CommScope ION-M7P Manual de usuario

Optical Remote Unit

ION™-M7P/7P/85P/19P

(ML-Cabinet)

Manual

MF0145A4A

Manual for

ION™-M7P/7P/85P/19P (ML-cab)

Page 2 Manual ION-M7P-7P-85P-19P

MF0145A4A.doc

Andrew Solutions is a trademark of CommScope, Inc.

All information contained in this manual has been revised thoroughly. Yet Andrew

Solutions accepts no liability for any omissions or faults.

Andrew Solutions reserves the right to change all hard- and software characteristics

without notice.

Names of products mentioned herein are used for identification purposes only and

may be trademarks and / or registered trademarks of their respective companies.

No parts of this publication may be reproduced, stored in a retrieval system,

transmitted in any form or by any means, electronical, mechanical photocopying,

recording or otherwise, without prior written permission of the publisher.

Andrew Wireless Systems GmbH, 20-October-2011

Page 3

TABLE OF CONTENTS

1. GENERAL 6

1.1. USED ABBREVIATIONS 6

1.2. HEALTH AND SAFETY WARNINGS 7

1.3. ABOUT ANDREW SOLUTIONS 9

1.4. INTERNATIONAL CONTACT ADDRESSES FOR CUSTOMER SUPPORT 10

2. FUNCTIONAL DESCRIPTION 12

2.1. PURPOSE 12

2.2. THE ION™-M7P/7P/85P/19P (INTELLIGENT OPTICAL NETWORK; MMR) 12

3. COMMISSIONING 14

3.1. MECHANICAL INSTALLATION 14

3.1.1. General 14

3.1.2. Wall Mounting of RU 16

3.1.3. Pole Mounting of RU 17

3.2. ELECTRICAL INSTALLATION 19

3.2.1. General 19

3.2.2. Connections 20

3.2.3. Grounding 21

3.3. CONNECTION OF THE ANTENNA CABLES 21

3.4. POWER CONNECTION 22

3.5. OPTICAL-FIBER-CABLE CONNECTION - RULES 23

3.5.1. Protective Plug 25

3.5.2. Protective-Tube Kit 27

3.6. COMMISSIONING 29

4. ALARMS 33

4.1. BITE AND ALARMS 33

4.2. HANDLING OF ALARMS 33

4.3. ALARM STATUS 33

4.4. STATUS LED ALARMS 34

4.5. EXTERNAL ALARM INPUTS AND OUTPUTS 35

Manual for

ION™-M4/8/9 EP (ML-cab)

Page 4 Manual ION-M7P-7P-85P-19P

MF0145A4A.doc

4.6. TROUBLESHOOTING 36

5. MAINTENANCE 37

5.1. GENERAL 37

5.2. REPLACING THE FAN UNIT 38

5.3. CLEANING THE HEAT SINK 39

6. APPENDIX 40

6.1. ILLUSTRATIONS 40

6.2. SPECIFICATIONS 41

6.2.1. Electrical Specifications 41

6.2.2. Mechanical Specifications 41

6.2.3. Environmental and Safety Specifications 41

6.3. SPARE PARTS 42

7. INDEX 43

Page 5

FIGURES AND TABLES

figure 3-1 Mounting bracket installation.................................................................... 16

figure 3-2 RU wall mounting ..................................................................................... 16

figure 3-3 Pole-mounting kit, view from different sides............................................. 17

figure 3-4 Pole-mounting, ML-cabinet, assembly drawing........................................ 18

figure 3-5 Pole mounting of RU, finished.................................................................. 18

figure 3-6 Connector flange of ION-M7P/7P/85P/19P.............................................. 20

figure 3-7 RS485 connector...................................................................................... 20

figure 3-8 Grounding bolt.......................................................................................... 21

figure 3-9 Grounding bolt, schematic view................................................................ 21

figure 3-10 AC power supply plug............................................................................. 22

figure 3-11 Protective-plug assembly ....................................................................... 25

figure 3-12 Tube-kit installation................................................................................. 28

figure 4-1 Flange connector, 5 poles........................................................................ 35

figure 4-2 Flange connector, 7 poles........................................................................ 35

figure 4-3 Alarm inputs and outputs, standard.......................................................... 36

figure 5-1 Fan unit and heat sink.............................................................................. 38

figure 6-1 Cabinet drawing........................................................................................ 40

table 1-1 List of international contact addresses....................................................... 11

table 3-1 Specified torques....................................................................................... 15

table 3-2 RS485 connector, pin assignment............................................................. 20

table 4-1 Status LED alarms..................................................................................... 34

Page 6 Manual ION-M7P-7P-85P-19P

MF0145A4A.doc

1. GENERAL

1.1. USED ABBREVIATIONS

3GPP 3rd Generation Partnership Project

4G 4th Generation

ALC Automatic Level Control

AMPS American Mobile Phone System or Advanced Mobile Phone System

AWS Advanced Wireless Services

BBU Battery Backup Unit

BCCH Broadcast Control Channel

BITE Built-In Test Equipment

BTS Base Transceiver Station

CDMA Code Division Multiple Access

CEPT Conférénce Européenne des Postes et Télécommunications

CF Center Frequency

CFO Center Frequency Offset

CPD Channel Power Detection

DL Downlink

DoC Declaration of Conformity

EDGE Enhanced Data Rates for GSM Evolution

ESD Electrostatic Discharge

ETS European Telecommunication Standard

ETSI European Telecommunication Standards Institute

FCC Federal Communications Commission

FSK Frequency Shift Keying

GSM Global System for Mobile Communication

GUI Graphical User Interface

I2C-Bus Inter Integrated Circuit Bus (Philips)

ID No Identification Number

IF Intermediate Frequency

LMT Local Maintenance Terminal

LNA Low-Noise Amplifier

LO Local Oscillator

LTE Long Term Evolution

MIMO Multiple Input Multiple Output

MS Mobile Station

OMC Operation and Maintenance Center

OTRx Optical Transceiver = SRMU (Subrack Master Unit)

PCMCIA Personal Computer Modem Communication International Association

PCS Personal Communication System

PSTN Public Switched Telephone Network

R&TTE Radio & Telecommunications Terminal Equipment

Rev Revision

RF Radio Frequency

RLP Radio Link Protocol

RSSI Receive Signal Strength Indication

RTC Real-Time Clock

RX Receiver

SCL Serial Clock

SDA Serial Data

SISO Single Input Single Output

SPD Switching Point Detector

SRMU Subrack Master Unit = OTRx (Optical Transceiver)

TCH Traffic Channel

TDD Time-Division Duplex

TDMA Time Division Multiple Access

TX Transmitter

UL Uplink

UMR Universal Measurement Receiver

UMTS Universal Mobile Telecommunication System

UPS Uninterruptible Power Supply

VSWR Voltage Standing Wave Ratio

WDM Wavelength Division Multiplex

WiMAX Worldwide Interoperability for Microwave Access

1.2. HEALTH AND SAFETY WARNINGS

1. Only suitably qualified personnel is allowed to work on this unit and only after

becoming familiar with all safety notices, installation, operation and maintenance

procedures contained in this manual.

2. Read and obey all the warning labels attached to the unit. Make sure that the

warning labels are kept in a legible condition and replace any missing or

damaged labels.

3. Obey all general and regional installation and safety regulations relating to work

on high voltage installations, as well as regulations covering correct use of tools

and personal protective equipment.

4. Keep operating instructions within easy reach and make them available to all

users.

5. It is the responsibility of the network provider to implement prevention measures

to avoid health hazards which may be associated to radiation from the antenna(s)

connected to the unit.

6. Note for a Class A digital device or peripheral:

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own

expense.

Page 7 Manual ION-M7P-7P-85P-19P

MF0145A4A.doc

7. Make sure, access is restricted to qualified personnel.

8. Only licence holders for the respective frequency range are allowed to operate

this unit.

9. Corresponding local particularities and regulations must be observed. For national

deviations please refer to the respective documents included in the manual CD

delivered.

10.Use this equipment only for the purpose specified by the manufacturer. Do not

carry out any modifications or fit any spare parts which are not sold or

recommended by the manufacturer. This could cause fires, electric shock or other

injuries.

11.Due to power dissipation, the repeater may reach a very high temperature. Do not

operate this equipment on or close to flammable materials.

12.Before opening the unit, disconnect mains.

13.ESD precautions must be observed! Before commencing maintenance work, use

the available grounding system to connect ESD protection measures.

14.This unit complies with European standard EN60950.

15.Make sure the repeater settings are according to the intended use (see also

product information of manufacturer) and regulatory requirements are met.

16.Although the repeater is internally protected against overvoltage, it is strongly

recommended to earth the antenna cables close to the repeater’s antenna

connectors for protection against atmospheric discharge.

17.Laser radiation! Do not stare into the beam; do not view it directly or with optical

instruments.

Page 8 Manual ION-M7P-7P-85P-19P

MF0145A4A.doc

Page 9 Manual ION-M7P-7P-85P-19P

MF0145A4A.doc

1.3. ABOUT ANDREW SOLUTIONS

Andrew Wireless Systems GmbH based in Buchdorf/Germany, is a leading

manufacturer of coverage equipment for mobile radio networks, specializing in high

performance, RF and optical repeaters. Our optical distributed networks and RF

repeater systems provide coverage for every application: outdoor use, indoor

installations, tunnels, subways and many more.

Andrew Wireless Systems GmbH has unparalleled experience in providing RF

coverage and capacity solution for wireless networks in both indoor and outdoor

environment and belongs to Andrew Solutions, a CommScope Company.

Andrew Solutions is the foremost supplier of one-stop, end-to-end radio frequency

(RF) solutions. Our products are complete solutions for wireless infrastructure from

top-of-the-tower base station antennas to cable systems and cabinets, RF site

solutions, signal distribution, and network optimization.

Andrew Solutions has global engineering and manufacturing facilities. In addition, it

maintains field engineering offices throughout the world.

We operate a quality management system in compliance with the requirements of

ISO 9001. All equipment is manufactured using highly reliable material. In order to

ensure constant first-rate quality of the products, comprehensive quality monitoring is

conducted at all fabrication stages. Finished products leave the factory only after a

thorough final acceptance test, accompanied by a test certificate guaranteeing

optimal operation.

Note: Exceptions of and national deviations from this intended use may be

possible. To observe corresponding local particularities and

regulations, please refer to the respective documents (also in

national language) which are included in the manual CD delivered.

To make the most of this product, we recommend you carefully read the instructions

in this manual and commission the system only according to these instructions.

For technical assistance and support, please also contact the local office or Andrew

Solutions directly at one of the addresses listed in the following section.

Page 10 Manual ION-M7P-7P-85P-19P

MF0145A4A.doc

1.4. INTERNATIONAL CONTACT ADDRESSES FOR CUSTOMER SUPPORT

Americas:

Canada United States

Andrew Solutions Canada Andrew Solutions,

Andrew LLC, A CommScope Company

Mail 620 North Greenfield Parkway

Garner, NC 27529

U.S.A. Mail 620 North Greenfield Parkway

Garner, NC 27529

U.S.A.

Phone +1-905-878-3457 (Office)

+1-416-721-5058 (Mobile) Phone +1-888-297-6433

Fax +1-905-878-3297 Fax +1-919-329-8950

E-mail Peter.Masih@commscope.com,

WIsupport.us@commscope.com

E-mail [email protected]

Brazil & South America Mexico, Central America &

Caribbean region

CommScope Cabos do Brasil Ltda. Andrew Corporation Mexico,

SA DE CV

Mail

Av. Com. Camilo Julio 1256

Zonal Industrial CP 597

Sorocaba SP 18086-000

Brazil

Mail

Av. Insurgentes Sur 688, Piso 6

Col. Del Valle, CP: 03100

Mexico City

Mexico

Phone + 55-15-9104-7722 Phone

+52-55-1346-1900 (Office)

+52-1-55-5419-5260 (Mobile)

Fax + 55-15-2102-4001 Fax +52-55-1346-1901

E-mail [email protected]

APAC Countries:

China, India and Rest of Asia Australia & New Zealand

Andrew International Corporation Andrew Corporation (Australia) Pty Ltd.

Mail

Room 915, 9/F

Chevalier Commercial Centre

8 Wang Hoi Rd

Kowloon Bay

Hong Kong

Mail

Unit 1

153 Barry Road

Campbellfield

VIC 3061

Australia

Phone +852-3106-6100 Phone +613-9300-7969

Fax +852-2751-7800 Fax +613-9357-9110

E-mail [email protected]

E-mail WIsupport.Australia@commscope.com

Otros manuales para ION-M7P

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de CommScope

CommScope

CommScope NG4access ODF Platform Value-Added Module Manual de usuario

CommScope

CommScope FDC-W8-FAT Manual de usuario

CommScope

CommScope ST-BSP60 Manual de usuario

CommScope

CommScope ION-M17EHP/19P Manual de usuario

CommScope

CommScope NETCONNECT 1479542-1 Manual de usuario

CommScope

CommScope RUCKUS SmartZone 300 Manual de usuario

CommScope

CommScope SYSTIMAX 360 iPatch G2 MPO Manual de usuario

CommScope

CommScope LSX Manual de usuario

CommScope

CommScope AMP NETCONNECT MRJ21 Manual de usuario

CommScope

CommScope SYSTIMAX AirSPEED AP542 Manual de usuario

CommScope

CommScope TC-96370-IP Manual de usuario

CommScope

CommScope CPPR-QF-F-1U-E Manual de usuario

CommScope

CommScope UNJ10G Manual de usuario

CommScope

CommScope SCIL-B Manual de usuario

CommScope

CommScope FPX Series Manual de usuario

CommScope

CommScope ONECELL RP5200 Manual

CommScope

CommScope SYSTIMAX 100BASE-T Manual de usuario

CommScope

CommScope RUCKUS SmartZone 100 Manual de usuario

CommScope

CommScope OneCell RP5000 Series Guía

CommScope

CommScope WCS-2 Manual de usuario

CommScope

CommScope FPX Series Manual de usuario

CommScope

CommScope CPP-UDDM-SL-1U-24 Manual de usuario

CommScope

CommScope ION-M7P Manual de usuario

CommScope

CommScope EHD Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario