Craftsman Nextec HAMMERHEAD 320.61352 Manual de usuario

Operator's Manual

nT HAMMERHEAD TM

12.0-VOLT

LITHIUM-ION CORDLESS

AUTO-HAMMER

Model No. 320. 61352

ENERGYSTAR"

quaJified battery

charger for a

better environment

WARNING: To reduce the risk of injury,

the user must read and understand

this Operator's manual before using

this product.

*Warranty

*Safety

*Assembly

* Operation

*Maintenance

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

www,craftsman,com

IB-61352

Warranty Page 2

Safety Symbols Page 3

Safety Instructions Pages 5-10

Description Pages 11-12

Assembly Page 12

Operation Pages 13-16

Maintenance Page 17

Troubleshooting Page 17

Exploded View and Parts List Pages 18-19

Sears Repair Parts Phone Number Back Cover

ONE YEAR FULL WARRANTY ON CRAFTSMAN® TOOL

If this Craftsman tool fails to give complete satisfaction within one year

from the date of purchase, return it to any Sears store or parts & repair

center or other craftsman outlet in the United States for free repair (or

replacement, if repair proves impossible).

This warranty does not include expendable parts such as lamps,

batteries, bits, or blades.

This warranty applies for only 90 days from the date of purchase if this

product is ever used for commercial or rental purposes.

This warranty gives you specific legal rights, and you may also have

other rights which vary from state to state.

Sears, Roebuck and Co., Hoffman Estates IL 60179

iNTRODUCTiON

SAVE THESE iNSTRUCTiONS

This Auto-Hammerr has many features for making its use more pleasant and

enjoyable. Safety, performance, and dependability have been given top priority

in the design of this product making it easy to maintain and operate.

,_ WARNING: Some dust created by using power tools contains chemicals

known to the state of California to cause cancer and birth defects or other

reproductive harm.

63_352 Manual_Revised_08 0924 Page 2

The purpose of safety symbols is to attract you attention to possible dangers.

The safety symbols, and the explanations with them, deserve your careful atten-

tion and understanding. The symbol warnings do not, by themselves, eliminate

any danger. The instructions and warning they give are no substitutes for proper

accident prevention measures.

WARNING: Be sure to read and understand all safety instructions in this

manual, including all safety alert symbols such as "DANGER," "WARNING," and

"CAUTION" before using this Auto-Hammer. Failure to following all instructions

listed below may result in electric shock, fire, and/or serious personal injury.

SYMBOL SIGNAL MEANING

_. DANGER: Indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation, which, if not avoided,

could result in death or serious injury.

CAUTION: Indicates an imminently hazardous situation, which, if not

avoided, may result in death or serious injury.

CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in

property damage.

WARNING: To ensure safety and reliability, all repairs should be performed

by a qualified service technician at Sears Service Center.

WARNING: The operation of any power tools can result in

foreign objects being thrown into your eyes, which can result

in severe eye damage. Before beginning power tool operation,

always wear safety goggles or safety glasses with side shield

and a full face shield when needed. We recommend a Wide

Vision Safety Mask for use over eyeglasses or standard safety

glasses with side shields. Always use eye protection which is

marked to comply with ANSI Z87.1

SAVE THESE INSTRUCTIONS

61352 Manual_Revised_08 0924 Page 3

Some of these following symbols may be used on this tool. Please study them

and learn their meaning. Proper interpretation of these symbols will allow you to

operate the tool better and safer.

SYMBOL NAME DESIGNATION/EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

Alternating Current Type of current

Direct Current Type or a characteristic of current

n o No Load Speed Rotational speed, at no load

] Class II Construction Double-insulated construction

.../min Per Minute Revolutions, strokes, surface speed,

orbits, etc., per minute

Wet Conditions Alert Do not expose to rain or use in damplocations.

To reduce the risk of injury, user must

Read The Operator's Manual read and understand operator's manual

before using this product.

Always wear safety goggles or safety

Eye Protection glasses with side shields and a full face

shield when operating this product.

Alert Precautions that involve

Safety your safety.

Failure to keep your hands away from the

No Hands Symbol blade will result in serious personal injury.

Failure to keep your hands away from the

No Hands Symbol blade will result in serious personal injury.

No Hands Failure to keep your hands away from the

Symbol blade will result in serious personal injury.

Failure to keep your hands away from the

No Hands Symbol blade will result in serious personal injury.

Hot Surface To reduce the risk of injury or damage,avoid contact with any hot surface.

61352 Manual_Revised_08 0924 Page 4

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all

instructions listed below may result in electric shock, fire, and/or serious

personal injury. The term "power tool" in all of the warnings listed below refer to

corded power tools or battery-operated (cordless) power tools.

READ AND SAVE THESE INSTRUCTIONS

Know your Auto=Hammer. Read the operator's manual carefully. Learn

the tool's applications and limitations, as well as the specific potential

hazards related to this Auto=Hammer. Following this rule will reduce the

risk of electric shock, fire or serious injury.

Use only the recommended battery pack and charger. Any attempt to use

another battery pack will cause damage to the Auto-Hammer, which could

then possibly explode, or cause a fire or personal injury.

Use the battery only with charger listed below.

BATTERY PACK CHARGER

320.11221 320.10006

Remove the battery pack from the Auto-Hammer before performing any

routine maintenance or cleaning.

Do not disassemble the Auto-Hammer.

Do not place the Auto=Hammer or battery pack near fire or heat. They

may explode. Do not incinerate the battery, even if it severely damaged or

completely worn out. The battery may explode in fire.

Do not operate the Auto-Hammer or charger near flammable liquids or

in agaseous or explosive environment. Internal sparks may ignite fumes.

To reduce the risk of electric shock, do not put the Auto-Hammer,

battery, or charger in water or other liquid. Do not place or store product

where it can fall or be pulled into a tub or sink.

Do not store the Auto=Hammer in a damp or wet location. Do not store it

in locations where the temperature is less than 32°F (0°C) or more than

104°F (40°C). Do not store it outside or in vehicles.

Do not permit children to use the Auto-Hammer unsupervised. It is not a

toy. The Auto-Hammer may become hot after being on for a period of time.

This increased temperature can cause a burn injury of touched.

6:$352 Manual_Revised_08 0924 Page 5

Keep the Auto-Hammer dry, clean, and free from oil and grease. Always

use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-

based products or any strong solvent to clean the hammer.

Do not expose the Auto=Hammer to rain or wet conditions. Water

entering the tool will increase the risk of electric shock.

Do not overreach. Keep proper footing and balance at all times. This

enables better control of the Auto-Hammer in unexpected situations. Do not

use on a ladder or unstable support.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive environments, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool.

Distractions cause you to lose control.

ELECTRICAL SAFETY

Avoid body contact with grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your

body is grounded.

Power tool plugs must match the outlet. Never modify the plug in

any way. Do not use any adapter plugs with grounded power tools.

Unmodified plugs and matching outlets will reduce the risk of electric shock.

Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep the cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords increase the risk of electric

shock.

= When operating a power tool outdoors, use an extension cord suitable

for outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the influence of drugs, alcohol, or medication. A moment of inattention

while operating power tools may result in serious personal injury.

6:$352 Manual_Revised_08 0924 Page 6

Use safety equipment. Always wear eye protection. Safety equipment,

such as dust masks, non-skid safety shoes, hard hat and hearing protection,

used for appropriate conditions will reduce personal injuries.

Avoid accidental starting. Ensure that the switch is in the off position before

plugging in. Carrying power tools with your finger on the switch or plugging

in power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A

wrench or key left attached to a rotating part of the power tool may result in

personal injury.

Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewelry or

long hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used. Use

of these devices can reduce dust-related hazards.

Use clamps or another practical way to secure and support the work=

piece to a stable platform. Holding the work by hand or against your body

leaves it unstable and may lead to loss of control.

Do not use on aladder or unstable support. Stable footing on a solid

surface enables better control of the power tool in unexpected situations.

Keep handles dry, clean, and free from oil and grease. Slippery hands

can not safely control the power tool.

Always wear safety glasses with side shields. Everyday glasses have only

impact resistant lenses. They are NOT safety glasses. Following this rule will

reduce the risk of eye injury.

Protect your lungs. Wear a face or dust mask if the operation is dusty.

Following this rule will reduce the risk of serious personal injury.

Protect your hearing. Wear hearing protection during extended periods of

operation. Following this rule will reduce the risk of serious person injury.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and more safely at

the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any

power tool that cannot be controlled with the switch is dangerous and must

be repaired.

61352 Manual_Revised_08 0924 Page 7

Disconnect the plug from the power source and/or the batter pack from

the power tool before making any adjustments, changing accessories,

or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts, and any other condition that may affect the

power tool's operation, if damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc., in accordance with

these instructions and in the manner intended for the particular type

of power tool, taking in account the working conditions and the work

to be performed. Use of the power tool for operations different from those

intended could result in a hazardous situation.

Hold power tools by insulated gripping surfaces when performing an

operation where the cutting tool may contact hidden wiring or its own

cord. Contact with a "live" wire will also make exposed metal parts of the

tool "live" and shock the operator.

Know your power tool. Read the product manual carefully. Learn its

applications and limitations, as well as the specific potential hazards

related to this tool. Following this rule will reduce the risk of electric shock,

fire or serious injury.

Save these instructions. Refer to them frequently and use them to instruct

others who may use this tool. If you loan someone this tool, also loan them

these instructions.

BATTERY TOOL USE AND CARE

= Ensure the switch is in the off position before inserting battery pack.

inserting the battery pack into power tools that have the switch on invites

accidents.

Recharge only with the charger specified by the manufacturer. A charger

that is suitable for one type of batter pack may create a risk of fire when used

with another battery pack.

Use power tools only with specifically designated battery packs. Use of

any other battery packs may create a risk of injury and fire.

61352 Manual_Revised_08 0924 Page 8

When the battery pack is not in use, keep it away from other metal

objects, such as paper clips, coins, keys, nails screws or other small

metal objects that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from the battery.

Avoid contact, if contact accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

Battery tools do not have to be plugged into an electrical outlet;

therefore, they are always in operating condition. Be aware of

possible hazards when not using your battery tool or when changing

accessories. Following this rule will reduce the risk of electric shock, fire, or

serious personal injury.

Do not place battery tools or their batteries near fire or heat. This will

reduce the risk of explosion and possibly injury.

Do not crush, drop or damage the battery pack. Do not use a battery

pack or charger that has been dropped or received a sharp blow. A

damaged battery is subject to explosion. Properly dispose of a dropped or

damaged battery immediately.

Batteries vent hydrogen gas and can explode in the presence of a

source of ignition, such as a pilot light. To reduce the risk of serious

personal injury, never use any cordless product in the presence of open

flame. An exploded battery can propel debris and chemicals, if exposed,

flush with water immediately.

Do not charge the battery tool in a damp or wet location. Following this

rule will reduce the risk of electric shock.

Under extreme usage or temperature conditions, battery leakage may

occur. If liquid comes in contact with your skin, wash immediately wit

soap and water, then neutralize with lemon juice or vinegar, if liquid gets

in your eyes, flush them with clean water for at least 10 minutes, and then

seek immediate medical attention. Following this rule will reduce the risk of

serious personal injury.

For best results, your battery tool should be charged in alocation where

the temperature is more that 32°F (0°C) but less that 104°F (40°C). Do

not store outside or in vehicles.

61352 Manual_Revised_08 0924 Page 9

SERVICE

=Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the power

tool is maintained.

• When servicing a power tool, use only identical replacement parts.

= Follow instructions in the Maintenance section of this manual. Use of

unauthorized parts or failure to follow Maintenance instructions may create a

risk of shock or injury.

SPECiFiC SAFETY RULES FOR CORDLESS AUTO-HAMMER

Hold power tools by the insulated gripping surfaces when performing

an operation where the tool may contact hidden wiring or its own cord.

Contact with a "live" wire will also make exposed metal parts of the tool

"live" and shock the operator.

Do not insert or try to insert your finger into the hammer sleeve at any

time, failure to do so could result in personal injury. Your finger may get hurt.

Do not stare into the LED worklight directly; never project the worklight to

others' eyes.

Never put your hand continuously on the nail when hammering. Only use

your hand to hold the nail on the workpiece at the beginning of hammering.

This Auto-Hammer is to be used for the nails with diameter less than

7/16-in and length less than 2 1/2-in.

Use clamps or another practical way to secure and support the

workpiece to a stable platform before hammering. Holding the work by

hand against your body leaves it unstable and may lead to loss of control.

WARNING: Wear ear protection. Exposure to noise can cause

hearing loss.

WARNING: To reduce the risk of injury, user must read instruction manual.

61352 Manual_Revised_08 0924 Page 10

Tabla de contenidos

Otros manuales de Herramientas eléctricas de Craftsman

Craftsman

Craftsman 103.0404 Manual de usuario

Craftsman

Craftsman 137.219120 Manual de usuario

Craftsman

Craftsman CMCCSL621 Manual de usuario

Craftsman

Craftsman 315.174921 Manual de usuario

Craftsman

Craftsman 9-19905 - 1/2dr 1/4npt 500ft/lb Sq Dr Impact... Manual de usuario

Craftsman

Craftsman 315.268350 Manual de usuario

Craftsman

Craftsman 315.115860 Manual de usuario

Craftsman

Craftsman CMCCSL621 Manual de usuario

Craftsman

Craftsman 320.17542 Manual de usuario

Craftsman

Craftsman CMCF600 Manual de usuario

Craftsman

Craftsman 315.115960 Manual de usuario

Craftsman

Craftsman 137.219001 Manual de usuario

Craftsman

Craftsman 320.23465 Manual de usuario

Craftsman

Craftsman 113.213843 Manual de usuario

Craftsman

Craftsman 900.277303 Manual de usuario

Craftsman

Craftsman 351.252741-3 Manual de usuario

Craftsman

Craftsman 315.275110 Manual de usuario

Craftsman

Craftsman 17540 - 9.5 Amp 1-3/4 HP Plunge Base Router Manual de usuario

Craftsman

Craftsman 152.229020 Manual de usuario

Craftsman

Craftsman 103.23340 Manual de uso y cuidado

Craftsman

Craftsman 113.213780 Manual de usuario

Craftsman

Craftsman 875.199330 Manual de usuario

Craftsman

Craftsman 113.239420 Manual de usuario

Craftsman

Craftsman 320.17255 Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual

Craftsman nextec HAMMERHEAD 320.61352 Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas