Converters.TV 948 Manual de usuario

HDMI HD Wireless Transmitter

& Receiver System - ID# 948

Operation Manual

Introduction

Wireless HD AV Transmitter & Receiver Kits run at 5GHz operation

frequency to deliver uncompressed HD video audio 20 meters open field

and 10 meters through wall with hidden antenna. This device kits make

wireless connection by using WHDI Technology from HD Media Source

Devices such as HD Disc Player, PC, Game Console, Settop Box to Display

Device for example LCD, Plasma or LED TV, Projector... while keep wire-

equivalent quality and no latency

Features

•The Wireless HD AV Transmitter & Receiver Kit allows you to stream

your HD contents wirelessly from HD media devices to your

television.

•It is ideal when your media player is located in your living room,

while you want to watch your Full HD movies on your LCD, Plasma

or LED television in your bedroom. You can just install the

Wireless HD Transmitter and Receiver Kit and let the air do the

work. Furthermore, you can operate the media player with the

original remote control in your bedroom.

•Up to four different HD media devices such as HD media player,

Blue-ray player, Settop Box and game Console can be connected to

the transmitter unit via enclosed 4port HDMI switch. You can select

one video source to be sent wirelessly to the television which

connected with the receiver unit. And you can also choose

another video source and display it on the TV which connected

with the output port on the switch unit with an HDMI cable (Note:

Only one HDMI cable is included in the package).

•Support HDMI 1.3 video format and HDCP 1.2 with video

encryption.

•Support video resolution up to 1080p (30fps 60fps)

Operation Controls

and Functions

Transmitter

Image 1

1. IR: Connect with IR Out port (9 in Image 3) of the HDMI Switch.

Note: If you are not using enclosed HDMI Switch, you can only connect

one HD Media Device with the Transmitter unit: Please connect the IR

port with enclosed Infrared Eye Cable and place the IR flasher close to

the IR sensor of the Media Device. Then you can control the Media

Device by using its remote control at the Wireless Receiver side.

2. HDMI IN: Connect with HDMI Out B port (10 in Image 3) of the

HDMI Switch. Note: If you are not using enclosed HDMI Switch, please

connect this port with your HD Media Device by HDMI Cable directly.

Connect to the HDMI equipped source equipment such as DVD or Blu-

ray player.

10 LAN 1/2/3

The LAN connections can e used to connect and share up to 6

ethernet connections (3 at the receiver end, 3 at the transmitter end),

including computers, routers and media servers.

Connection

3. DC IN: Connect with DC Power port (11 in Image 3) of the HDMI

Switch.

Note: If you are not using enclosed HDMI Switch, please connect this port

with enclosed power supply (DC 5V Power Adapter).

1 . ON OFF Switch: Power on off the Wireless Transmitter unit.

2 . Wireless Link Indicator: Indicate that the wireless connection is linked

up.

3 . Video Signal Indicator: Indicate that the video signal connection is

linked up.

4 Power Indicator: Indicate when the Wireless Transmitter Unit is

powered on.

5 Future use.

Receiver

Image 2

1 HDMI OUT: Connect with a Display Device (e.g. LCD, Plasma or LED

TV) via HDMI cable.

Note:

The display device should have an HDMI IN port.

2 DC IN: Connect with the power supply (enclosed DC 5V Power

Adapter).

3 ON/OFF Switch: Power on off the Wireless Receiver unit.

4 Video Signal Indicato : Indicate that the video signal connection is

linked up.

5 Wi eless Link Indicato : Indicate that the wireless connection is linked

up.

6 Powe Indicato : Indicate when the Wireless Receiver Unit is powered

on.

7 IR Senso : IR sensor for receiving IR signal from the Remote Control of

your HD media device.

8 Future use.

Matrix 4 In 2 Out HDMI Switch

Image 3

1. HDMI IN 1: Connect with HD Media Device via HDMI Cable.

2. HDMI IN 2: Connect with HD Media Device via HDMI Cable.

3. HDMI IN 3: Connect with HD Media Device via HDMI Cable.

4. HDMI IN 4: Connect with HD Media Device via HDMI Cable.

5. HDMI OUT A: Connect with Display Device directly via an HDMI Cable. It

can output any Media Source from the HD Media Devices connected with

the 4 HDMI IN ports of the switch.

6. ON OFF Switch: Power on off the HDMI Switch.

7. A Channel Selection Button: Press the button to switch the media source

from HDMI IN 1 to HDMI IN 4 manually. The selected media source will be

output from the HDMI OUT A port.

8. B Channel Selection Button: Press the button to switch the media source

from HDMI IN 1 to HDMI IN 4 manually. The selected media source will be

sent to the Display Device connected with the Receiver unit wirelessly.

9. IR Out: Connect with the IR port on the Wireless Transmitter unit.

10. HDMI OUT B: Connect with the HDMI IN port on the VVireless

Transmitter unit.

11. DC Power: Connect with the DC IN port on the Wreless Transmitter

unit.

12. IR Remote Sensor: Work with enclosed remote control for media

source selection.

13. A Channel Indicator: Indicate selected media input source for HDMI

OUT A output.

14. B Channel Indicator: Indicate selected media input source for HDMI

OUT B output.

15. DC IN: Connect with the power supply (enclosed DC 5V Power Adapter).

16. I : Connect wit IR Extender Box. User can control up to 4 HD Media

Devices by using t eir original remote control at t e Wireless Receiver side.

Please find detailed connection guide of t e IR Extender Box in t e c apter

below.

emote

1.A-1 Select HDMI IN 1 device. Connect HDMI IN

1 to HDMI OUTA Channel.

2.A-2 Select HDMI IN 2 device. Connect HDMI IN 2 to

HDMI OUT A Channel.

3.A-3 Select HDMI IN 3 device. Connect HDMI IN 3 to

HDMI OUT A Channel.

4.A-4 Select HDMI IN 4 device. Connect HDMI IN

4 to HDMI OUTA Channel.

5.B-1 Select HDMI IN 1 device. Connect HDMI IN 1 to

HDMI OUT B Channel.

6. B-2 Select HDMI IN 2 device. Connect HDMI IN 2 to

HDMI OUT B Channel.

7. B-3 Select HDMI IN 3 device. Connect HDMI IN 3 to

HDMI OUT B Channel.

8. B-4 Select HDMI IN 4 device. Connect HDMI IN 4 to

HDMI OUT B Channel.

IR Extender Box

Note: You only need to use the IR Extender Box when you use the Transmitter unit with the HDMI

Switch.

1-4. IR: Connect up to 4 HD media devices with enclosed IR extension

cables. Place the IR flasher on the extension cables close to the IR

receivers of the media devices.

5. DC IN: Connect with the power supply (enclosed DC 5V Power

Adapter).

6. Link Indicator: Indicate IR signal connection.

7. Power Indicator: Indicate when the extension box is powered on.

8. IR Plug: Connect with IR port on the Switch (16 in Image 3)

Image 6

Installation Diagram for Matrix Display

How to install the Transmitter unit:

•You can connect up to 4 HD media devices with the Wireless Transmitter unit

via the HDMI Switch.

•Plug the HDMI Switch to the Transmitter unit and place them near your

HD media devices.

•Connect your HD media devices with the HDMI Switch via HDMI Cables.

•Connect IR Extender Box with your HD media devices via enclosed IR

Extension Cables. Please place the IR flasher on the extension cables close

to the IR receivers of your HD media devices.

•Connect the IR Extender Box with the IR port on the Switch.

•You can connect one display device (Display A) with the Switch via the HD

OUT port. It can show video source from HD IN 1 to HD IN 4.

How to install the Receiver unit:

•Place the Receiver unit near your display device (Display B).

•Connect the HDMI cable to the 'HD OUT' port of the Receiver unit.

•Connect the other side of the HDMI cable to the HDMI connection of

your display device (Display B).

•Now connect the power supply of both the Transmitter and Receiver unit

to a wall outlet and to the 'DC IN' connection of the Transmitter and

Receiver unit.

Standard Package

Image 7

Installation Diagram for Single Display

How to install the Transmitter unit:

•Place the Transmitter unit near your HD media device.

•Connect the Infrared Eye Extension Cable to the 'IR' port on the

Transmitter unit.

•Place the IR flasher near the IR receiver of the HD media devices.

•Connect the HDMI cable to the 'HD IN' connection of the

Transmitter unit.

•Connect the other side of the HDMI cable to your HD media

device.

How to install the Receiver unit:

•Place the Receiver unit near your display device.

•Connect the HDMI cable to the 'HD OUT' port of the Receiver unit.

•Connect the other side of the HDMI cable to the HDMI connection

of your display device.

•Now connect the power supply of both the Transmitter and Receiver

unit to a wall outlet and to the 'DC IN' connection of the Transmitter

and Receiver unit.

Using Wireless HD AV Kit

The Wireless HD Transmitter & Receiver Kit has now been setup. You can

enjoy the full potential of wireless Full HD streaming!

Make sure all devices have been started. Bear in mind that starting the

Transmitter & Receiver Kit can take up to 12 minutes.

Use enclosed remote control to select the video source from HD IN 1 to

HD IN 4 to display on Display A. You can also use the remote control to

select the video source for showing on Display B.

Please make sure you have chosen the right video channel on your display

device. If correct, the screen or main menu of the media device will be

shown between 5 to 10 seconds when change media source.

You can control the media device with its original remote control at the

Receiver side.

Tabla de contenidos

Otros manuales de Transmisor de Converters.TV

Converters.TV

Converters.TV 15135 Manual de usuario

Converters.TV

Converters.TV 542 Manual de usuario

Converters.TV

Converters.TV 15496/7 Manual de usuario

Converters.TV

Converters.TV CH-1107TX Manual de usuario

Converters.TV

Converters.TV 549 Manual de usuario

Converters.TV

Converters.TV 15222 Manual de usuario

Converters.TV

Converters.TV 15125 Manual de usuario

Converters.TV

Converters.TV 722 Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario