Convision CC-5308 Manual de usuario
Manual CC 5308 1
Manual
CC-5308
Date: January 2011 Convision Systems GmbH
Manual CC 5308 2
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than those specified.
Do NOT expose this appliance to rain or moisture.
This Installation should be made by a qualified service person and should confirm to all local codes.
Manual CC 5308 3
Warning
The camera requires periodic inspection.
Contact an authorised technician to carry out the inspection.
Stop using your camera when you find it malfunctioning.
If the camera emits smoke or is unusually hot for a long period, a fire may be caused.
Do not install the camera on a surface that can not support it.
If the camera is installed on an inappropriate surface, it may fall and cause injury.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not dis-assemble the camera.
It may result in an electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in a fire or other hazards.
Manual CC 5308 4
Contents
NOTICE 5
Important Safeguard 5
Precautions 5
Features 6
Components 7
Names and Functions of Parts 7
Dimensions 8
Installation 9
Cable Connections 10
Camera Operation 10
Menu Configuration 10
Settings 11
LENS (selection) 12
Exposure 13
WHITE BALANCE 14
SSDR (Super Dynamic Range) 15
BACKLIGHT 15
DNR3 (Super Noise Reduction) 17
Day / Night 17
SPECIAL 18
EXIT 21
Troubleshooting 22
Specifications 23
Manual CC 5308 5
NOTICE
Important Safeguard
1. Read Instructions
Read all of the safety and operating instructions before using the product.
2. Retain Instructions
Save these instructions for future reference.
3. Attachments / Accessories
Do not use attachments or accessories unless recommended by the appliance manufacturer as they
may cause hazards, damage product and void warranty.
4. Water and Moisture
Do not use this product near water or moisture.
5. Installation
Do not place or mount this product in or on an unstable or improperly supported location. Improperly
installed product may fall, causing serious injury to a child or adult, and damage to the product. Use only
with a mounting device recommended by the manufacturer, or sold with the product. To insure proper
mounting, follow the manufacturer's instructions and use only mounting accessories recommended by
manufacturer.
6. Power source
This product should be operated only from the type of power source indicated on the marking label.
Precautions
■Operating
-Before using, make sure power supply and others are properly connected.
-While operating, if any abnormal condition or malfunction is observed, stop using the camera
immediately and then contact your local dealer.
■Handling
-Do not disassemble or tamper with parts inside the camera.
-Do not drop or subject the camera to shock and vibration as this can damage camera.
-Care must be taken when you clean the clear dome cover. Especially, scratch and dust will ruin your
quality of camera.
■Installation and Storage
-Do not install the camera in areas of extreme temperature, which exceed the allowable range.
-Avoid installing in humid or dusty places.
-Avoid installing in places where radiation is present.
-Avoid installing in places where there are strong magnetic fields and electric signals.
-Avoid installing in places where the camera would be subject to strong vibrations.
-Never expose the camera to rain and water.
Manual CC 5308 6
Features
Ultra High Resolution
By adopting a diagonal 6mm (1/3”) 410,000
(NTSC) pixel, 470,000 (PAL) pixels SONY
CCD, the camera procedures clear picture
quality with a horizontal resolution of 600
TV lines for color.
Excellent Sensitivity
The built-in high sensitivity COLOR CCD
enable a clear image even in 0,15 Lux
(Color), 0,01 Lux (B/W) or lower
illumination.
DNR3 (Super Noise Reduction)
The high-performance W-V DSP chip
effectively removes low-light gain noise and
afterimage to provide clear images even in
dark environments.
Filter Changeable Day & Night
This camera has a function that
automatically selects the mode that is
appropriate for daytime or night-time
conditions. The COLOR mode operates in
daytime conditions to provide optimum
colors and BW mode operates in night time
conditions to enhance the definition of the
image.
Motion Detection
Since the camera detects motion without
any additional external sensor, you can
monitor activity more efficient.
SSDR (Super Dynamic Range)
For images with high contrast between
bright and dark spots from difficult lighting
conditions such as backlighting, this
camera selectively illuminates darker spots
while retaining the same light level for
brighter spots to even out the overall
brightness.
DIS (Digital Image Stabilizer)
The DIS function compensates for any
camera movement, to produce more stable
pictures.
RS-485 Communication Control Support
Remote OSD menu control via an RS-485
interface is supported.
OSD
The camera control is convenient by using
8 different foreign languages O.S.D.
-NTSC: Korean, English, French, Spanish,
Japanese, Portuguese
-PAL: English, French, German, Spanish,
Italian, Chinese, Russian, Czech, Polish
3 Axis built-in Vandal Resistant Dome
Housing
Miscellaneous Functions
HLC (High Light Compensation), SENS-
UP, FLIP (H/V-REV), D-ZOOM,
SHARPNESS, MOTION DETECTION and
PRIVACY functions are provided.
Weather Proof (IP66)
Manual CC 5308 7
Components
1. Color Dome Camera
2. Screws
3. Wrench
4. Wire for VBS-Extra
5. Instruction Guide
Names and Functions of Parts
1. LENS: Vario-Focal DC Auto Iris Lens
2. OSD PCB
Manual CC 5308 8
●SET button: Used for the menu display. This button can be used to confirm settings after
changing the value of the selected function or current conditions.
●UP & DOWN buttons: Used for selecting items by moving the cursor up or down on the menu
screen.
●LEFT & RIGHT buttons: Used when changing item values, by moving the cursor to the left
or right on the menu screen.
3. VBS-EXTRA for connecting to LCD
Please use the supplied wire when connecting to LCD
4. SMPS PCB for dual power
5. 3 AXIS bracket
Please loosen screws and fix tilted and panned position.
Dimensions
Manual CC 5308 9
Installation
1. Dome Base Mounting
- Open the dome cover by loosening 3 screws using special wrench provided.
- Mount the base of camera to a sturdy surface using 4 screws (1.5 inch) and 4 premade holes
on the base of the dome.
2. Power Connect & Monitor Impedance
- DC12V/300mA regulated power supply (DC12V only) AC24V Class 2 power supply
(AC24V/DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
- Set the monitor impedance switch to 75Ω. Check the impedance switch if the screen is blurred.
3. Camera Module Adjustment
- Loosen screws for 3-axis camera bracket and adjust the direction and angle of camera.
- Make sure to retighten the screws for camera bracket.
- Set any function you wish to activate by using the OSD buttons.
4. Dome Cover Mounting
- Replace the dome cover to the base and tighten 3 screws.
Manual CC 5308 10
Cable Connections
Control via RS-485 Interface (Optional)
The camera can be controlled by using external controllers like a Remote controller.
(RS-485 Communication)
• To control using a DVR or System Controller
Connect the RS-485 cable (TRX+, TRX-) to the connection port of the 485
control board that is connected to the DVR or System Controller.
485 Control Board Connection Port RS-485 Control Port
(+) CONNECTION TERMINAL (TRX+) 485+
(- ) CONNECTION TERMINAL (TRX -) 485-
Note
• To control the camera by constructing an additional controller, use Pelco-D protocol.
(Go Preset 95: Enters into OSD menu or Set key function)
Camera Operation
Menu Configuration
Main Setup Menu
LENS DC MANUAL
Exposure BRIGHTNESS SHUTTER AGC
SENS-UP RETURN
White Balance ATW AWC Manual
Outdoor Indoor
SSDR OFF ON
Backlight OFF HLC BLC
DNR3 OFF ON
Day & Night AUTO COLOR B/W EXTERN
Special IMAGE ADJ. MONITOR CAM TITLE
SYNC MOTION DET PRIVACY
COMM ADJ LANGUAGE RETURN
Exit SAVE NOT SAVE RESET
Tabla de contenidos
Otros manuales de Cámara de seguridad de Convision
Convision
Convision CC-5304 IR Manual de usuario
Convision
Convision CC-7130 Manual de usuario
Convision
Convision CC-5451 IR Manual de usuario
Convision
Convision CC-8xxx Series Manual de usuario
Convision
Convision CC-5351 DIR Manual de usuario
Convision
Convision CC-5501-E Manual de usuario
Convision
Convision CC-6601-B Manual de usuario
Convision
Convision CC-5307 Manual de usuario
Convision
Convision CC-5400 Manual de usuario
Convision
Convision CC-6601-A Manual de usuario
