7
Connecon via the 3.5mm stereo cable (non Bluetooth opon)
- Connect your device to the 3.5mm port using a stereo
audio cable.
- Play audio from any device ulizing the 3.5mm output port.
Connecon via Bluetooth
- Hold for several seconds to Power On.
- Listen for Power On tone, followed by Bluetooth pairing
signal.
- Enable Bluetooth funcon on your device.
- Speaker will remain in pairing mode unl located on the
device list.
- Select “CRAVE Curve” speaker from the device list.
Once paired, you will hear Bluetooth connected tone.
For best sound quality:
Place the speaker base on a hard surface.
Face the speaker in direcon of user.
Keep the device within speaker range.
AUDIO CONTR L
01
02
03
