Craftsman Workbench Manual de usuario

OPERATOR'S MANUAL

CRRFTSMRN °

WORKBENCH

CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.

Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA.

F1483

fSAFETY WARNINGS AND CAUTIONS:

Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.

Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.

• DO NOT stand on this product. You may fall which may cause personal injury.

• DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.

Appropriately secure this product before moving it with a forklift.

• DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.

• DO NOT alter this product in any manner. For example, do not weld external Iockbars or attach electrical equipment. This may cause

product damage or personal injury.

Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may cause

personal injury or product damage.

• BE CAREFUL when opening more than one drawer. The product may become unstable and tip, which may cause personal injury or

product damage.

• DO NOT step in the drawers. You may fall which may cause personal injury.

The maximum weight for each drawer should be no more than 35 pounds.

Maximum combined weight limit not to exceed 1,450 pounds. If the limit is exceeded, the product could collapse and cause personal injury

or product damage.

k. j

Tools Required: Hardware Included:

3/8" Wrench

7/16" Wrench AA (34) EE (34)

11/32" Wrench

Drill

1/8" Drill bit

Screwdriver, Phillips

Screwdriver, Flathead BB (20) FF (34)

CO (12) _GG (12)

DD (6)

(Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts. Refer to Service Parts Drawing for full listing of Service Parts. )

C(4)

D(3)

G(6)

E(2)

A(2) B(2)

H(3)

STEP1

AA (16)

BB (8)

EE (16)

FF (16)

Attach B to A with BB.

(2)

Assemble A(2) and C(4).

C (4)

Square unit and wrench tighten to 40-50 in/Ibs. (Finger

tighten and approximately 1/2 wrench turn).

fSTEP 2

AA(10)

EE (10)

FF (10)

Note: It may be easier to turn unit upside down for steps 2 and 3.

• Attach D(3).

D (3)

Wrench tighten to 40-50 in/Ibs (finger tighten and

approximately 1/2 wrench turn).

STEP3

AA (8)

EE(8)

FF (8)

Attach E(2).

(2)

Wrench tighten to 40-50 in/Ibs (finger tighten and

approximately 1/2 wrench turn).

STEP 4

Release

BB(12)

CC (12)

GG (12)

Separate slide parts.

Release:

Raise or lower

Attach (2) Gd to each H.

Wrench tighten.

-H (3)

fSTEP 4Continued

Attach Gu(6) to unit.

I#[O]llll_l

Gu (6)

NOTE: Drawers may be organized in several configurations,

below is the slide positioning for the recommended drawer

configuration.

:::::::::: F

:::::::::: a

.......... O

-N fSTEP 5

If Backwall with Metal Pegboard is purchased with

this Workbench, see Backwall instructions for

assembly before continuing to assemble the

Workbench. Do NOT assemble top before returning

to these instructions.

Position J as desired.

Mark centers of (6) square mounting holes.

Square

Mounting

Hole_

Turn J over. (Use packaging material to avoid scratching).

Drill (6) 1/8" pilot holes 1/2" deep.

fSTEP 5 - Continued

• Reposition J on unit.

• Attach with DD (6).

DD(6)

STEP 6

Insert the drawer slides (Gd) into the workbench slides

(Gu) and push all of the way to the back.

Pull the drawer open until it stops to ensure proper

assembly.

Carefully align slides and

push drawer into

unit until drawer stops.

REMOVING AND INSTALLING DRAWERS:

Empty the drawer.

Fully extend the drawer.

Release

Lever style- Lift or lower (depending on the slide) the

release lever on both sides and pull drawer out to

remove.

Tab style- Depress the release tabs on both sides and

pull drawer out to remove.

To reinstall, carefully align the slides and push the

drawer into the unit until the drawer stops.

t_. Lubricate the slides with grease or equivalent, (twice

yearly).

• Periodically the drawer fronts, drawer trim, and other

surfaces should be cleaned with a mild detergent and water.

• Auto wax will preserve the unit's luster finish. Apply the wax

as to a car. The wax will also help protect the unit against

scratches.

• Grease and oil can be removed with most standard

cleaning fluids. For safety, use a nonflammable cleaning

fluid.

MANUAL DE USUARIO

CRRFTSMRN °

BANCO DE TRABAJO

ATENClON: Lea y siga todas las Normas de Seguridad y las Instrucciones de Funcionamiento antes de

utilizar por primera vez este producto.

Sears, Roebuck and Co., Hoffman Estates, lL 60179, USA. F1483

fADVERTENCIAS Y PRECAUCIONES DE SEGURIDAD:

Utilice un equipo de seguridad apropiado cuando use herramientas electricas y manuales. De Io contrario podria ocasionarse lesiones

personales o dafiar el producto.

Utilice el personal adecuado para el montaje y el traslado de esta unidad. De Io contrario podria ocasionarse lesiones personales o dafiar

el producto.

NO se ponga de pie encima de este producto. Podria caerse y causarse lesiones personales.

NO monte este producto en la plataforma de un cami6n ni en ning_n objeto en movimiento. Esto podria causarle lesiones personales o

daSar el producto.

Asegure de forma adecuada este producto antes de moverlo con una carretilla elevadora.

NO Io remolque con equipo electrico. El producto podria volcar Io que podria causarle lesiones personales o dafiar el producto.

NO altere este producto de modo alguno. Esto podria daSar el producto o causarle lesiones personales.

Mantenga el producto sobre superficies planas. El producto puede desestabilizarse y volcar si se almacena o se mueve en superficies no

lianas, Io cual podria causar lesiones personales o dafiar el producto.

TENGA CUIDADO al abrir mas de un cajon. El producto podria desestabilizarse y volcar Io que podria causarle lesiones personales o

dafiar el producto.

NO se ponga de pie encima de los cajones. Podria caerse y causarse lesiones graves.

El peso maximo en cada gaveta no debe ser mayor de 35 libras.

El peso maximo combinado no debe exceder alas 1,450 libras. Si se excede este limite, el producto podria derrumbarse y causar lesiones

personales o dafiar el producto. ,J

Herramientas necasarias: Ferreteria incluida:

Llavelnglesade3/8" /_ \

Llave inglesa de 7/16" AA (34) _ EE (34)

Llave Inglesa de 11/32"

Talladro

Broca de 1/8 de pulgada

Destomillador Philips BB (20) _ FF (34)

Destomillador

de cabeza plana

CC (12) _GG (12)

DD (6)

Llame al 1-800-659-7084 para Piezas de Servicio. Consulte el dibujo de piezas de servicio si desea un listado completo de piezas de servicio) i

Otros manuales para Workbench

Tabla de contenidos

Idiomas:

Otros manuales de Almacenamiento de herramientas de Craftsman

Craftsman

Craftsman 706650280 Manual de usuario

Craftsman

Craftsman 706.366440 Manual de usuario

Craftsman

Craftsman Accessory Manual de usuario

Craftsman

Craftsman 76633 Butcher Block Manual de usuario

Craftsman

Craftsman 31013 Manual de usuario

Craftsman

Craftsman HEAVY DUTY TOOL CHESTS Manual de usuario

Craftsman

Craftsman F1726 Manual de usuario

Craftsman

Craftsman 120.29684 Manual de usuario

Craftsman

Craftsman 18383 Manual de usuario

Craftsman

Craftsman PROJECT CENTER Manual de usuario

Craftsman

Craftsman Workbench Manual de usuario

Craftsman

Craftsman BALL BEARING SERIES Manual de usuario

Craftsman

Craftsman F1725 Manual de usuario

Craftsman

Craftsman 706.591870 Manual de usuario

Craftsman

Craftsman BALL BEARING SERIES Manual de usuario

Craftsman

Craftsman GARAGE STORAGE SOLUTIONS Manual de usuario

Craftsman

Craftsman HEAVY DUTY TOOL CHESTS Manual de usuario

Craftsman

Craftsman Accessory Manual de usuario

Craftsman

Craftsman STATIONARY STORAGE UNIT Manual de usuario

Craftsman

Craftsman 706.825470 Manual de usuario

Craftsman

Craftsman evolv F1711 Manual de usuario

Craftsman

Craftsman F1198A5 Manual de usuario

Craftsman

Craftsman PROFESSIONAL SERIES Manual de usuario

Craftsman

Craftsman 14927 Manual de usuario

Manuales populares de Almacenamiento de herramientas de otras marcas

Ryobi

Ryobi RWB03 Manual de usuario

Husky

Husky H27CH5TR4BGK Manual de usuario

Scheppach

Scheppach ts 2100 Manual de usuario

Cornwell Tools

Cornwell Tools CTB360AKBK Manual de usuario

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manual de usuario

Cassese

Cassese CS200 CART Manual de usuario

Kendall Howard

Kendall Howard ESDW-9630-1000 Manual de usuario

Lista

Lista Align Instrucciones de montaje

Workzone

Workzone 99609 Manual de usuario

Stanley

Stanley STST83800-1 Manual de usuario

Homak

Homak PROFESSIONAL Series Manual del sistema

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manual de usuario

Husky

Husky H5CH2R Manual de usuario

BGS technic

BGS technic 4107 Manual de usuario

Clarke

Clarke CWB1250 Manual de usuario

Ryobi

Ryobi RWB02 Manual de usuario

Husky

Husky H52CH6HDV3WHT Manual de usuario

Sealey

Sealey PTB66004 Manual de usuario