Costway EP25006US Manual de usuario
印刷技术要求:
1.印刷颜色为黑白,印刷尺寸为143X210mm
2.封面封底为105克双铜（即第一页和最后一页），
内页为80克双胶
3.如果供应商排版需要加空白页，请加在封底之前
4.此页不用印刷
Electric ironing and drying machine
EP25006US
1
Safety precautions
Please read carefully and observe the following "Safety precautions" before using. It is divided into two
aspects: "warning" and “caution”. "Warning" and “caution” are both important aspects of safety and security.
Please do comply with them.
Warning
Improper operation can cause a serious
safety incident.
Caution
Improper operation may cause minor injury to
personnel or impair product performance.
Prohibitions. Peremptory instructions.
Warning
Use power plugs and cords correctly
Please ensure that the marked voltage of the
product matches the local supply voltage and
the power plug matches the socket outlet to
avoid product malfunction or fire.
Please make sure to put the power plug in the
end to avoid electric shock and fire caused by
short circuit
Be sure to hold the power plug when pulling out.
After using, please unplug the power plug to
avoid injury, scald, electric shock and fire
caused by aging of insulation.
Remove
power plug
Be sure to remove the power plug before
cleaning and maintenance.
To avoid electric shock and injury.
In case of any abnormal conditions, please stop
using immediately, cut off the power supply, and
remove the power plug from the power socket.
Abnormal conditions
Burning smell and smoke.
Abnormal heating of power plug and
power cord.
When the power line is moved, it is switched
on and off.
Abnormal shutdown during operation.
Feeling numb and electrocuted when touching it.
Do not plug in or unplug with wet hands.
Do not use damaged power cord, power plug
and loose socket.
When the power cord or socket is broken, it
must be replaced by a professional maintenance
department.
Do not use the product when the power cord is
in a bundle.
It may cause overheat and fire.
Please extend the power cord when using.
Do not damage the power cord.
Do not bend or stretch the power cord by force
or place heavy objects on the power cord.
To avoid fire and electric shock caused by
damaged power cord.
Do not drag the body with the power cord to
avoid damaging the power cord and causing fire.
Do not move the product while it is running
to avoid scalding.
Do not rinse, spray or soak the main engine in
water to avoid fire caused by electric shock or
leakage.
Do not disassemble, repair or modify the product
to avoid fire or electric shock.
Must
Must
Prohibit
Prohibit
Prohibit
Prohibit
Do not insert metal or flammable material to air
inlet or air outlet.
2
To avoid product malfuction and fire due to
abnormal heating.
Please don't use this product on carpet, a sofa,
mattress, and soft flat place.
Make sure there is smooth air flow at the air inlet.
Do not use this product in unstable places.
When product operates, please do not touch
air outlet, aluminum strut and metal objects on
clothes.
After drying, metal objects on clothes are still
at high temperature. They can be touched after
3 minutes of natural cooling.
After drying, air outlet and aluminum strut
are at high temperature.
Please cool down for 3 minutes before touching.
Products with cold air and hot air functions can
also be cooled for 1 minute through the cooling
air function.
Please clean the product after cooling.
Please don’t lean on or sit on the product.
Do not use the product near combustibles
(gasoline, volatile oil, Tianna water, etc.).to
avoid a fire.
Do not dry clothing with poor heat resistance,
such as faux leather clothing, leather shoes, etc.
To avoid damage to clothing
Do not dry clothing with oil stains or solvents
to avoid self-ignition and fire.
Please don’t use this product in small enclosed
spaces such as wardrobes and closets to avoid
overheating.
Please don’t touch the air outlets
when using the product.
Do not dry clothing that does not
adequately wring out.
To avoid electric shock.
It is normal for the machine to make a sound when it
shakes, because there is anti-tipping gravity ball
protection device inside.
When cold and hot air function is switched, a
transition period of about 1 minute is required.
If the clothes model is soiled by clothes or has
residual stains, please wash it before using it, so as
not to stain the clothes when drying.
When used in coastal areas, hot spring areas or
places full of lampblack and other special
environments, the service life of the product may be
relatively shortened.
Warning Precaution for use
Prohibit
Prohibit Prohibit
This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
Please do not cover the air outlet,the shelf must
be more than 10 cm (4”) away from the air outlet
EP25006US 120V 1050W 60Hz 60min
3
Front Side Rear Side
Hanger
Horizontal bar
Strut
Shelf
Air Outlet
Control Knob
Control Knob
（used for cold and warm models）
Air Inlet
Power line cover
Power line
Operation Panel
The effect of drying will be different, due to indoor temperature, humidity,
clothing material, thickness, dry humidity and other external
environmental impact. Please adjust drying time by yourself when you
use the machine.
When this machine is Cold-Warm model, the function of the control
button is cold and hot cycle conversion; when it is only for warm model,
the control button has no function.
Product Parameter:
Product name Model Rated Voltage Power Frequency Control mode Timing
Spare Parts
Hanger
Horizontal bar
Shelf
Elastic clip
Electric ironing
and drying machine Knob
Components
Tips:
Tips:
4
Use
Drying dress and shirts Drying jeans and pants Drying children’s clothes
and shoes
Usage
Drying dress and shirts
1.Loosen the buckle on the strut,
pull the strut to the highest, lock
the buckle on the strut.
2.Install the hanger to the top end of
the strut, secure both ends of the
crossbar to the first section of the
strut, and secure the e to thesh lf
bottom end of the strut.
Caution：The must be more thanshelf
10cm away from the air outlet,
please do not cover.
3.Place the clothes mold on the
product, place the bottom rubber
band on the top of the product slot,
and align the ribbon of the clothes
mold to the center of the product.
4.Put the clothes on the model and
straighten the sleeves and the hem
of the clothes.
Tips:
When the sleeves, collar and hem of
the clothes are uneven, you can use
the elastic clip equipped to stretch.
When drying sleeveless and short-sleeved dresses, you can choose to put the two sleeves of the garment mold into both
sides of the zipper. The monitor of the sleeve can be adjusted according to the actual situation.
2
1
.
②.
Tips:
The slots at both ends of the hanger are
aligned in turn to the end joints on the
support strut.
Push the joints of the support strut outwards until locked.
(Optional)
(Optional)
①. ②.
Shrinks
5
③.
5.Insert the power plug into the power socket. 6.Use the knob to select the appropriate time to start.
Caution:
Please note that due to different clothes types, material and indoor temperature, humidity, drying laundry time is different,
please choose appropriate drying laundry time.
Drying repeatedly if clothes is not dry enough.
Do not dry clothes that are dripping.
When you need to stop, please turn the knob switch to the position of "0".
Do not unplug the power plug directly during operation.
7.After using
Remove the power plug from the
power socket
Tidy up the clothes mold Shrink the strut
Tips:
After use, put it in a ventilated place to avoid odor or mold caused by damp clothes mold.
If the clothes mold is soiled by clothes or there are residual stains,please wash it before using it, so as not to stain the
clothes when drying.
If you do not plan to use it for a long time,remove the mold and clean it to dry it,and shrink the strut to save space.
Storage
①.
②.Tidy up the power cord.
③.Put it in a ventilated place.
6
Drying jeans and pants(Optional)
1.Loosen the buckle on the strut, pull the
lever to the highest, lock the buckle on
the strut.
caution:The shelf must be more than
10cm away from the air outlet, please
do not cover.
2.Put the pants mold on the product, put
the bottom rubber band on the top of the
product slot,and align the ribbon of the
pants mold to the center of the product.
3.Put the pants on the mold.Hold the
pants down at the waist.Stick hook&loop
on the pants mold, and straighten the
pants bottoms up along the bottoms of
the pants mold.
Tips:
When the pants are uneven, you can use
the elastic clip equipped to stretch.
4.Insert the power plug into
the power socket
5.Use the knob to select the
appropriate time to start.
6.After using
Remove the power plug
from the power socket.
Caution:
Please note that due to different clothes types, material and indoor temperature, humidity, drying laundry time is different,
please choose appropriate drying laundry time.
Drying repeatedly if clothes is not dry enough.
Do not dry clothes that are dripping.
When you need to stop, please turn the knob switch to the position of "0".
Do not unplug the power plug directly during operation.
①.Remove the power plug from the power socket.
②.Tidy up the power cord.
③.Put it in a ventilated place.
7
Drying children’s clothes
1.Loosen the buckle on the strut. Pull the first
section of the strut to the highest, and keep the
second and third sections in contraction state.
Lock the buckle on the strut.
2.Install the hanger to the top end of the
strut.Secure the shelf to the bottom end
of the strut.
Caution：The shelf must be more than
10cm away from the air outlet, please do
not cover.
3.Put the clothing mold on the product,
put the bottom rubber band in the top
of the product slot, the clothing mold's
color belt aimed at the product in the
middle.
4.Put the clothes on the model and
straighten the sleeves and the
hem of the clothes.
Tips:
When the sleeves, collar and
hem of the clothes are uneven,
you can use the elastic clip
equipped to stretch.
5.Insert the power plug into the
power socket
6.Use the knob to select the
appropriate time to start.
Cautions are same as
drying adults’ clothes.
Drying shoes
When drying shoes, put the air vent
of the child's garment mold inside the
shoe.
Tips to drying shoes:
Please loosen the shoelace of your
sneakers before drying.
Please wipe the wet shoes with a
dry cloth before drying them.
Cautions:
Please note that due to different shoes types, material
and indoor temperature, humidity, drying laundry time is
different, please choose appropriate drying laundry time.
Leather shoes, rubber shoes cannot be dried with this
product.
Drying repeatedly if clothes is not dry enough .
7.After using
(Optional)
(Optional)
2
1
①.
②.
Tips:
The slots at both ends of the hanger are
aligned in turn to the end joints on the
support strut.
Push the joints of the support strut outwards until locked.
Tabla de contenidos
Otros manuales de Secadora de Costway
Manuales populares de Secadora de otras marcas
Indesit
Indesit IDV 75 Manual de usuario
Infiniton
Infiniton SD-DG85C Manual de usuario
BOMANN
BOMANN WT 5019 Manual de usuario
Alliance Laundry Systems
Alliance Laundry Systems TMB795C Manual de usuario
Asko
Asko T793C Manual de usuario
Kenmore
Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Manual de usuario