CompuLab UTILITE2 Manual de usuario
Utilite2
User’s Guide
2 December 2014
Contents
Contents........................................................... 2
Package Contents.......................................... 4
Utilite2 Features.............................................. 5
Utilite2 Overview............................................. 6
Front View ................................................. 6
Rear View................................................... 6
Getting started with Utilite2........................... 7
Connecting a display.................................. 7
Connecting keyboard and mouse.............. 7
Connecting power ..................................... 7
Turning on the system............................... 7
System login .............................................. 8
Using Utilite2................................................... 9
December 2014 3
Power button............................................. 9
Power LED.................................................. 9
Audio ......................................................... 9
Debug console ......................................... 10
Utilite2 Maintenance..................................... 11
Opening bottom cover ............................ 11
Utilite2 service area................................. 12
Micro-USB mux setting............................ 12
mSATA socket.......................................... 13
Expansion socket ..................................... 13
Utilite2 Software............................................ 14
General .................................................... 14
System recovery ...................................... 14
4 December 2014
Package Contents
Utilite2 computer
12V DC power supply unit
Power supply AC blade
2x WiFi antenna
User’s guide
December 2014 5
Utilite2 Features
CPU
Qualcomm® Snapdragon™ 600 @1.7GHz
RAM
2GB DDR3
Storage
eMMC 4GB
32GB SSD (*)
Display
HDMI 1.4 up to 1920 x 1080
LAN
1000 BaseT Ethernet port
WiFi
802.11b/g/n
Bluetooth
Bluetooth 4.0
Audio
Stereo line-out, line-in
USB
Four USB 2.0 480Mbps
USB OTG
SD
Micro-SD socket, SDXC
Serial
Serial debug console via USB connector
Power
12V DC
(*) Optional feature. Availability depends on Utilite2 model
configuration.
6 December 2014
Utilite2 Overview
Front View
Rear View
December 2014 7
Getting started with Utilite2
Connecting a display
Connect the display to the Utilite2 HDMI display output using a
standard HDMI cable.
Connecting keyboard and mouse
Connect USB mouse and keyboard devices to the Utilite2 USB
connectors.
Connecting power
Insert the AC power-supply blade into the power supply
unit.
Insert the power supply plug into the Utilite2 12V DC
power jack. Turn the power plug clock-wise to lock the
plug.
Turning on the system
Plug the power supply unit into an AC outlet.
Utilite2 will turn on and boot.
8 December 2014
System login
Log into the O/S using the following user details:
Username: utilite
Password: 111111
For root access please use the following credentials:
Username: root
Password: 111111
December 2014 9
Using Utilite2
Power button
Utilite2 power button controls the system power state. Pressing
the button for more than 15 seconds, shuts down the system.
Power LED
Utilite2 power LED indicates the system power state. When the
system is active, the LED is green. When the system is shut
down, the LED is orange.
Audio
Standard stereo 3.5mm audio cables should be used to
connect the Utilite2 analog line-out and line-in with external
audio devices.
10 December 2014
Debug console
Utilite2 provides an optional debug console interface. The
debug console is multiplexed with the USB OTG interface on
the front-panel micro-USB connector. The multiplexing setting
is controlled by a dedicated, user-accessible jumper. When the
jumper is open (default factory setting), USB OTG is routed to
the micro-USB connector. When the jumper is closed, the
debug console is routed to the connector. To enable debug
console mode, please follow the instructions in the
“Maintenance” section of this document. The debug console is
implemented as a serial-over-USB interface. Connect the
Utilite2 micro-USB connector to a host PC USB port with a
standard micro-USB cable. The debug interface should be
detected as a standard COM port device.
Tabla de contenidos
Otros manuales de De oficina de CompuLab
CompuLab
CompuLab FIT-PC4 Manual de usuario
CompuLab
CompuLab Fitlet2 FC-POED Manual de usuario
CompuLab
CompuLab fitlet2 FC-USB Manual de usuario
CompuLab
CompuLab Airtop-C0 Manual de usuario
CompuLab
CompuLab IPC2 Manual de usuario
CompuLab
CompuLab fit-PC2 Manual de usuario
CompuLab
CompuLab Fitlet FC-OPLN Manual de usuario
CompuLab
CompuLab fit-PC2i Manual de usuario
CompuLab
CompuLab Trim-Slice Manual de usuario
CompuLab
CompuLab fitlet2 FC-USB Manual de usuario
CompuLab
CompuLab fitlet3 Manual de usuario
CompuLab
CompuLab fitlet2 FC-USB Manual de usuario
CompuLab
CompuLab SBC-FITPC3 Manual de usuario
CompuLab
CompuLab Tensor-I22 Manual de usuario
CompuLab
CompuLab Airtop Manual de usuario
CompuLab
CompuLab IPC3 Manual de usuario
CompuLab
CompuLab fitlet Manual de usuario
CompuLab
CompuLab Fitlet-H Manual de usuario
CompuLab
CompuLab Airtop3 Manual de usuario
CompuLab
CompuLab Airtop2 Manual de usuario
