Cradlepoint CR4250 Manual de usuario

11/2/2020 CR4250 High-Performance Branch Router Quick Start Guide

https://customer.cradlepoint.com/s/article/CR4250-Getting-Started 1/5

CR4250 High-Performance Branch Router Quick Start Guide

Feb 7, 2020 •Knowledge

NETCLOUD MANAGEMENT

(/S/TOPIC/0TO38000000Q3MAGA…

Content

CR4250 High-Performance Branch Router Quick Start Guide

Introduction

This document provides a brief overview of the CR4250 High-Performance Branch Router, discusses what's inside the box, and provides basic setup and

installation instructions for the device.

Navigation

What's in the Box

Hardware

Accessories

Required Tools

Before You Begin

Setup

Understanding LEDs

Connecting to NetCloud

Troubleshooting

Resources

Help and Support

CR4250 Branch Router Models

What's in the Box

A CR4250 or CR4250-PoE Branch Router

A C13 power line cord

Four rubber feet for desk mounting

A Safety, Regulatory and Warranty Guide

Hardware

Caption

Search (Knowledge Base, Forums, Cases)

Home (/s/) TECHNICAL SUPPORT (/s/contactsupport) FORUMS (/s/forums) TRAINING (/s/cpu) NETCLOUD (/s/NetCloud)

11/2/2020 CR4250 High-Performance Branch Router Quick Start Guide

https://customer.cradlepoint.com/s/article/CR4250-Getting-Started 2/5

Accessories

To optimize the CR4250 High-Performance Branch Router's functionality and capabilities, consider the following optional accessories:

Cradlepoint AP22 (https://cradlepoint.com/products/ap22)

Cradlepoint ARC CBA850 (https://cradlepoint.com/products/arc-cba850)

CR4250 Rack Mount (https://cradlepoint.com/products/cr4250-rack-mount)

Before You Begin

To ensure that the CR4250 High-Performance Branch router performs optimally, consider the location and environmental temperatures before installing.

Keep the device away from reflective and metallic surfaces as they may interfere with signal reception.

Avoid mounting the router in locations that experience extreme heat or cold.

The CR4250 may be set up on a flat surface or mounted in a mounting bracket. If mounting in a mounting bracket, purchase and prepare the CR4250

Rack Mount prior to setup.

Refer to the CR4250 Safety, Regulatory, and Warranty Guide (included with your hardware) for more information about location considerations.

NOTE: Cradlepoint recommends that all Branch devices be installed by a professional. For assistance with installation or in locating a professional installer,

contact Cradlepoint Sales and Support (https://cradlepoint.com/company/contact_us).

Setup

1. Connect the WAN Source

Connect the ethernet WAN source to the WAN port of the CR4250 (Port 0 is the default).

Default WAN configuration is DHCP

If a static IP address is required for connectivity, refer to the following article: NCOS: How to connect a wired WAN connection with a static

IP address to a Cradlepoint router (https://customer.cradlepoint.com/s/article/NCOS-How-to-connect-a-wired-WAN-connection-with-a-static-

IP-address-to-a-Cradlepoint-router) .

2. Connect the Power Source

Plug the provided power supply (100-240V, 50-60Hz; 1.7A max without PoE, 4.1A max with PoE) into an electrical outlet. Then connect the

power supply to the router.

11/2/2020 CR4250 High-Performance Branch Router Quick Start Guide

https://customer.cradlepoint.com/s/article/CR4250-Getting-Started 3/5

Ensure power is switched on (O = OFF, – = ON):

When you set the power switch to the ON ( – ) position; watch for the power LED to illuminate. Refer to the Understanding LEDs section of this

document for more information about LED lights on the CR4250 router.

3. Once the device is powered on, log into NetCloud manager and complete the device setup. Refer to the Connecting to NetCloud section in this

document for more information.

Understanding LEDs

INDICATOR BEHAVIOR

Status LED

Power: The CR4250 must be powered using an approved power source. Input requirements:

100-240V, 50-60Hz; 1.7A max without PoE, 4.1A max with PoE.

LED Off = normal operation

Blinking Green (1Hz) = upgrade in progress OR a button is currently pressed

Blinking Green (4Hz) = shutdown in progress

Blinking Orange (4Hz) = factory reset in progress

Power LED

Green = Powered ON and hardware OK

No Light = Not receiving power. Check the power source connection

Red = Critical hardware problem detected. Hardware problem means that, most likely, unit

can not boot. This can happen when hardware component (RAM, CPU, Flash, etc) was

found to have a critical issue and can’t operate as expected. Contact Support.

Power

Button

Press and hold for more than 3 seconds, but less than 7 (status LED will be flashing green

at 4Hz when button released). Unit will send shutdown signal to all of its components and

will safely power down. The PWR LED will turn RED before turning off completely.

Press and hold for more than 7 seconds. Unit will do the same thing as above, but will force

shutdown of all components.

Reset

Button

To reset the device, press and hold for more than 7 seconds (status LED will be flashing

orange at 4Hz when button is released). Customer configuration will be erased and unit will

reboot. Customer entitlements will be preserved.

Return to the Top

Connecting to NetCloud

Activate your device through NetCloud Manager (NCM). Your device is packaged with NetCloud services and requires that you log into your NetCloud

account to activate your device. Refer to the following for more information:

Getting Started with NetCloud (https://customer.cradlepoint.com/s/article/Getting-Started-with-NetCloud-Manager)

Troubleshooting

11/2/2020 CR4250 High-Performance Branch Router Quick Start Guide

https://customer.cradlepoint.com/s/article/CR4250-Getting-Started 4/5

Quick Start Guide Index (/s/article/Quick-Start-Guides) 1.54K

AER2200 Branch Router Quick Start Guide (/s/article/AER2200-Getting-Started) 19 85K

If the device takes longer than 5 minutes to connect to the Internet, you may need to log into the local UI of the device to make configuration changes or to

start the troubleshooting process. You must be physically co-located with the device in order to do this. Refer to the following document for additional help:

How to Troubleshoot Connection Issues (https://customer.cradlepoint.com/s/article/NCOS-No-Internet-or-Connection-Issues)

Once the device connects to the Internet, it should then connect to your NetCloud Manager account and start its configuration download.

Resources

CR4250 Web Page (https://cradlepoint.com/products/cradlepoint-cr4250)

CR4250 Spec Sheet (https://cradlepoint.com/sites/default/files/upload-file/cr4250-spec-sheet-072019.pdf)

Help and Support

Cradlepoint Customer Connect Community (https://customer.cradlepoint.com/s/)

Cradlepoint Support Services (https://cradlepoint.com/support-services)

CR4250 Branch Router Models

This document applies to the following CR4250 Branch router models.

CRADLEPOINT CR4250 S6A819A

CRADLEPOINT CR4250-POE S6A820A

Cradlepoint Terms of Service (https://cradlepoint.com/terms-of-service)

Cradlepoint Privacy Policy (https://cradlepoint.com/privacy-policy)

Return to the Top

Title

CR4250 High-Performance Branch Router Quick Start Guide

URL Name

CR4250-Getting-Started

Networking

(/s/topic/0TO38000000CEwBGAW/…

NetCloud Management

(/s/topic/0TO38000000Q3MAGA0/…

Cellular

(/s/topic/0TO38000000Q3MBGA0/…

Routing

(/s/topic/0TO38000000Q3MCGA0/r…

WiFi

(/s/topic/0TO38000000Q3MEGA0/…

Security

(/s/topic/0TO38000000Q3MGGA0/…

Mobile

(/s/topic/0TO38000000Q3MHGA0/…

No related lists to display

Ask a Question

11/2/2020 CR4250 High-Performance Branch Router Quick Start Guide

https://customer.cradlepoint.com/s/article/CR4250-Getting-Started 5/5

AER2200 Branch Router Quick Start Guide (/s/article/AER2200 Getting Started) 19.85K

AER1600 Series Micro Branch Router Quick Start Guide (/s/article/AER1600-Series-Micro-Branch-Networking-Router) 9.92K

E300 Series Enterprise Branch Router Quick Start Guide (/s/article/E300-Series-Enterprise-Branch-Router-Quick-Start-Guide) 2.65K

E3000 Series Enterprise Branch Router Quick Start Guide (/s/article/E3000-Series-Enterprise-Branch-Router-Quick-Start-Guide) 1.85K

Manuales populares de Enrutador inalámbrico de otras marcas

Milesight

Milesight UG67 Manual de usuario

Airlogic

Airlogic AirSync Class 1 Manual del propietario

Samsung

Samsung WCH730B Manual de usuario

TELEFONICA

TELEFONICA USB Adapter Manual de usuario

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manual de usuario

Askey

Askey RAC2V1K Manual de usuario

Alloy

Alloy WLF2454AP-S Manual de usuario

TP-Link

TP-Link TL-WR542G Manual de usuario

NETGEAR

NETGEAR WNR2000v4 Manual de usuario

Hama

Hama 53120 Manual de usuario

Intellinet

Intellinet 524582 Manual de usuario

Asus

Asus RT-N10P Manual de usuario

D-Link

D-Link DIR-506L Manual de usuario

Sapido

Sapido GR297n Manual de usuario

Asus

Asus DSL-N55U Manual de usuario

AMTC

AMTC WR7502 Manual de usuario

Compaq

Compaq CP-2W - iPAQ Connection Point Manual de usuario

SMC Networks

SMC Networks WBR14-N2 FICHE Manual de usuario