737-8203.
Future Updates
As Crestron improves functions, adds new features, and extends the
capabilities of the CNXRMCS, additional information may be made
available as manual updates. These updates are solely electronic and
serve as intermediary supplements prior to the release of a complete
technical documentation revision.
Check the Crestron website (www.crestron.com) periodically for manual
update availability and its relevance. Updates are available from the
Download | Product Manuals section and are identified as an
“Addendum” in the Download column.
6 •Current Sensor for Room Solution Boxes: CNXRMCS Operations Guide – DOC. 8175A
Tabla de contenidos
Otros manuales de Accesorios de Crestron
Crestron
Crestron 1700C-BTNB-BEZELS Cómo utilizar
Crestron
Crestron GLS-OIR-CSM-EX-BATT Manual de usuario
Crestron
Crestron INETS-IOEX-DOOR-BATT Manual de usuario
Crestron
Crestron 1700C-BEZEL Cómo utilizar
Crestron
Crestron GLS-ODT-C-CN Manual de usuario
Crestron
Crestron AAE Manual de usuario
Crestron
Crestron ST-CS Manual de usuario
Crestron
Crestron Zum ZUMMESH-PIR-OCCUPANCY-BATT Manual de usuario
Crestron
Crestron (Wattstopper P/N LS-290C) Photocell Light Sensor... Cómo utilizar
Crestron
Crestron CT/LC-FPAR1000 Manual de usuario
Crestron
Crestron FT2A-PWR-IT Series Manual de usuario
Crestron
Crestron GLS-ODT-C-CN Manual de usuario
Crestron
Crestron GLS-ODT-C-CN Manual de usuario
Crestron
Crestron ST-VS Manual de usuario
Crestron
Crestron IRP2 Manual de usuario
Crestron
Crestron GLS-ODT-C-2000 Cómo utilizar
Crestron
Crestron CT/LC-WPK Manual de usuario
Crestron
Crestron 1700C-BTNB-BEZEL Cómo utilizar
Crestron
Crestron CNTV-CS Manual de usuario
Crestron
Crestron B-G2-FP Manual de usuario
