Connected Inventions AirWits PM R2.1 Manual de usuario

AirWits PM R2.1

User manual

Contents

Using this manual 3

Read me ﬁrst 3

About the device 5

Functions 5

Assembling and Installation 5

Replacing batteries 8

Uplink: Payload description 9

Downlink 10

Downlink: Payload description 11

Troubleshooting 12

Technical speciﬁcations 14

Appendix 1. Downlink messages table 16

Using this manual

Thank you for choosing this Connected Inventions device. This device will provide you high-

quality IoT with Connected Inventions’ exceptional technology and high standards. This

manual has been specially designed to guide you through the functions and features of your

device.

Read me ﬁrst

• Before using your device, read the entire manual and all safety instructions to ensure safe

and proper use.

• The descriptions in this manual are based on the default settings of your device.

• The images used in this manual may diﬀer from the actual product.

• The contents of this manual may diﬀer from software provided by service providers or

carriers, and are subject to change without prior notice.

• Access the Connected Inventions website (www.connectedinventions.com) for the latest

version of the manual.

• Available features and additional services may vary by service provider.

• Applications on this device may perform diﬀerently from comparable applications and

may not include all functions available (by ie. downlink messaging features)

• Connected Inventions is not liable for performance issues caused by third-party

applications or improper installation.

• Please keep this manual for future reference.

• Maintenance

• In case of malfunction, deliver the device to the supplier. Do not open the cover.

• Transportation

• Do not remove packing material and do not repack the device unless necessary. Contact the

shipping agent before transportation. Inside the device there is a battery which contains

approximately 1.8 g of lithium.

•Disposal

• Return the device to a disposal station which collects electronics waste and batteries.

• Operation

• Protect the device from moist, water, and dirt.

PM1.0 = 12

PM2.5 = 6

PM10 = 30

Temperature = 21.3

Humidity = 34

Request Downlink =

TRUE

Reconﬁgure = TRUE

Power Control = FALSE

Update interval = 30min

Reconﬁgure = FALSE

Power Control = FALSE

Update interval = —

…

~24h

30min

PM1.0 = 15

PM2.5 = 8

PM10 = 44

Temperature = 22.3

Humidity = 52

Request Downlink =

FALSE

PM1.0 = 14

PM2.5 = 7

PM10 = 21

Temperature = 21.8

Humidity = 50

Request Downlink =

TRUE

About the device

Connected Inventions AirWits PM is a wireless air quality metering device with

ultra long battery life. This intelligent and small device measures and sends the

particular matter mass concentrations PM1.0, PM 2.5 and PM10 as ug/m3 plus

temperature and humidity data sequentially from 10 min to 24 hours using the

world-wide Sigfox IoT-network connectivity for data transmission, enabling very

low lifetime cost. The installation of the device is extremely simple procedure

and requires neither special tools nor conﬁguration operation. The device is

maintenance free, and thus a great solution especially for long term indoor air

quality metering providing accurate data for energy savings and comfortable

living conditions which can be monitored remotely.

Functions

The basic functionality procedure example:

Diagram 1. Example of messages being sent and received

When the device is powered on, it will send the measurements and ask

downlink message from the network. If the downlink message is

conﬁgured and reconﬁgure bit is 1, new settings will be adopted. In case

downlink message is not conﬁgured, the reconﬁgure bit is 0 or the downlink

message cannot be read, the previous settings will remain. The transmission

interval time and adaptive power control function can be set through downlink

message. After the downlink request, the device sends only uplink messages for

next 24 hours. After every 24 hours, the device will send downlink request again

within next payload transmission.

Assembling and Installation

• Save the identiﬁer and the key of the device. The identiﬁer and the PAC key is

on the label on the bottom of the device. You can also read the identiﬁer and

the PAC key using the QR code.

Picture 1. Bottom label.

• Switch the device on sliding the power switch to position “1”

Picture 2. Slide the power switch to position “1”.

• Install the wall plate to the wall using screws suitable for the wall material.

Please note the orientation!

Picture 3. Install the wall plate with appropriate screws.

•Attach the device to the wall having the pins meeting installation holes in the

device. Please note the orientation!

Picture 4. Attach the device to the wall plate.

Please note! Avoid placing device closer than 15cm on any metal or

magnetic object, electric cables, electric devices or selective glass as

this will dramatically reduce radio performance as well as battery life of

the device.

Replacing batteries

• The device battery pack is proprietary made. Once device runs out of battery,

please contact your local partner or Connected Inventions for support the

battery pack replacement. Do not try to replace the battery pack with other

brands available as there is a risk of breaking the device. The battery pack lasts

years in normal use so in case of no messages received from the device,

please check ﬁrst the power is switched on and the Sigfox radio coverage is

available at the location.

Uplink: Payload description

Example

UL Message: 0x2C026F34005e010f00b5

BYTE

BIT

TYPE

NAME

DESCRIPTION

0-1

UInt2

Reserved

Boolean

Transmit power

Full power mode. 1= TRUE, 0 = FALSE

Boolean

Power Control

Active power control. 1= On, 0 = OFF

4-7

UInt4

FW version

1-2

0-15

UInt16

Temperature

(Value /10) - 40 = Temperature [°C]

(Value /18) - 8 = Temperature [°F]

0-7

UInt8

Humidity

Humidity [%]

4-5

0-15

UInt16

PM1.0

Mass concentration [ug/m3]

6-7

0-15

UInt16

PM2.5

Mass concentration [ug/m3]

8-9

0-15

UInt16

PM10

Mass concentration [ug/m3]

0x2C = 00101100Bin

Full power = TRUE

Active power control = On

FW Version = 2

Header

0x026F = 623Dec ->

(623/10)-40 = 22,3 °C

Temperature

0x34 = 52Dec ->

52%

Humidity

0x005e = 94Dec ->

94 ug/m3

PM1.0

0x010f = 271Dec ->

271 ug/m3

PM2.5

0x00b5 = 181Dec ->

181 ug/m3

PM10

Downlink

• Settings of the device can be updated with the downlink message

• Device requests new settings approximately every 24 hours

• You must be very careful when you update the settings

• settings aﬀect both the subscription and the battery life of the device!

• Downlink message is optional

• If any downlink message is not received, device continues with the current settings

• How often messages are sent can be adjusted with the settings

•Default settings when device has not been conﬁgured with downlink:

•Uplink reporting period is 30minutes

•#Adaptive Power Control is OFF

•#Full transmit power is used

•If the Adaptive power control feature is set on, the device will automatically adjust

the transmit power to optimum level to save battery and create less unnecessary

interference to radio network

•By default power control is OFF

•When power control is OFF, full TX power is used

•NOTE! The Adaptive power control feature only available in RCZ1 device

Tabla de contenidos

Otros manuales de Instrumento de medición de Connected Inventions

Connected Inventions

Connected Inventions AirWits CO2 Manual de usuario

Connected Inventions

Connected Inventions AirWits CO2 Manual de usuario

Connected Inventions

Connected Inventions Connected AirWits RCZ1 Manual de usuario

Connected Inventions

Connected Inventions AirWits R4.1 Manual de usuario

Connected Inventions

Connected Inventions Connected AirWits IAQ Manual de usuario

Connected Inventions

Connected Inventions AirWits IAQ R1.1 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario