
6
Connecon via the 3.5mm stereo cable
(non Bluetooth opon)
- Connect your device to the 3.5mm port using a stereo
audio cable.
- Play audio from any device ulizing the 3.5mm output port.
CONNECT VITY
Connecon via Bluetooth
- Hold for several seconds to Power On.
- Listen for Power On tone, followed by Bluetooth
pairing signal.
- Enable Bluetooth funcon on your device.
- Speaker will remain in pairing mode unl
located on the device list.
- Select “CRAVE Curve Mini” speaker from the device list.
Once paired, you will hear Bluetooth connected tone.