Conrad Electronic FS20 FMS Manual de usuario
Version 12/06
OPERATING INSTRUCTIONS
Load monitor „FS20 FMS“
Item no. 62 30 20
50 seconds /5
Preselection "Positive" flank mode
Preselection threshold value mode
Preselection adress code mode
Preselection house code mode
Preselection "negative" flank mode
Operating mode
Set-up mode
"Positive" flank mode "Negative" flank mode
Power-on command, timer function,
then power-off
Timer funct., then power-on command,
but only if the master is still active
Hours entry
Timer-Mode
Tens of minutes entry
Minutes entry
Timer funct., then power-on command
Power-off command
Power-on command
no command
House code mode
Factory setting
Digit 1 Value 1 /1
Value 2 /2
1 hour /1
Value 4 /4
Value 3 /3
Value 3 /3
Value 4 /4
Value 2 /2
Value 1 /1Digit 2
Digit 8 Value 1 /1
Value 2 /2
Value 4 /4
Value 3 /3
Adress code mode
Digit 1Value 1 /1
Value 2 /2
Value 4 /4
Value 3 /3
Value 3 /3
Value 4 /4
Value 2 /2
Value 1 /1Digit 2
Digit 4Value 1 /1
Value 2 /2
Value 4 /4
Value 3 /3
2 hours /2
3 hours /3
4 hours /4
10 minutes/1
1 minutes/1
Tens of seconds entry
Seconds entry
Threshold value mode
Press the button for at least 5 seconds
Briefly press button
Press the button for at least 2 seconds
Press the button for at least 12 seconds
Continue automatically
Saving the setting
/5
/6
/4
/3
/2
/1
0 hours /-
2 minutes/2
9 minutes/9
0 minutes/-
20 minutes/2
50 minutes/5
0 minutes/-
10 seconds /1
20 seconds /2
0 seconds /-
1 second /1
2 seconds /2
9 seconds /9
0 seconds /-
Automatic measurement
Level 1 /1
Level 7 /7No level
/1
/2
/3
/4
/5
/ * periodic blinking of LED (* = number of blinks)
>2
>2
>2
>2
>2
>2
>2
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>2
>2
>2
>2
>2
>2
>2
>2
>2
>5
>5
>5
>5
>5
>5
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>5
>2
>2
>2
>2
>2
>5
>5
>5
>5
>5
>5
>5
>2
>2
>2
>2
>2
>2
>2
>2
>2
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>2
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>5
>12
>12
>2
>2
>2
>2
>5
>12
Item no. 62 30 20
Item no. 62 30 23
2
Introduction
Dear customer,
Thank you for purchasing this product.
This product meets the requirements of both current national and
European guidelines.
Please read the user manual completely and observe the safety and
operation instructions before using the product!
This user manual belongs to this product. It contains important
information specific to its operation and handling. Please bear
this in mind when passing on the product to a third party.
Therefore keep this user manual for future reference!
All company and product names contained herein are trademarks of
their respective owners. All rights reserved.
For more inquiries, contact or consult our technical service:
Germany: Tel. no.: +49 9604 / 40 88 80
Fax. no.: +49 9604 / 40 88 48
e-mail: [email protected]
Mon. to Thur. 8.00am to 4.30pm
Fri. 8.00am to 2.00pm
3
Table of contents
Page
1. Prescribed use ................................................................................. 4
2. Scope of delivery ............................................................................. 4
3. Explanation of icons ......................................................................... 5
4. Safety instructions ........................................................................... 6
5. Description of functions ................................................................... 8
6. Control panel .................................................................................... 9
7. Initial operation ............................................................................... 10
8. Operation/basic function ................................................................ 11
a) Addressing the receiver .......................................................... 12
b) Manual switching ..................................................................... 12
c) Switching via the master device ............................................. 12
9. Programming .................................................................................. 13
a) Example ‘turning on the slave when the master is turned off’ .. 14
b) Setting the commands ............................................................. 16
1. Setting the ‘positive flank mode’ ........................................ 16
2. Setting the ‘negative flank mode’ ...................................... 16
3. Setting the ‘command mode’ ............................................. 17
4. Setting the timer duration (‘timer mode’) .......................... 20
c) Setting the threshold value ..................................................... 22
10. Restoring the factory settings ....................................................... 24
11. FS20 address system basics ........................................................ 25
12. Example of an address assignment ............................................. 27
13. Handling ......................................................................................... 29
14. Maintenance and cleaning ............................................................ 30
15. Disposal .......................................................................................... 31
16. Information on the range ............................................................... 31
17. Declaration of conformity (DOC) .................................................. 32
18. Technical specifications ................................................................ 33
4
1. Prescribed use
The ‘FS20 FMS’ load monitor functions exclusively in conjunction with the
FS20 wireless control system.
The ‘FS20 FMS’ registers when a connected electric consumer load
(master, 230V~/50Hz, load current max. 16A) is turned on or off and, with
this information, controls any number of switching receivers in the FS20
system.
Additional functions are described in detail in section 5.
Any use other than the one described above may damage the
product and cause other dangers.
Readtheseoperatinginstructionsthoroughlyandcarefully,as
they contain a great deal of important information for the
operation and handling.
2. Scope of delivery
• Load monitor ‘FS20 FMS’
• User manual
• Flowchart for programming
5
3. Explanation of icons
The icon with a lightning flash in a triangle is used to alert you
to potential personal injury hazards such as electric shock.
The icon with an exclamation mark in a triangle points to
important instructions in this user manual that must be ob-
served.
The ‘hand’ symbol indicates special tips and information on
operation.
6
4. Safety instructions
The product’s guarantee becomes invalid if the product is
damaged as a result of failure to observe these operating
instructions.Wedonotassumeanyliabilityforany result-
ing damages!
Nor do we assume liability for damage to property or
personal injury caused by improper use or failure to ob-
serve the safety instructions. In such cases the product’s
guarantee becomes invalid!
• For safety and licensing (CE) reasons any unauthorised alterations to
and/or modification of the product are not permitted.
• Do not use this product in hospitals or medical institutions. Although the
product emits only relatively weak radio signals, these may cause life-
support systems to malfunction. This may also be the case in other
areas.
• The product is designed in accordance with protection class I. The only
voltage source that may be used is that of the correct power socket-
outlet (230V~/50Hz) with the protective earth conductor of the public
power supply system.
• The product is not a toy and should be kept out of the reach of children.
Therefore take particular care when children are around!
• Make sure the product does not become damp or wet; it is only suitable
for use in dry indoor locations (not bathrooms or similar). Otherwise
there is the risk of a life-threatening electric shock!
• Protect the product against heat, cold, and direct sunlight while in
storage or operation.
• Never dismantle the product! There is danger of a fatal electric shock!
7
• Do not leave packaging material lying around. This may become a
dangerous plaything in the hands of children.
• The accident-prevention regulations, established by the Employer’s
Liability Insurance Association for electrical equipment and facilities,
must be adhered to in commercial facilities.
• Consult a skilled technician if you have doubts about the mode of
operation, safety or connection of the device.
• Handle the product with care; knocks, blows or even a fall from a low
height can damage it.
8
5. Description of functions
The‘FS20FMS’loadmonitor registerswhen aconnected electricconsumer
load (master) is turned on or off and, with this information, remotely controls
any number of switching receivers in the FS20 system, for example, an
‘FS20 ST’ wireless switch socket.
The switching direction can be selected. With the factory settings the ‘FS20
FMS’ transmits a power-on command when the connected consumer is
switched on and a power-off command when it is switched off.
Theoppositefunctioncanbeprogrammed(power-oncommand
when the consumer is turned off and power-off command
when it is turned on).
The triggering threshold can be adjusted in 7 steps, allowing consumer
loads to be monitored that consume power while in standby mode.
Due to the integration in the FS20 address and coding system, the data
transfer within the FS20 wireless control system is very secure and several
neighbouringsystems can be operated simultaneously (for instance, ifyour
neighbour uses the same system).
The ‘FS20 FMS’ can be operated using any conventional earthed socket
(230V~/50Hz). A consumer load with or without contact protection can be
plugged into the socket of the ‘FS20 FMS’. The consumer load can have a
maximum power consumption of up to (depending on the earthed socket!)
3680VA (230V~/16A).
The ‘FS20 FMS’ is operated and programmed using the button on its front
side, the status and program messages are displayed with an LED.
9
6. Control panel
Button with integrated LED
Socket for consumer loads
(230V~/50Hz, max. 16A)
On the back side there is an earthed plug that must be plugged into a socket
of the public power supply system (230V~/50Hz).
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Transmisor de Conrad Electronic
Manuales populares de Transmisor de otras marcas
Dejero
Dejero EnGo 3x Manual de usuario
Rosemount
Rosemount 4600 Manual de usuario
Speaka Professional
Speaka Professional 2342740 Manual de usuario
trubomat
trubomat GAB 1000 Manual de usuario
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manual de usuario
Rondish
Rondish UT-11 Manual de usuario
