Conviron CMP6010 Manual de usuario

USER MANUAL

Software Version 1.12

CMP6010

257249R04

CMP6010

USER MANUAL

Published by:

CONVIRON

590 Berry Street

Winnipeg, Manitoba

Canada R3H 0R9

www.conviron.com

January 2016

Printed in Canada.

Conviron is a registered trademark of Controlled Environments Limited. All other trademarks are the property of their respective owners.

Information subject to change without written notice.

PLEASE READ THESE INSTRUCTIONS

CAREFULLY AND COMPLETELY

BEFORE OPERATING.

January 2016 | 256573R04 i

CONVIRON SERVICE AND TECHNICAL SUPPORT

Conviron welcomes the opportunity to provide assistance and to answer any technical questions related to

the start-up, use and troubleshooting of the CMP6010 control system. If you are having a problem using

your CMP6010, please ensure you have read this CMP6010 User Manual in its entirety for information

about the feature(s) with which you are experiencing trouble.

If the problem persists and/or you require additional assistance, please collect the following

information prior to contacting Conviron:

• The serial number of the chamber which is located on the rating plate on the side of the

chamber

• The software version number of the CMP6010 controller, which is located in the Help

screens. To access the Help screens, press the < > and < > hard keys at the same time

from the any of the three Status screens (temperature, humidity, or light)

• A description of the problem

• A description of what you were doing before the problem occurred.

Head ofce

Technical Services

Conviron

590 Berry St.

Winnipeg, Manitoba,

Canada R3H 0R9

Conviron Technical Services

North America Europe

Toll free +1.800.363.6451 +44.(0).800.032.6422

Telephone +1.204.786.6451 +44.(0).1638.781.731

Fax +1.204.786.7736 +44.1638.741.112

Email [email protected] service@conviron.eu

January 2016 | 256573R04 iii

TABLE OF CONTENTS

PREFACE.................................................................................................................xi

PRECAUTIONS ......................................................................................................13

1.0 CONTROLLER NAVIGATION .......................................................................1-1

1.1 User Interface ............................................................................................................................ 1-1

1.2 Button Functions ...................................................................................................................... 1-1

1.3 Menu Map ................................................................................................................................. 1-2

2.0 STATUS SCREENS.........................................................................................2-1

3.0 PROGRAM MENU ........................................................................................3-1

3.1 Introduction to Programs ........................................................................................................3-1

3.2 Creating a Program..................................................................................................................3-2

3.3 Editing a Program.....................................................................................................................3-4

3.4 Deleting a Program.................................................................................................................. 3-6

4.0 SCHEDULE MENU........................................................................................4-1

4.1 Introduction to the Schedule..................................................................................................4-1

4.2 Schedule Hierarchy ..................................................................................................................4-2

4.3 Creating or Editing the Schedule........................................................................................... 4-3

4.4 Running the Schedule..............................................................................................................4-5

5.0 SECURITY MENU..........................................................................................5-1

5.1 Logging In ................................................................................................................................. 5-1

5.2 Logging Out..............................................................................................................................5-3

5.3 Changing a Password ..............................................................................................................5-4

6.0 ALARM MENU ..............................................................................................6-1

6.1 Changing Alarm Settings ........................................................................................................ 6-1

6.2 Viewing Alarm History.............................................................................................................. 6-1

6.3 Clearing Alarm History............................................................................................................. 6-2

Janaury 2016 |256573R04

7.0 ALARM TROUBLESHOOTING......................................................................7-1

7.1 Alarm State Indication .............................................................................................................7-1

7.2 Alarm Types............................................................................................................................... 7-2

7.2.1 Viewing and Acknowledging an Alarm........................................................... 7-2

7.2.2 Temperature Alarm: High Limit Exceeded (chamber: off)............................ 7-2

7.2.3 Temperature Alarm: Low Limit Exceeded (chamber: off)............................. 7-3

7.2.4 Humidity Alarm: High Limit Exceeded (chamber: on)................................... 7-3

7.2.5 Humidity Alarm: Low Limit Exceeded (chamber: on).................................... 7-4

7.2.6 Low Water Level (chamber: on,humidication system: off).......................... 7-4

7.2.7 Door Open (chamber: on,humidication system: off).................................. 7-4

7.2.8 High Pressure Alarm: Warning (chamber: on)................................................ 7-5

7.2.9 High Pressure Alarm: Repeat (chamber: off).................................................. 7-5

7.2.10 High Pressure Alarm: Time (chamber: off)...................................................... 7-5

7.2.11 Low Pressure Alarm: Warning (chamber: on)................................................. 7-6

7.2.12 Low Pressure Alarm: Repeat (chamber: off)................................................... 7-6

7.2.13 Low Pressure Alarm: Time (chamber: off)....................................................... 7-6

8.0 OPTIONS MENU...........................................................................................8-1

8.1 Setting Time/Date.................................................................................................................... 8-1

8.2 Setting On-Delay...................................................................................................................... 8-1

8.3 Enabling and Disabling Security ............................................................................................8-2

8.3.1 Enabling Security .............................................................................................. 8-2

8.3.2 Disabling Security ............................................................................................. 8-2

8.4 Setting Light Level and Input Offset......................................................................................8-3

8.4.1 Setting Number of Discrete Light Levels........................................................ 8-3

8.4.2 Setting Input Offset .......................................................................................... 8-4

8.5 Conguring Network Communication..................................................................................8-5

8.5.1 Inputting Network Communication Settings.................................................. 8-5

8.5.2 Connecting the Controller to a Network (LAN) ............................................. 8-6

8.5.3 Connecting the Controller to a Single Computer ......................................... 8-7

January 2016 | 256573R04 v

9.0 SERVICE MENU ............................................................................................9-1

9.1 I/O Status................................................................................................................................... 9-1

9.1.1 Accessing and Manipulating I/O Status Screens ........................................... 9-1

9.1.2 Controller Analog Inputs.................................................................................. 9-2

9.1.3 Controller Analog Outputs .............................................................................. 9-2

9.1.4 Controller Digital Inputs................................................................................... 9-3

9.1.5 Controller Digital Outputs ............................................................................... 9-4

9.2 System........................................................................................................................................ 9-6

9.3 PID Sets...................................................................................................................................... 9-7

9.4 Cong......................................................................................................................................... 9-8

9.4.1 Temperature Process Conguration............................................................... 9-8

9.4.2 Humidity Process Conguration...................................................................... 9-8

9.4.3 Carbon Dioxide Monitoring Conguration .................................................... 9-9

9.4.4 Alarm Type Conguration................................................................................ 9-9

9.5 Reset User................................................................................................................................9-10

10.0 GLOSSARY................................................................................................10-1