CP Plus ORANGE CP-UVK-711M Manual de usuario

Villa Indoor Monitor

User Manual

Version 2.0.1

Foreword

General

This Quick Start Guide (hereinafter referred to be "the Guide") introduces the functions, installation, and

operations of the camera.

Safety Instructions

The following categorized signal words with defined meaning might appear in the guide.

Signal Words

Meaning

Indicates a medium or low potential hazard which, if not avoided,could

result in slight or moderate injury.

Indicates a potential risk which, if not avoided, may result in property

damage, data loss, lower performance, or unpredictableresult.

Provides additional information as the emphasis and supplementto the

text.

Privacy Protection Notice

As the device user or data controller, you might collect personal data of others' such as face, fingerprints,car plate

number, Email address, phone number, GPS and so on. You need to be in compliance with thelocal privacy

protection laws and regulations to protect the legitimate rights and interests of other people by implementing

measures include but not limited to providing clear and visible identification to inform data subject the existence

of surveillance area and providing related contact.

About this Guide

•The Guide is for reference only. If there is inconsistency between the Guide and the actualproduct,

the actual product shall prevail.

•We are not liable for any loss caused by the operations that do not comply with the Guide.

•The Guide would be updated according to the latest laws and regulations of related regions. Fordetailed

information, see the paper Quick Start Guide, CD-ROM, QR code or our official website.If there is

inconsistency between paper User's Guide and the electronic version, the electronic version shall prevail.

•All the designs and software are subject to change without prior written notice. The product updates

might cause some differences between the actual product and the Guide. Please contactthe customer

service for the latest program and supplementary documentation.

•There still might be deviation in technical data, functions and operations description, or errors inprint. If

there is any doubt or dispute, please refer to our final explanation.

•Upgrade the reader software or try other mainstream reader software if the Guide (in PDF format)cannot

be opened.

•All trademarks, registered trademarks and the company names in the Guide are the properties of their

respective owners.

•Please visit our website, contact the supplier or customer service if there is any problem occurredwhen

using the device.

•If there is any uncertainty or controversy, please refer to our final explanation.

Important Safeguards and Warnings

Electrical safety

•All installation and operation should conform to your local electrical safety codes.

•The power source shall conform to the Safety Extra Low Voltage (SELV) standard, and supply power with

rated voltage which conforms to Limited power Source requirement according to IEC60950-1. Please note

that the power supply requirement is subject to the device label.

•Make sure the power supply is correct before operating the device.

•A readily accessible disconnect device shall be incorporated in the building installation wiring.

•Prevent the power cable from being trampled or pressed, especially the plug, power socket and the

junction extruded from the device.

Environment

•Do not aim the device at strong light to focus, such as lamp light and sun light; otherwise, it might cause

over brightness or light marks, which are not the device malfunction, and affect the longevity of

Complementary Metal-Oxide Semiconductor (CMOS).

•Do not place the device in a damp or dusty environment, extremely hot or cold temperatures, or the

locations with strong electromagnetic radiation or unstable lighting.

•Keep the device away from any liquid to avoid damage to the internal components.

•Keep the indoor device away from rain or damp to avoid fire or lightning.

•Keep sound ventilation to avoid heat accumulation.

•Transport, use and store the device within the range of allowed humidity and temperature.

•Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

•Pack the device with standard factory packaging or the equivalent material when transporting thedevice.

•Installthe device in the location where onlythe professional staffwith relevantknowledge ofsafety guards

and warnings can access. The accidental injury might happen to the non-professionals whoenter the

installation area when the device is operating normally.

Operation and Daily Maintenance

•Do not touch the heat dissipation component of the device to avoid scald.

•Carefully follow the instructions in the Guide when performing any disassembly operation about the

device; otherwise, it might cause water leakage or poor image quality due to unprofessional disassemble.

Please contactafter-sale service for desiccant replacement ifthere iscondensed fogfound on the lens after

unpacking or when the desiccant turns green. (Not all models are included with the desiccant).

•It is recommended to use the device together with lightning arrester to improve lightning protection

effect.

•Itis recommendedconnectthe grounding hole to the ground to enhance the reliabilityofthe device.

•Do not touch the image sensor directly (CMOS). Dust and dirt could be removed with air blower, or you

can wipe the lens gently with soft cloth that moistened with alcohol.

•Device body can be cleaned with soft dry cloth, which can also be used to remove stubborn stainswhen

moistened with mild detergent. To avoid possible damage on device body coating which could cause

performance decrease, do not use volatile solvent such as alcohol, benzene, diluentand so on to clean the

device body, nor can strong, abrasive detergent be used.

•Dome cover is an optical component, do not touch or wipe the cover with your hands directly during

installation or operation. For removing dust, grease or fingerprints, wipe gently with moisten oil- free

cotton with diethyl or moisten soft cloth. You can also air blower to remove dust.

•Please strengthen the protection of network, device data and personal information by adopting measures

which include but not limited to using strong password, modifying password regularly, upgrading

firmware to the latest version, and isolating computer network. For some device with old firmware

versions, the ONVIF password will not be modified automatically along with the modification of the

system password, and you need to upgrade the firmware or manually update the ONVIF password.

•Use standard components or accessories provided by manufacturer and make sure the device is installed

and maintained by professional engineers.

•The surface of the image sensor should not be exposed to laser beam radiation in an environmentwhere a

laser beam device is used.

•Do not provide two or more power supply sources for the device unless otherwise specified. A failure to

follow this instruction might cause damage to the device. Regulatory Information

Cybersecurity Recommendations

Cybersecurity is more than just a buzzword: it’s something that pertains to every device that is

connected to theinternet. IPvideo surveillance isnot immune to cyber risks but takingbasic steps

toward protecting and strengthening networks and networked appliances will make them less

susceptible to attacks. Below are some tips and recommendations on how to create a more

secured security system.

Mandatory actions to be taken for basic equipment network security: 1.

Use Strong Passwords

Please refer to the following suggestions to set passwords:

⚫The length should not be less than 8 characters.

⚫Include at least two types of characters; character types include upper- and lower-case

letters, numbers and symbols;

⚫Do not contain the account name or the account name in reverse order.

⚫Do not use continuous characters, such as 123, abc, etc.

⚫Do not use overlapped characters, such as 111, aaa, etc.

2. Update Firmware and Client Software in Time

⚫According to the standard procedure in Tech-industry, we recommend keeping your

equipment (such as NVR, DVR, IP camera, etc.) firmware up to date to ensure the

system is equipped with the latest security patches and fixes. When the equipment is

connected to the public network, it is recommended to enable the “auto-check for

updates” function to obtain timely information of firmware updates released by the

manufacturer.

⚫We suggest that you download and use the latest version of client software.

"Nice to have" recommendations to improve your equipment network security:

1. Physical Protection

We suggest that you perform physical protection to equipment, especially storage devices.

For example, place the equipment in a special computer room and cabinet, and implement

well-done access control permission and key management to prevent unauthorized

personnel from carrying out physical contacts such as damaging hardware, unauthorized

connection of removable equipment (such as USB flash disk, serial port), etc.

2. Change Passwords Regularly

We suggest that you change passwords regularly to reduce the risk of being guessed or

cracked.

3. Set and Update Passwords Reset Information Timely

The equipment supports password reset function. Please set up related information for

password reset in time, including the end user’s mailbox and password protection questions.

If the information changes, please modify it in time. When setting password protection

questions, it is suggested not to use those that can be easily guessed.

4. Enable Account Lock

The account lock feature is enabled by default, and we recommend you keep it on to

guarantee the account security. If an attacker attempts to log in with the wrong password

several times, the corresponding account and the source IP address will be locked.

5. Change Default HTTP and Other Service Ports

We suggest you change default HTTP and other service ports into any set of numbers

between 1024~65535, reducing the risk of outsiders being able to guess which ports youare

using.

III

6. Enable HTTPS

We suggest you to enable HTTPS, so that you visit Web service through a secure

communication channel.

7. Enable Whitelist

We suggest you to enable whitelist function to prevent everyone, except those with specified

IP addresses, from accessing the system. Therefore, please be sure to add your computer’s

IP address and the accompanying equipment’s IP address to the whitelist.

8. MAC Address Binding

We recommend you to bind the IP and MAC address of the gateway to the equipment, thus

reducing the risk of ARP spoofing.

9. Assign Accounts and Privileges Reasonably

According to business and management requirements, reasonably add users and assign a

minimum set of permissions to them.

10. Disable Unnecessary Services and Choose Secure Modes

If not needed, it is recommended to turn off some services such as SNMP, SMTP, UPnP,

etc., to reduce risks.

If necessary, it is highly recommended that you use safe modes, including but not limited to

the following services:

⚫SNMP: Choose SNMP v3 and set up strong encryption passwords and authentication

passwords.

⚫SMTP: Choose TLS to access mailbox server.

⚫FTP: Choose SFTP and set up strong passwords.

⚫AP hotspot: Choose WPA2-PSK encryption mode, and set up strong passwords.

11. Audio and Video Encrypted Transmission

If your audio and video data contents are very important or sensitive, we recommend that

you use encrypted transmission function, to reduce the risk of audio and video data being

stolen during transmission.

Reminder: encrypted transmission will cause some loss in transmission efficiency.

12. Secure Auditing

⚫Check online users: we suggestthat you check onlineusers regularly to see if the device

is logged in without authorization.

⚫Check equipment log: By viewing the logs, you can know the IP addresses that were

used to log in to your devices and their key operations.

13. Network Log

Due to the limited storage capacity of the equipment, the stored log is limited. If you need to

save the log for a long time, it is recommended that you enable the network log function to

ensure that the critical logs are synchronized to the network log server for tracing.

14. Construct a Safe Network Environment

In order to better ensure the safety of equipment and reduce potential cyber risks, we

recommend:

⚫Disable the port mapping function of the router to avoid direct access to the intranet

devices from external network.

⚫The network should be partitioned and isolated according to the actual network needs.

If there are no communication requirements between two sub networks, it is suggested

to use VLAN, network GAP and other technologies to partition the network, so as to

achieve the network isolation effect.

⚫Establish the 802.1x access authentication system to reduce the risk of unauthorized

access to private networks.

⚫It isrecommended that you enable your device's firewall or blacklistand whitelistfeature

to reduce the risk that your device might be attacked.

Table of Contents

Cybersecurity Recommendations............................................................................................................ II

1 Initialization ............................................................................................................................................. 6

2 Login Interface ............................................................................................Error! Bookmark not defined.

2.1 Login...............................................................................................Error! Bookmark not defined.

2.2 Resetting Password........................................................................Error! Bookmark not defined.

3 Main Interface..............................................................................................Error! Bookmark not defined.

4 Local Setting................................................................................................Error! Bookmark not defined.

4.1 Basic...............................................................................................Error! Bookmark not defined.

4.1.1 Device Properties & Events .................................................Error! Bookmark not defined.

4.1.2 Façade Layout (Only for B2B)..............................................Error! Bookmark not defined.

4.2 Video & Audio.................................................................................Error! Bookmark not defined.

4.3 Access Control................................................................................Error! Bookmark not defined.

4.3.1 Local.....................................................................................Error! Bookmark not defined.

4.3.2 RS-485 .................................................................................Error! Bookmark not defined.

4.4 System............................................................................................Error! Bookmark not defined.

4.5 Security...........................................................................................Error! Bookmark not defined.

4.6 Onvif User.......................................................................................Error! Bookmark not defined.

5 Household Setting ......................................................................................Error! Bookmark not defined.

5.1 OUTDOOR UNIT No. Management...............................................Error! Bookmark not defined.

5.1.1 Adding OUTDOOR UNIT.....................................................Error! Bookmark not defined.

5.1.2 Modifying OUTDOOR UNIT Information..............................Error! Bookmark not defined.

5.1.3 Deleting OUTDOOR UNIT...................................................Error! Bookmark not defined.

5.2 Room No. Management .................................................................Error! Bookmark not defined.

5.2.1 Adding Room Number..........................................................Error! Bookmark not defined.

5.2.2 Modifying Room Number......................................................Error! Bookmark not defined.

5.2.3 Issuing Access Card.............................................................Error! Bookmark not defined.

5.3 VTS Management...........................................................................Error! Bookmark not defined.

5.4 Status..............................................................................................Error! Bookmark not defined.

6 Network Setting...........................................................................................Error! Bookmark not defined.

6.1 Basic...............................................................................................Error! Bookmark not defined.

6.1.1 TCP/IP..................................................................................Error! Bookmark not defined.

6.1.2 Port.......................................................................................Error! Bookmark not defined.

6.1.3 HTTPS..................................................................................Error! Bookmark not defined.

6.1.4 InstaOn.................................................................................Error! Bookmark not defined.

6.2 SIP Server.......................................................................................Error! Bookmark not defined.

6.3 Firewall............................................................................................Error! Bookmark not defined.

7 Log Management.........................................................................................Error! Bookmark not defined.

7.1 Call..................................................................................................Error! Bookmark not defined.

7.2 Alarm...............................................................................................Error! Bookmark not defined.

7.3 Unlock.............................................................................................Error! Bookmark not defined.

7.4 Log..................................................................................................Error! Bookmark not defined.

1 Product Overview

1.1 Introduction

A digital VTH is device that can perform monitoring, voice/video call and door unlock.

1.2 Function

Wi-Fi Networking

Connect to Wi-Fi Networks.

Video/Voice Call

Make video or voice call to other VTOs and VTHs

Monitoring

Monitor fence station, VTO and IPC devices (Only supported by certain models)

SOS

Make emergency call to the call centre.

Auto Snapshot

Take snapshots when calling or monitoring and store them in the SD card.

DND (Do not disturb)

Mute all messages and call notifications

Remote Unlock

Unlock doors remotely

Arm and Disarm

Arm and Disarm 6 alarm devices

Playback

Playback video and pictures in the SD card.

Alarm

Alarms will trigger linkage and be sent to the call centre

Record

View call and alarm records

Message

View messages, including videos, pictures and announcement.

Otros manuales de Sistema de intercomunicación de CP Plus

CP Plus

CP Plus CP-PVK-70MTH1 Manual de usuario

CP Plus

CP Plus CP-PVK-70TH Manual de usuario

CP Plus

CP Plus CP-VK40S-VP Hoja de especificaciones

CP Plus

CP Plus CP-VK70S-VP Hoja de especificaciones

CP Plus

CP Plus ORANGE CP-UVK-701A Manual de usuario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario