Contex SD One+ Manual de usuario

June 2018

SD One+/MF Work Instruction

Tools required:

T10 screwdriver

T20 screwdriver

Prerequisite

Disconnect power from the scanner.

Re-positioning the Lid Sensor

1. Follow this procedure if the Lid

Sensor is not working correctly

and it is visibly not central in the

chassis.

2. Depress the latch levers at both

ends of the scanner.

NOTE: This work flow is exactly the same for the SD

One+ and the SD One MF, unless otherwise indicated.

3. Raise the CIS Bridge Unit.

4. Remove screws (3 x T20) in both

ends of the CIS bridge.

5. Open the CIS Bridge.

X

SD One + Technical Instructions 2

SD One+ Version

6. Remove 3 x T10 screws.

7. Lift the Controller Board up as

much as possible without

damaging any cables.

(NOTE: There is no need to remove any

cables for this procedure)

8. Remove the 2 x T10 screws from

the sensor bracket.

SD One MF version

1. Remove 2 x T10 screws.

2. Lift the Sensor Bracket out from

the chassis.

SD One + Technical Instructions 3

9. Lift the sensor bracket and check

for the correct.

10. The brackets should have the

sides parallel to each other.

11. Carefully press the side together

until they are parallel.

12. Do not press so hard so as to

distort the bracket too much.

13. When the bracket is correct, refit

into the chassis, and refit the 2 x

T10 screws.

Correct Incorrect

SD One + Technical Instructions 4

14. (SD One +) Refit the Controller

Board into the retaining clips,

and replace the 3 x T10 screws.

15. Close the CIS Bridge.

16. Refit the 3 x T20 screws at both

ends of the CIS Bridge.

17. Close the CIS Bridge down.

Otros manuales para SD One+

1

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Escáner de Contex

Contex

Contex SD One MF 44 Manual de usuario

Contex

Contex HD Ultra X Series Guía

Contex

Contex AB51A Manual

Contex

Contex IQ 4400 Series Manual de usuario

Contex

Contex IQ Quattro X Series Manual de usuario

Contex

Contex GX67D Manual

Contex

Contex GX67D Manual

Contex

Contex IQ 2400 Series Cómo utilizar

Contex

Contex HD5450 Manual de usuario

Contex

Contex IQ FLEX Cómo utilizar

Contex

Contex SD 3600 series Manual de usuario

Contex

Contex SD One+ Cómo utilizar

Contex

Contex FSS4300 Manual

Contex

Contex AA51A Manual

Contex

Contex HD iFLEX Manual de usuario

Contex

Contex SD One MF Instrucciones de montaje

Contex

Contex XD2490 Manual de usuario

Contex

Contex FLEX50i Manual de usuario

Contex

Contex Wide Format Color Manual

Contex

Contex HD Ultra Series Manual de usuario

Contex

Contex IQ FLEX Manual de usuario

Contex

Contex SD One 36 Manual de usuario

Contex

Contex HD Ultra X 6000 Series Manual de usuario

Contex

Contex XD2490 Manual de usuario

Manuales populares de Escáner de otras marcas

Plustek

Plustek Scanner Manual de usuario

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manual de usuario

Renkforce

Renkforce DS100-5M Manual de usuario

Image Access

Image Access WideTEK A2 Manual de usuario

Canon

Canon imageFORMULA CR-120N Manual de usuario

Fujitsu

Fujitsu FI-4860C2 Manual de usuario

GeoSlam

GeoSlam ZEB Horizon Instrucciones de instalación

Kodak

Kodak i5800 Scanner Manual de usuario

Kodak

Kodak i7300 Manual de usuario

Revopoint

Revopoint POP Manual de usuario

Fujitsu

Fujitsu fi-4860C Manual de usuario

Eddyfi Technologies

Eddyfi Technologies Floormap X Manual de usuario

Faselase

Faselase F6 Manual de usuario

Fujitsu

Fujitsu CardMinder Manual de usuario

Uniden

Uniden BC340CRS Manual de usuario

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manual de usuario

Mustek

Mustek PageExpress 4800 Pro Manual de usuario

Optex

Optex 750830 Manual de usuario