1. Connect theACpowercordand plugintoanelectricaloutlet. ThePOWERLEDwill turnintoorangecolor, andother
redLEDindicatorswill turnON. It takes approximately5to15seconds toboot thesystemwiththemessage: “HDD
Detecting ”. Once successfullyconnected,thePOWERLEDwill changetogreencolor, andtheAlarmLEDwill beON.
Beforeusing the DVS, pleasehaveaHDD installedready, orit will functionas4CH multiplexer
(refertoAppendix#1forinstallationtheHDD ).
GETTING STARTED
BasicOperation
OPERATION
2. Beforeoperating theDVS,setthesystemtimefirst. (refertopage.10).
NOTE:1. IftheHDD isnotinstalled correctlyornotinstalled, the “HDD notfound”messagewill
appearfor3secondsand then return to 4CHMultiplexerdisplaymode.
2. Toswitch thesystem, pull outtheACpowercord, beforeyou reconnectthepower,
press “FF”to NTSCsystemor “REW”to PAL system andthen reconnecttheACpower
cord, theDVSwill auto-detectthesystem.
8
2002 –JAN –0101:02:03
OW
(OW: HDD Overwrite)
RECORDING
TheDVSoffers3recordingmodes. Refer P.13foradvancedsettingofrecordingspeedand
resolution.Undertherecording status, ifpower isoffaccidentally, recordedvideowill still bestoredintheHDD. DVS will
returntooriginal recordingsettingafterpowerrestoresagain.
Whileyoupress “REC”button,onthescreen, youwill find thedate,time, recordingtype,the
availableHDD spaceinGBandtheletter “ ” representstherecordingmode.
(OW: HDD Overwrite)
NOTE:1. When theHDD isfull underO/WRecording mode, previousrecorded fileswill be
overwritten withoutfurtherwarning notices.
2. IftheHDD spaceisonly5GBleft,itwilldisplay “5GB”on theup-rightscreenin
orangecolor, and itwillbuzzforseconds;soas in 4GB, 3GB,2GBand1GB.IftheO/W
Recordingmode(NOTE1)ison, itwon thave thewarning buzzer.
Thereare3recordingmodes:Alarm, TimerandManual Recording.
1. ALARMRECORDING
DVS istriggeredbyanalarminput. symbol will beshownonthetriggeredchannel.(refer topage14)
2. TIMERRECORDING
Recordingisscheduledby aTimer. It will indicateby thesymbol . (refertopage12)
3. MANUALRECORDING
Recordingisinitiatedmanuallyby pressingthe RECbutton.Symbol will beshown.
