Compaq V55 Manual de usuario

Writer: Marianne Silvetti Saved By: Marianne Silvetti Saved Date: 10/10/97 10:50 AM

Pages: 1 Words: 180 Template: c:\msoffice\templates\commnoti.dot

File Name ANotice.doc Part Number 308012-001

308012-001

Notice

The information in this guide is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE

FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS

CONTAINED HEREIN; NOR FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE

FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.

This guide contains information protected by copyright. No part of this

guide may be photocopied or reproduced in any form without prior

written consent from Compaq Computer Corporation.

1997 Compaq Computer Corporation.

Compaq, Deskpro, and QVision are registered in the U. S. Patent and

Trademark Office.

Microsoft, MS-DOS, Windows, Windows NT, and other names of

Microsoft products referenced herein are trademarks or registered

trademarks of Microsoft Corporation.

Product names mentioned herein may be trademarks and/or registered

trademarks of their respective companies.

The software described in this guide is furnished under a license

agreement or nondisclosure agreement. The software may be used or

copied only in accordance with the terms of the agreement.

User’s Guide

Compaq V55 Color Monitor

First Edition (November 1997)

Part Number 308012-001

Compaq Computer Corporation

English 1-1

Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 4:36 PM

Pages: 14 Words: 2440 Template: c:\msoffice\templates\working\comm.dot

File Name BCH1_EN.doc Part Number 308012-001

book1

ENGLISH

Introduction The Compaq V55 Color Monitor is a microprocessor-based,

intelligent scanning monitor that automatically locks in on the

most common display modes. This monitor operates most

efficiently when used with a Compaq compatible graphics

controller.

Product Features The monitor features include the following:

■ 15-inch CRT with a 13.7-inch (34.7 cm) diagonal viewable

image size

■ Easy-to-access front panel controls

■ Universal Serial Bus (USB) pass-through connectors for use

with USB peripherals (mouse, etc.)

1-2 English

Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 4:36 PM

Pages: 14 Words: 2440 Template: c:\msoffice\templates\working\comm.dot

File Name BCH1_EN.doc Part Number 308012-001

■ Plug and play capability if supported by your system

■ Tilt control (image rotation) functionality

■ Automatically scans all horizontal frequencies from 30 to

60 kHz and vertical frequencies from 47.5 to 125 Hz

■ Supports VGA, Super VGA, and 1024 × 768 resolutions

■ Energy Saver feature, when activated, results in a power

savings of greater than 90 percent

■ Macintosh-compatible timing with optional connector

■ Compliant with the following regulated specifications:

❏ Swedish MPR II 1990

❏ EPA Energy Star

❏ European Union CE Directives

❏ Swedish TCO 1995 on select models

Graphics Driver

Compaq has created a Universal Driver Manager (UDM)

release that supports all Compaq QVision graphics controllers

and most graphics controllers found on Compaq Deskpro

products. The UDM eases graphics driver deployment across all

Compaq Deskpro platforms ensuring cross-compatibility and

backward-compatibility. The resulting solution enables

customers to manage and control ongoing software maintenance

costs. The UDM is available on the Support Software CD for

Compaq Desktop, Portable, and Workstation Products and the

Compaq World Wide Web site (www.compaq.com).

✎If the updated Universal Driver Manager that supports the

Compaq monitor is not available on the Web site, contact your

authorized Compaq dealer or reseller.

■ You can order the Support Software CD for Compaq

Desktop, Portable, and Workstation Products. This compact

disc contains the latest device drivers, utilities, and

flashable ROM images needed to run MS-DOS, Microsoft

Windows 3.1, Windows 95, Windows NT Workstation, and

IBM OS/2 on your Compaq commercial Desktop, Portable,

or Workstation product.

■ You can download the Support software from the Compaq

World Wide Web site (www.compaq.com).

English 1-3

Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 4:36 PM

Pages: 14 Words: 2440 Template: c:\msoffice\templates\working\comm.dot

File Name BCH1_EN.doc Part Number 308012-001

■ You can purchase backup diskettes from your Compaq

authorized reseller, dealer or service provider.

If you choose to purchase the Support Software CD, you have

two options:

■ You can purchase a single CD-ROM that gives you one-

time access to the latest support software (North America

only, Compaq part number 272505-001).

■ You can purchase a yearly subscription that delivers up to

12 monthly CD-ROMs (Compaq part number 183426-xxx).

The annual subscription ensures your continuous access to the

latest developments.

For help and service outside of the U.S. and Canada or to order

the CD or backup diskettes, contact your Compaq authorized

reseller, dealer, or service provider. For a list of Compaq

Customer Support worldwide telephone numbers, refer to

book 8, Contacting Compaq Customer Support.

✎If you call Compaq to place an order, be sure to have the serial

number of your monitor available. The serial number is

located on the front base of your monitor. This number is

necessary for all purchases.

1-4 English

Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 4:36 PM

Pages: 14 Words: 2440 Template: c:\msoffice\templates\working\comm.dot

File Name BCH1_EN.doc Part Number 308012-001

Setting Up the

Monitor To set up the monitor, ensure that the power is turned off to the

monitor, computer system, and other attached devices, then

follow these steps:

1. Place the monitor in a convenient, well-ventilated location

near your computer.

2. Connect the monitor signal cable 1to the 15-pin connector

on the rear panel of the computer and tighten the screws.

✎Be sure the signal cable aligns with the 15-pin connector. Do not

force the cable onto the connector or you may damage the signal

cable.

3. Connect the monitor power cord 2to the rear panel of the

monitor, then plug the other end into an electrical outlet

that is easily accessible and close to the monitor.

!WARNING: To reduce the risk of electric shock or damage to your

equipment, do not disable the power cord grounding feature. This

equipment is designed to be connected to a grounded (earthed)

power outlet that is easily accessible to the operator. The grounding

plug is an important safety feature.

CAUTION: Be sure that the power outlet you plug your power cord

into is easily accessible and located as close to the monitor as

possible. When you need to disconnect power to the equipment, be

sure to unplug the power cord from the power outlet.

English 1-5

Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 4:36 PM

Pages: 14 Words: 2440 Template: c:\msoffice\templates\working\comm.dot

File Name BCH1_EN.doc Part Number 308012-001

USB Connectors

The base of the monitor has two Universal Serial Bus (USB)

connectors. Use connector ❶to connect the USB signal cable

to the computer. Use connector ❷to connect USB compatible

plug and play devices such as a keyboard, mouse, or joystick if

supported by your computer. This feature provides USB pass-

through and does not support USB host requirements.

CAUTION: This USB connector is not designed for use with high

speed USB devices such as a video camera, scanner, etc. Compaq

recommends connecting high speed devices directly to the computer.

✎These USB connectors operate as a pass-through system. Your

computer must have a USB host controller installed for any

USB-connected devices to operate.

CAUTION: To prevent deterioration of signal transfer or malfunction of

USB devices, USB cables should not exceed the combined length of 9.75

feet (3.0 meters).This length includes both the USB signal cable and the

USB peripheral cable.

1-6 English

Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 4:36 PM

Pages: 14 Words: 2440 Template: c:\msoffice\templates\working\comm.dot

File Name BCH1_EN.doc Part Number 308012-001

Operating the Monitor

Front Panel Controls

No./Icon Control Function

1Horizontal Position Moves screen left or right.

2Vertical Position Moves screen up or down.

3Horizontal Size Adjusts the horizontal screen width.

4Vertical Size Adjusts the vertical screen height.

5Minus Controls degree of adjustment to functions.

6Plus Controls degree of adjustment to functions.

7Pincushion Straightens vertical lines if the picture has

pincushion or barrel distortion.

8Trapezoid Corrects trapezoid distortion. Adjusts the width of

the upper side of the image to equal the lower side.

9Brightness Adjusts screen brightness.

Continued

English 1-7

Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 4:36 PM

Pages: 14 Words: 2440 Template: c:\msoffice\templates\working\comm.dot

File Name BCH1_EN.doc Part Number 308012-001

Front Panel Controls

Continued

No./Icon Control Function

:Contrast Adjusts screen contrast.

;Power LED 1. Green indicates monitor is turned on.

2. Amber indicates energy saver levels.

<Power switch Turns the monitor on and off.

✎Setting Contrast and Brightness controls to their maximum

settings may cause the screen to appear out of focus. To

correct this appearance, decrease the Brightness setting.

To adjust screen controls, complete the following procedures:

1. Press the desired control function button once.

Example: if you want to make adjustments to the

horizontal position (centering), press the Horizontal

Position icon once.

2. Press the Minus and Plus buttons to change the horizontal

position of the screen display.

After a period of two seconds, the adjustments are automatically

saved.

1-8 English

Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 4:36 PM

Pages: 14 Words: 2440 Template: c:\msoffice\templates\working\comm.dot

File Name BCH1_EN.doc Part Number 308012-001

Dual Function Controls

Some controls have dual functions and, when pressed in pairs, will

adjust alternate screen functions. The following table identifies

which controls to press together to adjust a particular function.

Dual Function Controls

Icon Control Function

+Parallelogram Corrects a display that is leaning left or right.

+V-linearity Corrects a compressed display look at the top

or bottom of the screen.

+Pinbalance Adjusts sides of the display when they are

bowed toward left or right.

+Degauss Removes color impurities caused by magnetic

fields. Do not use the degauss feature more

than once within a 30-minute period.

+Reset Resets resolution settings to original factory

settings. Hold buttons down for 5 seconds to

reset.

+User-Delete Resets all data in the user mode memory area.

Hold buttons down for 6 seconds to reset.

+Tilt Adjusts display area for left or right rotation.

+Low Power

Override Disables the power management function.

To make the adjustment:

1. Press both buttons simultaneously and hold them for 2-3

seconds, or the time indicated in the table.

2. Use the Minus or Plus buttons to adjust the settings for

Parallelogram, V-linearity, Pinbalance, and Tilt.

The Minus and Plus buttons do not adjust the following

controls: Degauss, Recall, User-Delete, and Low Power

Override. To make an adjustment using these controls,

simply depress the required pair of buttons for 2-6 seconds

and wait two seconds before making another adjustment.

After a period of two seconds, the adjustments are automatically

saved.

English 1-9

Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 4:36 PM

Pages: 14 Words: 2440 Template: c:\msoffice\templates\working\comm.dot

File Name BCH1_EN.doc Part Number 308012-001

Adjusting the

Monitor Screen Allow the monitor to warm up for 30 minutes before

performing the following procedures. The screen image

stabilizes after a warm-up period.

Optimizing Contrast

For best results, set your screen to a dark background (such as

the DOS prompt) before adjusting the following settings:

1. Set the brightness and contrast controls to their lowest

settings.

2. Increase brightness until the background portions of the

screen are visible, then slowly reduce brightness until the

background is just extinguished.

3. Adjust contrast control to your preference.

Optimizing Focus

The default image size is preset at the factory. The Horizontal

and Vertical Size and Position controls located on the front

control panel can be used to increase the screen size beyond the

default setting. However, increasing the screen image beyond

the default settings may degrade the focus at the outer edge of

the screen.

To enhance focus, use the lowest brightness level that gives

satisfactory results in your viewing environment.

✎Settings that maximize contrast may not offer optimum focus,

and settings that maximize focus may not offer optimum

contrast.

Tabla de contenidos

Otros manuales de Monitor de Compaq

Compaq

Compaq MV7540 Manual de usuario

Compaq

Compaq MV-920 Manual de usuario

Compaq

Compaq CRT Monitor s7500 Manual de usuario

Compaq

Compaq Compaq S710 Manual de usuario

Compaq

Compaq Compaq P1610 Manual de usuario

Compaq

Compaq S920 Manual de usuario

Compaq

Compaq TFT 5000R Manual de usuario

Compaq

Compaq Compaq S700 Manual de usuario

Compaq

Compaq V40 Manual de usuario

Compaq

Compaq 5017 - TFT - 15" LCD Monitor Manual de usuario

Compaq

Compaq Compaq P1610 Manual de usuario

Compaq

Compaq TFT 1501 Manual de usuario

Compaq

Compaq TFT5000S Instrucciones de uso

Compaq

Compaq 5700 Manual de usuario

Compaq

Compaq 8000 - Elite Convertible Minitower PC Manual de usuario

Compaq

Compaq P700 Manual de usuario

Compaq

Compaq Compaq LE1902 Manual de usuario

Compaq

Compaq CV7500 Manual de usuario

Compaq

Compaq S500 Manual de usuario

Compaq

Compaq 8000 - Elite Convertible Minitower PC Manual de usuario

Compaq

Compaq Compaq Q2159 Manual de usuario

Compaq

Compaq MV5500 Instrucciones de uso

Compaq

Compaq 7020 Manual de usuario

Compaq

Compaq TFT 5000R Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación