Contec PIO-16/16L(PM) Manual de usuario

Ver.3.11

PIO-16/16L(PM) 1

PC Card-compliant Opto-Isolated Digital I/O

PIO-16/16L(PM)

PIO-16/16L(PM) is a PC Card Standard compliant product for

input/output of digital signals. Users can use the card in PC

card slots that support the PCMCIA2.1/JEIDA4.2 or later.

The PC can be used to input the on/off state of a switch and to

control a relay.

The PC card can input and output up to 16 channels.

With the included Driver library [API-PAC(W32)], users can

configure Windows application software for this PC card in your

favorite programming language supporting Win32 API functions,

such as Visual Basic or Visual C/C++.

- Individual external power supplies can be used for each common pin as it is shared by 16 signal points.

- The PC card slot side and the I/O interface are isolated from each other by an opto-coupler, offering good noise immunity.

- Users can use all of the input signals as interrupt inputs and select the interrupt trigger edge of the input signal.

- The PC card has a digital filter feature to prevent noise or chatter from causing erroneous inputs.

- Up to 35VDC, 100mA per signal, max. output.

- The output transistor has a surge absorber connected to protect the PC card from surge voltages.

ScrewTerminal :EPD-37A *1

ScrewTerminal :EPD-37 *1

Termination Panel (M3) :DTP-3(PC)

TerminationPanel :DTP-4(PC)

Signal Monitor for Digital I/O:CM-32(PC)E *1

*1 A PCB37PS or PCB37PS optional cable is required separately.

* Check the CONTEC Web site for more information on these options.

Flat Cable with a 37-Pin D-type Connectors on 2Ends:

PCB37P-1.5(1.5m), PCB37P-3 (3m), PCB37P-5 (5m)

Shielded cable with two 37-pin D-Type connectors:

PCB37PS-0.5P(0.5m), PCB37PS-1.5P (1.5m), PCB37PS-3P (3m),

PCB37PS-5P (5m)

Flat Cable with a 37-pin D-type Connector:

PCA37P-1.5 (1.5m), PCA37P-3 (3m), PCA37P-5 (5m)

Shielded Cable withTwo 37-pin D-Type Connectors:

PCA37PS-0.5P (0.5m), PCA37PS-1.5P (1.5m), PCA37PS-3P (3m)

PCA37PS-5P (5m)

D-SUB37P Male Connector Set (5 Pieces):

CN5-D37M

- PC Card [PIO-16/16L(PM)] …1

- Cable with isolation unit[PIO-16/16L(PM)-BOX and CB-PM68/37] …1

- User’s Guide…1

- CD-ROM [API-PAC(W32)] …1

CD-ROM

[API-PAC(W32)]

PC card

Guide

Cable with isolation unit

Drive Library [API-PAC]: Included

Accessories Components in your package

Features

Optional Cable & Connector

Ver.3.11

PIO-16/16L(PM) 2

Physical dimension

85.6mm 1.0m

54.0mm

5.0mm 9.0mm 24.0mm

Connection cable Isolation circuit boxPC card

77.0mm

87.0mm

Driver Software Package API-PAC(W32) (Included)

API-PAC(W32) is the library software that provides the commands for

CONTEC hardware products in the form of Windows standard Win32 API

functions (DLL). It makes it easy to create high-speed application

software taking advantage of the CONTEC hardware using various

programming languages that support Win32 API functions, such as

Visual Basic and Visual C++.

It can also be used by the installed diagnosis program to check hardware

operations.

CONTEC provides download services (at http://www.contec.com/apipac/)

tosupply the updated drivers and differential files.

For details, read Help on the bundled CD-ROM or visit the CONTEC Web

site.

< Operating environment >

OS: Windows XP, Server 2003, 2000, Me, 98, etc..

Language: Visual C++ .NET, Visual C# .NET, Visual Basic .NET, Visual

C++, Visual Basic, Delphi, C++Builder, etc..

Item Specification

PC card

Card slot

specifications PCMCIA 2.1/JEIDA 4.2 or later 16bit PC card

Card size *1 PCMCIA/JEIDA TYPE II

Input

Input format Opto-isolated input (Compatible with current

sink output)(Negative logic )

Number of

input signal channels 16 channels (all available for interrupts) (1

common pin)

Input resistance 3kΩ

Input ON current 3.4mA or more

Input OFF current 0.16mA or less

Interrupt 16 interrupt input signals are arranged into a

single output of interrupt signal INTA.

An interrupt is generated at the rising edge

(HIGH-to-LOW transition) or falling edge

(LOW-to-HIGH transition).

Response time 1msec within

Output

Output format Opto-isolated open collector output (current

sink type) (Negative logic)

Number of

Output signal

channels

16 channels (1 common)

Output

voltage 35VDC (Max.)Output

Output

current 100mA(par channel) (Max. )

Residual voltage with

output on 0.5V or less (Output current≤50mA), 1.0V or

less (Output current≤100mA)

Surge protector Surge absorber (Ishizuka Electronics

Corporation) or equivalent

Response time 1 msec within

Common

I/O address 8 bit x 16 port boundary (common to inputs

and outputs)

Interruption level 1 level use

Dielectric strength 1000Vrms

External circuit power

supply 12 to 24VDC(±10%)

Power consumption 5VDC 200mA (Max.)

Operating condition 0 to 50°C, 10 to 90%RH (No condensation)

llowable distance of

signal extension Approx. 50 m (depending on wiring

environment)

Dimension Refer to PC card Dimensions

Weight 500g(Total weight of PC card, connection

cable, isolation circuit box)

Supported Software

Package contents

Ver.3.11

PIO-16/16L(PM) 3

To connect an external device to this PC card, plug the cable from the device into the interface connector [37pin D-SUB(female)]shown below.

Interface connector

- Connector used

37-pin D-SUB, female connector

DCLC-J37SAF-20L9(mfd. by JAE)

Thumb screw : UNC#4-40(inch screw)

- Applicable connectors

17JE-23370-02(D8C) (mfd. by DDK, Male)

FDCD-37P (mfd. by HIROSE, Male)

DC-37P-N (mfd. by JAE, Male)

Pin Assignments of Interface Connector

+0 port

(Input)

+1 port

(Input)

+2 port

(Output)

+3 port

(Output)

Common plus pin for

+0/+1 input ports

Common plus pin for

+2/+3 output ports

Common minus pin for

+2/+3 output ports

N.C.

I-17

I-16

I-15

I-14

I-13

I-12

I-11

I-10

I-07

I-06

I-05

I-04

I-03

I-02

I-01

I-00

O-37

O-36

O-35

O-34

O-33

O-32

O-31

O-30

O-27

O-26

O-25

O-24

O-23

O-22

O-21

O-20

PIO-16/16L(PM) can be connected the input signals to a device which can be current-driven, such as a switch or transistor output device.

The connection requires an external power supply to feed currents.

The PC card inputs the ON/OFF state of the current-driven device as a digital value.

Input Circuit

External circuit

3kΩ

Vcc

Optocoupler

Optocoupler Input

Input

Plus

common External

power supply

12V to 24VDC

Input

contact

Input

contact

PIO-16/16L(PM)

The signal inputs are isolated by opto-couplers (ready to accept current sinking output signals). The PC card therefore requires an external power

supply to drive the inputs. The power requirement for each input pin is about 8 mA at 24 VDC (about 4 mA at 12 VDC).

Connecting a Switch

Input plus common (CN1 : 18 pin)

I-00 (CN1 : 2 pin)

External

power supply

12 to 24VDC

PIO-16/16L(PM) side

When the switch is ON, the corresponding bit contains 1.

When the switch is OFF, by contrast, the bit contains 0.

Connector Wiring

Input Signals Connecting

Ver.3.11

PIO-16/16L(PM) 4

Connect the output signals to a current-driven controlled device such as a

relay or LED.

The connection requires an external power supply to feed currents.

The PC card controls turning on/off the current-driven controlled device

using a digital value.

Output Circuit External circuit

Plus

common

Output

10kΩ

External

power supply

12V to 24VDC

Minuscommon

Output

Vcc

Load

Optocoupler

Surge

absorter

Surge

absorter

PIO-16/16L(PM)

The signal output section is an opto-coupler isolated, open-collector

output (current sink type). Driving the output section requires an

external power supply.

The rated output current per channel is 100 mA at maximum.

The output section can also be connected to a TTL level input as it uses a

low-saturated transistor for output. The residual voltage (low-level

voltage) between the collector and emitter with the output on is 0.5 V or

less at an output current within 50 mA or at most 1.0 V at an output

current within 100 mA. As for the output transistor, the serge absorber is

connected for protection from serge voltage.

CAUTION

When the PC is turned on, all outputs are reset to OFF.

Connection to the LED

O-20 (CN1 : 21 pin) LED

5.1kΩ

Output plus common (CN1 : 37 pin)

PIO-16/16L(PM) side

Output minus common (CN1 : 20 pin)

External

power supply

12 to 24VDC

When "1" is output to a relevant bit, the corresponding LED comes on.

When "0" is output to the bit, in contrast, the LED goes out.

Example of Connection to TTLLevel Input

Output plus common

Output

Output minus common

TTL level input

VCC

Input board

GND

2kΩ

External

power supply

12 to 24VDC

Connecting the Sink Type Output and Sink Output Support Input

The following example shows a connection between a sink type output

(output board(PC card)) and a sink output support input (input board(PC

card)). Refer to this connection example when you connect such PC

cards to each other.

Output board

Output plus common

Output (sink type)

Output minus common

Input (Sink output acceptable)

Input plus common

Input board

External

power supply

12 to 24VDC

Input Port 0

(8 points, Group 0)

Input Port 1

(8 points, Group 1)

Output Port 0

(8 points, Group 2)

Output Port 1

(8 points, Group 3)

Interrupt

Control

Circuit

Control

Circuits

PIO-16/16L(PM)

PC card slot

Optocoupler

transistor

Optocoupler

transistor

*Price, specification, color and design of the products may be

changed without notice.

Output Signals Connecting Sink Type Output & Sink Output support

Block Diagram

Otros manuales de Hardware de computadora de Contec

Contec

Contec AO-1616L-LPE Manual de usuario

Contec

Contec DIO-32DM-PE Manual de usuario

Contec

Contec CONPROSYS CPS-PC341MB-ADSC1-9201 Manual de usuario

Contec

Contec bx200 SERIES Manual de usuario

Contec

Contec DI-64T-PE Manual de usuario

Contec

Contec PCI-bus Analog Input Multi-Function Board... Manual de usuario

Contec

Contec AIO-121602LN-USB Manual de usuario

Contec

Contec Flexlan PC Card FX-DS-110 Manual de usuario

Contec

Contec BX710 Series Manual de usuario

Contec

Contec COM-1(PM) Manual de usuario

Contec

Contec AD12-8(PM) Manual de usuario

Contec

Contec GP-IB(CB)F Manual de usuario

Contec

Contec DIO-32DM3-PE Manual de usuario

Contec

Contec CNT32-4MT Manual de usuario

Contec

Contec PO-32L(PC)V Manual de usuario

Contec

Contec GP-IB(PCI)F, GP-IB(PCI)FL, GP-IB(LPCI)F,... Manual de usuario

Contec

Contec CONPROSYS Linux SDK Manual de usuario

Contec

Contec AO-1608L-LPE Manual de usuario

Contec

Contec GP-IB-PCI Manual de usuario

Contec

Contec DIO-6464T2-PCI Manual de usuario

Contec

Contec CNT24-4(PCI)H Manual de usuario

Contec

Contec CONPROSYS Manual de referencia

Contec

Contec CNT-3204MT-LPE Manual de usuario

Contec

Contec CONPROSYS CPS-PCS341MB-DS1-1201 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario