Cordes CDNA-041G Manual de usuario
CorDES Proprietary Information
Operator Manual
For the
CDNA-041G
Network Adapter
Rev A
Date: 5/19/2020
CorDES Proprietary Information
2
TABLE OF CONTENTS
Change page summary.................................................................................................4
1Overview..................................................................................................................5
1.1 Reference Documents............................................................................................... 5
1.2 Specifications ............................................................................................................ 5
1.3 Supplied Accessories................................................................................................ 6
1.4 Optional Accessories ................................................................................................ 6
2Operational Concept ..............................................................................................6
3Interfaces and Connections...................................................................................8
3.1 Front Panel................................................................................................................. 8
3.2 Rear Panel.................................................................................................................. 9
4Installation.............................................................................................................10
4.1 Unpacking .................................................................................................................10
4.2 Mounting and Making Connections.........................................................................11
4.3 Power On...................................................................................................................12
4.4 Configuring the ECU Data Interfaces ......................................................................12
5Configuration for Operation.................................................................................13
5.1 Installing and Launching the HMI Application........................................................13
5.2 CDNA-041G Windows Overview..............................................................................13
5.2.1 Main Window.......................................................................................................14
5.2.2 Configuring the Remote Management Interface...................................................14
5.2.3 HMI Network Connection Status to Remote CDNA Device..................................15
5.2.4 Configuring the Remote CDNA............................................................................15
5.2.5 Configuring the Plain Text (PT) and Cipher Text (CT) Interfaces Device Settings17
5.2.6 Configuring the OP Mode and Encrypt Mode.......................................................18
5.2.7 Multicast Configuration ........................................................................................19
5.2.8 Viewing the CDNA Link Status and Packet Statistics...........................................20
5.2.9 Packet Loss & Debug ..........................................................................................21
6Maintenance..........................................................................................................22
6.1 General Care .............................................................................................................22
6.2 Preventive Maintenance...........................................................................................22
7Parts Information..................................................................................................22
8FCC Interference Warning ...................................................................................22
9Warranty Information ...........................................................................................23
9.1 Customer Service .....................................................................................................23
10 Errata..................................................................................................................24
Appendix A. Example TCP/IP Data Interface Configuration....................................25
Appendix B. Example UDP/IP Data Interface Configuration....................................26
Appendix C. Remote Management Application Prgramming Interface..................28
CorDES Proprietary Information
3
Table of Figures
Figure 1 Physical Network Device Stack.................................................................................... 6
Figure 2 Virtual Network Device Stack....................................................................................... 7
Figure 3 CDNA Interfaces with Bypass ...................................................................................... 8
Figure 4 Front View of CDNA-041G........................................................................................... 8
Figure 5: Front Panel with Port Labels of CDNA-041G............................................................... 9
Figure 6 Rear View of CDNA-041G...........................................................................................10
Figure 7 Rear Panel with Port Labels of CDNA-041G...............................................................10
Figure 8 HMI GUI Management Application Overview ..............................................................14
Figure 9 Setting the Host IP Address and TCP Port..................................................................15
Figure 10 Global Device Settings..............................................................................................16
Figure 11 Configuring PT Data Interfaces.................................................................................17
Figure 12 Configuring CT Data Interfaces.................................................................................18
Figure 13 Example GCM OP Mode with Send To Address .......................................................19
Figure 14 Multicast Settings Option...........................................................................................20
Figure 15 HMI Device Status Page...........................................................................................20
Figure 16 UDP/IP w/Fixed 20B Bypass Header Example.........................................................27
Table 3-1 Front Panel Connections............................................................................................ 9
Table 3-2 Rear Panel Connections...........................................................................................10
Table 4-1 CNDA-041G to ECU Connections.............................................................................11
Table 4-2 CDNA-041G Default mapping of Front Panel PHY to Rear Panel Connectors..........12
Table 4-3 ECU Data Interface Settings .....................................................................................13
Table 5-1 Hardware and Software Requirements......................................................................13
Table 5-2 CDNA OP Modes......................................................................................................18
Table 5-3 CDNA Real-Time Information....................................................................................21
CorDES Proprietary Information
4
CHANGE PAGE SUMMARY
REVISION
DATE
CHANGES
-
12/3/2019
Original Release
A
5/19/2020
Update to incorporate UDP fixed bypass mode
& Python Management API scripted interface
CorDES Proprietary Information
5
1OVERVIEW
The CorDES Network Adapter (CDNA-041G) provides network packet to serial translation to
facilitate easy integration of two KIV-7M Gryphon or RTN-14 enabled End Cryptographic Units
(ECUs) into modern Ethernet/IP based satellite control networks. Additionally, the chassis
provides rack mount and redundant auto-failover AC/DC power conversion in a high-availability,
compact 2 RU form factor. The chassis mounts in a standard 19-inch telecommunications rack.
The front panel faceplate is easily removed with five thumb screws allowing the ECUs to slide in
through the front of the chassis for easy installation.
The CDNA-041G provides access to all the ECU data and management interfaces via rear
panel cut outs, for a total of 4 Channels. Redundant hot-swappable autosensing power supplies
provide AC to DC conversion. Two rear panel power supply DC connectors provide the power
connections to the ECU Units.
1.1 Reference Documents
This manual references standards, specifications and other documents. The following
documents are applicable when integrating the ECU int the CDNA-041G and overall satellite
control network.
A. CDNA-041G Data Plane Interface Control Document, Rev 2.0
B. CNDA-041G Application Programming Interface
C. KIV-7M Programmable, Multi-Channel Encryptor, Installation, Configuration and
Operating Instructions
1.2 Specifications
Feature
Description
Data Interfaces
2x Plain Text 1GbE TCP/IP Network Interfaces
2x Cipher Text 1GbE TCP/IP Network Interfaces
(Optical 1000Base-LX or Copper/RJ45)
ECU Crypto Modes
ECB, GCM, CTR
Device Management
10/100/1000 (Base-T) Remote Management
Control/Statistics
ARP/ICMP/DHCP
Static or Dynamic IP per Port
Packet Counters/Statistics per Port
Upgrade
USB Port for future software upgrade support
Physical
2 RU, 19” rack mount
150w Max Power Consumption
Redundant Hot Swap Power supplies
120-230VAC 50-60Hz Auto-Switching Power inputs
0-30C Operating Environment
0-30C MTBF (250KHrs)
CorDES Proprietary Information
6
1.3 Supplied Accessories
The CDNA-041G includes power cables to power the CDNA chassis and two ECUs. The
supplied equipment includes:
Item
Two (2) NEMA 5-15P to IEC-60320-C13 A/C
Power Cords
Two (2) ECU power cables
1.4 Optional Accessories
The user of the CDNA-041G should provide the following items for operation. These items are
available for order as optional accessories at time of purchase.
Item
Part Number
Plain Text (PT) and Cipher Text (CT) data cables
(VHDCI SCSI (SCSI-5) LVD/SE Cable - .8mm 68-
pin VHDCI SCSI Male to Male)
Cables on Demand (CS-VHDCIMX200)
SFP 1000Base-LX Pluggable Optical Module
Finisar FTLF1318P3BTL (Digi-Key 775-1082-ND)
SFP 1000Base-T Pluggable Copper Module
FCLF8520P2BTL (Digi-Key 775-1140-ND)
2OPERATIONAL CONCEPT
The CDNA-041G is designed to support simple integration of the ECUs into a modern satellite
ground system with Gigabit Ethernet interfaces. The CDNA converts the ECU serial interfaces
to TCP/IP to facilitate networking. Figure 1 shows the notional integration of the CDNA in a
physical network, while Figure 2 shows the notional integration of the CDNA is a virtualized
environment.
Figure 1 Physical Network Device Stack
CorDES Proprietary Information
7
Figure 2 Virtual Network Device Stack
A CDNA Dataplane Application Programming Interface (API) is available to support CDNA
compatible packet generation as defined in the CDNA-041G Data Plane Interface Control
Document. A customized CDNA header or fixed bypass header (described in Reference A)
enables packet level header bypass (Figure 3). The header also enables ECU key and
cryptographic mode agility in a future release.
CorDES Proprietary Information
8
Figure 3 CDNA Interfaces with Bypass
3INTERFACES AND CONNECTIONS
3.1 Front Panel
The front panel of the CDNA (Figure 4 and Figure 5) contains the power switch, indicators and
connections to configure the unit for operation. Table 3-1 lists and describes functions of the
connections on the front panel.
Figure 4 Front View of CDNA-041G
CorDES Proprietary Information
9
Figure 5: Front Panel with Port Labels of CDNA-041G
Connection
Name
Connector
Function
ON/OFF
N/A
Enables and disables prime power to the unit. Integrated
LED provided visual indication of power
Remote
Management
RJ-45 Plug
10/100 (Base-T) Remote management interface port to
remotely configure the CNDA-041G
PT[0], PT[1]
SFP Transceiver
Plain Text (Unencrypted) 1GbE data channels supporting
IPv4/TCP or IPv4/UDP connection
CT[0], CT[1]
SFP Transceiver
Cipher Text (Encrypted) 1GbE data channels supporting
IPv4/TCP or IPv4/UDP connection
USB Management
USB 2.0 A
Female
Interface to provide future software and firmware updates
Table 3-1 Front Panel Connections
3.2 Rear Panel
The rear panel (Figure 6 and Figure 7) provides power connectivity and data connections to the
ECUs installed in CDNA. Table 3-2 lists and describes functions of the connections on the real
panel.
CorDES Proprietary Information
10
Figure 6 Rear View of CDNA-041G
Figure 7 Rear Panel with Port Labels of CDNA-041G
Connection
Name
Connector
Function
AC Power
NEMA5-15P
120-230VAC 50-60Hz Auto-Switching Power inputs
ECU[0] / [1]
Power
L17DM537446
5.25VDC power output to ECUs
PT[0-3]
VHDCI plug, Molex
71425 or equivalent
Serial Plain Text data inputs and outputs for ECUs
CT[0-3]
VHDCI plug, Molex
71425 or equivalent
Serial Cipher Text data inputs and outputs for ECUs
Table 3-2 Rear Panel Connections
4INSTALLATION
The CDNA-041G is designed to be installed in fixed satellite operation centers that meet the
environmental characteristics specified in the Technical Specifications of this manual.
4.1 Unpacking
The CDNA-041G is shipped in reusable packaging materials. Save these packaging materials
for future use in case you need to ship the CDNA-041G. Save this document along with the
packaging materials for future reference. The CDNA-041G is shipped in a single box which
contains the chassis, faceplate and power cables.
Tabla de contenidos
Manuales populares de Tarjeta de red de otras marcas
3Com
3Com EtherLink 3C509B Manual de usuario
TRENDnet
TRENDnet TEG-PCITX Manual de usuario
Cisco
Cisco MC16E Manual de usuario
Delta Electronics
Delta Electronics Braking Modules VFDB Series Manual de usuario
TwinMOS
TwinMOS Booming Manual de usuario
Dialogic
Dialogic Media Board DM/V1200BTEPEQ Manual de usuario
Buffalo
Buffalo AirStation WLI-PCM-L11GP Manual de usuario
National Instruments
National Instruments NI 9234 Manual de usuario
Hama
Hama 49276 Manual de usuario
Linksys
Linksys WCF54G - Wireless-G Compact Flash Card Manual de operación
Compaq
Compaq Wireless LAN 100 Manual de usuario
Bose
Bose PowerMatch Dante Manual de usuario