Compaq TFT500 Manual de usuario
Writer: Marianne Silvetti Saved by:
Troy Witte Saved date: 09/22/97 8:40 AM
Pages: 1Words: 163 Tem
p
late: c:\msoffice\tem
p
lates\comm
n
oti dot
The information in this guide is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR
TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED
HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF
THIS MATERIAL.
This guide contains information protected by copyright. No part of this guide
may be photocopied or reproduced in any form without prior written consent
from Compaq Computer Corporation.
1997 Compaq Computer Corporation.
All rights reserved. Printed in Singapore.
Compaq, Deskpro, and Qvision are registered in the U. S. Patent and
Trademark Office.
The software described in this guide is furnished under a license agreement or
nondisclosure agreement. The software may be used or copied only in
accordance with the terms of the agreement.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
User’s Guide
Compaq TFT500 Flat Panel Monitor
Second Edition (September 1997)
First Edition (March 1997)
Part Number 285012-002
Compaq Computer Corporation
Notice
English
1-1
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 01/29/98 5:12 PM
Pages: 14 Words: 2323 Template: c:\msoffice\templates\normal.dot
File Name BCh1.doc Part Number 285012-001
book 1
ENGLISH
Introduction The Compaq TFT500 Flat Panel Monitor has a 15.1-inch
(38.35 cm) flat panel screen with an active matrix, thin-film
transistor (TFT) liquid crystal display (LCD). It supports
resolutions up to 1024 × 768, and has a wide viewing angle of
+/- 60 degrees horizontal and +/- 40 degrees vertical.
The overall size of the monitor is designed for use in small
working areas or for those who need more working space on the
desk.
1-2 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 01/29/98 5:12 PM
Pages: 14 Words: 2323 Template: c:\msoffice\templates\normal.dot
File Name BCh1.doc Part Number 285012-001
Product Features The monitor features include the following:
■ 15.1-inch (38.35 cm) viewable area display
■ Screen customizing adjustments displayed on-screen in five
different languages: English, Dutch, French, German, and
Spanish
■ Universal Serial Bus Hub interface—plug and play
connectors for use with USB peripherals (mouse, etc.)
■ Plug and play capability if supported by your system
■ Fault Management and Asset Control
■ Desk arm mount (optional)
■ Automatic scanning with screen expansion
■ 1024 × 768 (XGA) resolution
■ Wide viewing angle to allow viewing from a sitting or
standing position, or moving side-to-side
■ Energy Saver feature
■ Compliant with the following regulated specifications:
❏ Swedish MPR II 1990
❏ EPA Energy Star
❏ European Union CE Directives
❏ Swedish TCO 1995
Setting Up the
Monitor To set up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices, then
follow these steps:
1. Place the monitor in a convenient, well-ventilated location
near your computer.
2. Connect the monitor signal cable 1to the 15-pin connector
on the rear panel of the computer and tighten the screws.
English
1-3
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 01/29/98 5:12 PM
Pages: 14 Words: 2323 Template: c:\msoffice\templates\normal.dot
File Name BCh1.doc Part Number 285012-001
✎Be sure the signal cable aligns with the 15-pin connector. Do not
force the cable onto the connector or you may damage the signal
cable.
3. Plug the monitor power cord 2into the base of the
monitor, and then into an electrical outlet 3that is easily
accessible and close to the monitor.
!WARNING: To reduce the risk of electric shock or damage to
your equipment, do not disable the power cord grounding feature.
This equipment is designed to be connected to a grounded
(earthed) power outlet that is easily accessible to the operator. The
grounding plug is an important safety feature.
CAUTION: Be sure that the power outlet you plug your power cord
into is easily accessible and located as close to the equipment
operator as possible. When you need to disconnect power to the
equipment, be sure to unplug the power cord from the power
outlet.
1-4 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 01/29/98 5:12 PM
Pages: 14 Words: 2323 Template: c:\msoffice\templates\normal.dot
File Name BCh1.doc Part Number 285012-001
The base of the monitor also has four Universal Serial Bus
(USB) connectors. Three of these connectors, 1, 2, and 3, are
for connecting USB compatible plug and play devices such as a
keyboard, mouse, or video camera. USB connector 4is used to
connect the USB signal cable to the computer.
Mounting the Display on a Swing Arm
A swing arm mount with tilt and rotation capability can be
purchased separately to use with this monitor. Refer to your
authorized Compaq dealer or reseller for more information on
this.
English
1-5
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 01/29/98 5:12 PM
Pages: 14 Words: 2323 Template: c:\msoffice\templates\normal.dot
File Name BCh1.doc Part Number 285012-001
Operating the Monitor
Front Control Panel
No./Icon Control Function
1Select button 1. Launches on-screen display.
2. Selects function adjustments.
3. Exits menus and on-screen display.
2- Minus button Selects and adjusts the functions.
3+Plus button Selects and adjusts the functions.
4Power switch Turns the monitor on and off.
5Power LED 1. Green indicates monitor is turned on.
2. Yellow indicates suspend mode.
3. Amber indicates sleep mode.
1-6 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 01/29/98 5:12 PM
Pages: 14 Words: 2323 Template: c:\msoffice\templates\normal.dot
File Name BCh1.doc Part Number 285012-001
On-Screen Display Settings
The adjustments for screen settings are located in the on-screen
display and can be viewed in one of five available languages.
The on-screen Main Menu displays the following nine
functions:
Brightness Adjusts the brightness of the screen’s backlights.
Contrast Adjusts screen contrast.
Position Adjusts the horizontal and vertical position of the
screen.
Color Adjusts screen color balance.
Digital Conversion Adjusts the clock and clock phase.
Language Lists five languages available to display on-screen
menus.
Management Turns full screen, power saver, and display modes on
and off, and displays monitor serial number.
Factory Reset Resets the screen to its factory settings.
Exit Turns off the on-screen menu.
How to Adjust Settings
To launch the on-screen display Main Menu:
1. Press the
Select button 1on the monitor front panel. The
Main Menu will display on the monitor screen.
2. To select an item from the Main Menu, scroll down by
pressing the Minus (-) button 2located on the monitor front
panel. To reverse or back up, press the Plus (+) button 3.
3. Highlight your choice and press the Select button 1again.
For example, to select the Position menu, press the Minus
button 2until Size and Position is highlighted, then press
the Select button 1to choose it.
English
1-7
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 01/29/98 5:12 PM
Pages: 14 Words: 2323 Template: c:\msoffice\templates\normal.dot
File Name BCh1.doc Part Number 285012-001
Monitor with On-Screen Display
4. A second level menu displays with expanded menu items.
Again, to make a selection, press the Minus (-) button 2to
scroll down or press the Plus (+) button 3to reverse or
back up.
5. Highlight your choice, then select Save and Return. To
void any changes made, select Cancel instead of Save and
Return.
✎The second level menu for Brightness and Contrast displays
an adjustment screen. Use the Minus button to decrease and
the Plus button to increase the screen brightness and contrast.
6. Adjust the third level menu displays in the same manner.
7. To exit from the on-screen menu, select Exit from the Main
Menu. If the display is a second or third level menu, select
Save and Return or Cancel, then select Exit from the Main
Menu.
The on-screen display is easy to use, just follow the instructions
on the screen.
1-8 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 01/29/98 5:12 PM
Pages: 14 Words: 2323 Template: c:\msoffice\templates\normal.dot
File Name BCh1.doc Part Number 285012-001
Language Selection
When the monitor is turned on for the first time, the on-screen
display is set to the English language. However, the display can
be set to any one of these languages: English, Dutch, French,
German, or Spanish.
To change the display to the language of your choice:
1. Launch the on-screen display by pressing the Select button
➊on the monitor front panel.
2. Move through the list of functions on the on-screen display
by pressing the Minus (-) button ➋repeatedly until the
word Language is highlighted on the screen. To reverse
or back up through the function list, press the Plus (+)
button 3.
3. When
Language is highlighted, press the Select button ➊
to confirm the selection.
Selecting Language on the On-Screen Display
4. From the next screen, press the Minus button ➋to choose a
language.
English
1-9
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 01/29/98 5:12 PM
Pages: 14 Words: 2323 Template: c:\msoffice\templates\normal.dot
File Name BCh1.doc Part Number 285012-001
5. After the language of your choice is highlighted and
selected, press Save and Return to confirm the selection,
and the Language Menu will escape to the Main Menu.
✎Selecting Cancel redisplays the second level Language menu
again in the original language.
6. Within the Main Menu, select Exit to turn off the on-screen
display. From this point, all on-screen functions will
display in your chosen language.
Display Resolutions
The display resolutions listed below are the most commonly
used modes and are set as factory defaults. This monitor
automatically recognizes these preset modes when they are
requested by a software program and will provide the user with
a properly sized and centered display.
Display Resolutions
Memory Channels Resolutions
1. Industry Standard 640 × 350 at 31.5 kHz/70 Hz
2. Industry Standard 640 × 480 at 31.5 kHz/60 Hz
3. VESA 640 × 480 at 37.5 kHz/75 Hz
4. VESA 640 × 480 at 43.3 kHz/85 Hz
5. Industry Standard 720 × 400 at 31.5 kHz/70 Hz
6. VESA 800 × 600 at 37.8 kHz/60 Hz
7. VESA 800 × 600 at 46.9 kHz/75 Hz
8. VESA *(P) 800 × 600 at 53.7 kHz/85 Hz
9. Macintosh 832 × 764 at 49.7 kHz/75 Hz
10. VESA 1024 × 768 at 48.4 kHz/60 Hz
11. VESA 1024 × 768 at 56.5 kHz/70 Hz
12. VESA 1024 × 768 at 60 kHz/75 Hz
* (P) = Proposed
Otros manuales para TFT500
1
Tabla de contenidos
Otros manuales de Monitor de Compaq
Compaq
Compaq TFT1720 Manual de usuario
Compaq
Compaq 7020 Manual de usuario
Compaq
Compaq P1220 Instrucciones de uso
Compaq
Compaq 2025 Manual de usuario
Compaq
Compaq P700 Manual de usuario
Compaq
Compaq 8000 - Elite Convertible Minitower PC Manual de usuario
Compaq
Compaq Q2022a Manual de usuario
Compaq
Compaq S920 Manual de usuario
Compaq
Compaq Compaq S710 Manual de usuario
Compaq
Compaq V1000 Manual de usuario
Compaq
Compaq 1825 Manual de usuario
Compaq
Compaq P700 Manual de usuario
Compaq
Compaq 7500 Series Manual de usuario
Compaq
Compaq S900 Instrucciones de uso
Compaq
Compaq P710 Manual de usuario
Compaq
Compaq S500 Manual de usuario
Compaq
Compaq MV7540 Manual de usuario
Compaq
Compaq ProLiant 5500 Manual de usuario
Compaq
Compaq TFT5030 Manual de usuario
Compaq
Compaq 307713-001 - V 75 - 17" CRT Display Manual de usuario
