Craftsman 120.29684 Manual de usuario

USER iNSTRUCTiONS

[RA Iq

8 Drawer- 28 in,

Contour Storage Combo

Model: 120.29683 (Chest}

Model: 120.29684 (Cabinet}

SAFETY iNSTRUCTiONS

WARNING: Read all Safety Instructions before

assembling and using this product.

• WEAR SAFETY GLASSES AND GLOVES when

assembling this product.

• BE CAREFUL of sharp edges.

• DO NOT stand on this product. You may fall which may

cause personal injury.

• DO NOT alter this product in any manner. For example,

do not weld external lock bars or attach electrical

equipment to it. This may cause product damage or

personal injury.

• Keep the product on a level surface. The product may

become unstable and tip if stored or moved on a tilted

surface, and may cause personal injury or product

damage.

• The maximum weight for each loaded drawer of the

Chest should be no more than 70 Ibs. The maximum

weight for each loaded drawer of the Cabinet should be

no more than 100 Ibs.

ALWAYS WEAR ANSI approved safety goggles when

working with tools and equipment.

WARNING: TAKE SAFETY PRECAUTIONS

WHEN USING YOUR TOOL CHEST /CABINET

Donotopenmore Donotstep D0notlet

thanonedrawer orleanonthe childrennear

atatime. drawers, thet0ol chest.

REPLACEMENT PARTS

Refer to product illustration and parts list for parts

locations and numbers. To order replacement

parts, call 1=800=4MY=HOME ® (1=800=469=4663).

Setthebrakeon Lockdrawersand

thelockingcasters lidbeforemoving

unlessyouare thet001chest.

movingthet001chest.

Whereapplicable

Whenaddingachest,alladd-on

topsmustberemovedfromthe

rollercabinet.Besureboth

connectorbracketsareinplace

andsecure.

CHEST

The chest keys are taped to the top storage area of

the chest. The key code is printed on the face of the

chest lock.

Ref. # Description Part # Qty

1 Mechanical strut 303065 2

2 Chest handle 306046 2

3 Slide (right) 300114R 4

4 Slide (left) 300114L 4

5 Lock 304000 1

6 M6X12 hex bolt 321054 2

7 Connector 200837 2

6 _7

ASSEMBLY

Assembly requires 10mm and 14mm sockets or wrenches.

To install the handles, simply position them over the holes

and attach with the bolts provided. Tighten securely.

/.- _ ._

CABINET

The cabinet keys are taped to the top of the caster

shipping box located in the bottom drawer of the cabinet.

The key code is printed on the face of the cabinet lock.

Ref. # Description Part # Qty

1 Cabinet handle 306078 1

2 M6x20 hex bolt 321054 4

3 Swivel caster 302066 2

4 M8x20 hex bolt 321027 16

5 Washer 324255 16

6 Slide (left) 300114L 4

7 Slide (right) 300114R 4

8 Fixed caster 302067 2

9 Lock 304000 1

INSTALLING CASTERS

Carefully lay bottom cabinet on its back, with a soft mat

under the back for the purpose of protection. Remove

caster attachment bolts from bottom of cabinet. Position

the two swivel casters on the same side of the cabinet

bottom. Insert the bolts through washers, then through

the casters and into the cabinet bottom. Tighten securely.

Repeat for the two rigid casters on the other side.

iNSTALL CHEST ON CABINET

With the help of another person, install chest on top of

cabinet inside of the 4 corner stays. The chest will stay

securely atop the cabinet under its own weight.

OPERATION

CHEST AND CABINET CONNECTION

WARNING: (Where applicable) When adding a

chest, all add-on tops must be removed from the

roller cabinet. Be sure both connector brackets

are in place and secure.

Place the chest on the cabinet. Attach the connectors

making sure the connectors slide into the openings on the

back of the chest. Fasten the connectors to the back of

the chest with screws.

x\\\

To remove drawers

Empty drawer. Pull drawer out to almost full extension.

Push up on right hand black release lever, while pulling

down on left hand black release lever. While holding the

levers in the positions as instructed above, pull the

drawer outward until it is released from the drawer slide.

PUSH UP

(RIGHT HAND SIDE)

". ,_................... c::::2 ..... :-j_,

PULL DOWN

(LEFT HAND SIDE)

To replace drawers

Empty drawer. Extend the drawer slides from the tool

chest, insert the brackets on each side of the drawer into

the slots in the cabinet slides, being careful that they are

properly positioned. Once properly inserted, completely

close the drawer to set the slides in their proper positions.

RAISE AND RELEASE DRAWER FRONTS:

These units are equipped with the raise and release drawer

fronts. To open, lift up on the drawer front while pulling

towards you. To close, shut the drawer firmly until the latch

engages. If the drawer does not stay closed, the hook may

be bent, or it may rub against the drawer slides. To fix this

problem, lightly bend the hook until the drawer will engage

in the slide.

[ q

[

CRAFTSMAN THREE YEAR LIMITED WARRANTY

FOR THREE YEARS from the date of purchase, this

product is warranted against any defects in material or

workmanship. With proof of purchase, a defective part will

be replaced free of charge. If a replacement part is unavail-

able, the product will be replaced with one of equal value.

This warranty does not apply to a product that is

damaged or altered through misuse, abuse, accident,

neglect, modification or mishandling.

For warranty coverage details, visit the web site:

www.craftsman.com

This warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

SearsBrandsManagement Corporation,

Hoffman Estates, IL 60179

REPLACEMENT PARTS

Refer to product illustration and parts list for parts

locations and numbers, To order replacement parts, call

1=800=4MY=HOME ® {1=800=469=4663}.

For replacement keys: key codes are printed on the face

of the locks.

Este manual sirve para los siguientes modelos

Otros manuales de Almacenamiento de herramientas de Craftsman

Craftsman

Craftsman 706.139890 Manual de usuario

Craftsman

Craftsman AXS 706.59668 Manual de usuario

Craftsman

Craftsman 706.657840 Manual de usuario

Craftsman

Craftsman 3000 Series Manual de usuario

Craftsman

Craftsman F1294 Manual de usuario

Craftsman

Craftsman 18383 Manual de usuario

Craftsman

Craftsman Accessory Manual de usuario

Craftsman

Craftsman evolv F1711 Manual de usuario

Craftsman

Craftsman 706.105950 Manual de usuario

Craftsman

Craftsman STATIONARY STORAGE UNIT Manual de usuario

Craftsman

Craftsman 351.221050 Manual de usuario

Craftsman

Craftsman F1726 Manual de usuario

Craftsman

Craftsman 31018 Manual de usuario

Craftsman

Craftsman 28180 - Fixed-Base Router/Table Combo Manual de usuario

Craftsman

Craftsman Side Cabinet with SS Protect-it Manual de usuario

Craftsman

Craftsman Workbench Manual de usuario

Craftsman

Craftsman 706.153410 Manual de usuario

Craftsman

Craftsman Tool Storage Roll-Away Manual de usuario

Craftsman

Craftsman 706597412 Manual de usuario

Craftsman

Craftsman Professional Series Chests and Roller... Manual de usuario

Craftsman

Craftsman HEAVY DUTY TOOL CHESTS Manual de usuario

Craftsman

Craftsman 695.65857 Manual de usuario

Craftsman

Craftsman 76633 Butcher Block Manual de usuario

Craftsman

Craftsman 706.366440 Manual de usuario

Manuales populares de Almacenamiento de herramientas de otras marcas

Ryobi

Ryobi RWB03 Manual de usuario

Husky

Husky H27CH5TR4BGK Manual de usuario

Scheppach

Scheppach ts 2100 Manual de usuario

Cornwell Tools

Cornwell Tools CTB360AKBK Manual de usuario

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manual de usuario

Cassese

Cassese CS200 CART Manual de usuario

Kendall Howard

Kendall Howard ESDW-9630-1000 Manual de usuario

Lista

Lista Align Instrucciones de montaje

Workzone

Workzone 99609 Manual de usuario

Stanley

Stanley STST83800-1 Manual de usuario

Homak

Homak PROFESSIONAL Series Manual del sistema

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manual de usuario

Husky

Husky H5CH2R Manual de usuario

BGS technic

BGS technic 4107 Manual de usuario

Clarke

Clarke CWB1250 Manual de usuario

Ryobi

Ryobi RWB02 Manual de usuario

Husky

Husky H52CH6HDV3WHT Manual de usuario

Sealey

Sealey PTB66004 Manual de usuario