Commell HS-872P Manual de usuario

HS-872P(E)

Half-size Single Board Computer

User’s Manual

Edition: 1.3

2011/10/31

HS-872P(E) User’s Manual

reserved. The information in this document is subject to change without prior notice to make

improvements to the products.

This document contains proprietary information and protected by copyright. No part of this

document may be reproduced, copied, or translated in any form or any means without prior

written permission of the manufacturer.

All trademarks and/or registered trademarks contains in this document are property of their

respective owners. Disclaimer

The company shall not be liable for any incidental or consequential damages resulting from

the performance or use of this product.

The company does not issue a warranty of any kind, express or implied, including without

limitation implied warranties of merchantability or fitness for a particular purpose.

The company has the right to revise the manual or include changes in the specifications of

the product described within it at any time without notice and without obligation to notify any

person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at TUhttp://www.commell.com.twUT.

HS-872P(E) User’s Manual

Packing List:

Please check the package material before you install the system.

Hardware:

HS-872P(E) Single Board Computer x 1

Cable Kit:

PS/2 Keyboard & Mouse Cable x 1

(OALPS2/MK)

CPU Cooler x 1

(OHS-P-M-3)

4-pin to 3-pin ATX cable x 1

(OAL-ATX-C)

Floppy flat cable x 1

(OALFD/NB)

SATA Cable x 2

(OALSATA-L)

44-pin ATA33 IDE Cable x 1

(OALUDMA33-8)

44pin

40pin

44pin

(HS-872P(E)G only)

DB25 & DB9 cable x 1

(OALP1S1)

(HS-872P(E)DG2 only)

Dual DB9 & DB25 cable x 1

(OAL2S1P)

Printed Matters:

Driver CD x 1 (Including User’s Manual)

USB cable x 1

(OALUSBA-1) DVI module with DVI cable x 1

(BADP2NDIODVI & OALDVI-P)

Audio Port Cable x 1

(OALPJ-N)

HS-872P(E) User’s Manual

Index

Chapter 1 <Introduction>................................................6

1.1 <Product Overview> ..............................................................................6

1.2 <Product Specification>........................................................................7

1.3 < Mechanical Drawing > ........................................................................9

1.4 <Block Diagram>..................................................................................10

Chapter 2 <Hardware Setup>.......................................12

2.1 <Connector Location>.........................................................................12

2.2 <Connector Reference>.......................................................................14

2.2.1 <Internal Connector> ...................................................................14

2.2.2 <External Connector>...................................................................14

2.3 <Jumper Reference>............................................................................15

2.4 < CPU and Memory Setup >................................................................16

2.4.1 <CPU Setup> ............................................................................16

2.4.2 <Memory Setup>........................................................................17

2.5 <CMOS Setup> .....................................................................................18

2.6 <Enhanced IDE Interface>...................................................................19

2.7 <Serial ATA interface>..........................................................................20

2.8 <LAN Interface>....................................................................................20

2.9.1 <Analog VGA Interface> ..........................................................21

2.9.2 <Digital Display> ....................................................................22

2.9.3 <DVI Interface > .....................................................................25

2.9.4<TV-out Interface> ...................................................................26

2.10 <Onboard Audio Interface>...............................................................29

2.11 <USB2.0 Interface> ............................................................................30

2.12 <Serial Port Jumper Setting >...........................................................32

2.13 <Power and Fan Installation> ...........................................................33

2.13.1 <Power connectors>...................................................................33

2.13.2 <Fan Connectors> .....................................................................34

HS-872P(E) User’s Manual

2.15 <Switch and Indicator>......................................................................36

Chapter 3 <System Configuration>.............................38

3.1 <Video Memory Setup>........................................................................38

3.2 <Audio Setting>....................................................................................40

Chapter 4 <BIOS Setup>...............................................41

(This Page is Left for Blank)..........................................................42

Appendix A <I/O Port Pin Assignment> ......................43

A.1 IDE Port.................................................................................................43

A.2 <Serial ATA Port>.................................................................................43

A.3 < Floppy Port >.....................................................................................44

A.4 <Serial Port>.........................................................................................44

A.5 <IrDA Port>...........................................................................................44

A.6 <VGA Port>...........................................................................................45

A.7 <LAN Port>...........................................................................................45

A.8 < USB Port >.........................................................................................45

A.9 <AT Keyboard Port>............................................................................46

A.10 <PS/2 Keyboard & Mouse Port>.......................................................46

Appendix B <Flash BIOS>............................................48

B1. <BIOS Auto Flash Tool>......................................................................48

B2. <Flash Method> ...................................................................................48

Appendix C <System Resources>...............................49

Appendix D <Programming GPIO’s>...........................53

Appendix E <Watch Dog timer Setting >.....................54

Contact Information ......................................................56

HS-872P(E) User’s Manual Introduction

Product Overview 6

Chapter 1 <Introduction>

1.1 <Product Overview>

The HS-872P(E) is an all-in-one single board computer with PISA bus. with supporting Intel

Core 2 Duo / Core Duo / Core solo / Celeron M processor for 533/667MHz front side bus,

Intel 945GM(E) and ICH7-M chipset, integrated GMA950 graphics, DDR2 SDRAM memory,

Realtek AC97 Audio, Serial ATA and two Intel 82573L Gigabit LAN .

Intel Yonah dual core Processor

The board supports Intel Core 2 Duo / Core Duo / Core Solo / Celeron M processor with

533/667MHz front side bus, 2MB L2 cache, to provide more powerful performance than

before.

New features for Intel 945GM(E) chipset

The board integrates Intel 945GM(E) and ICH7-M chipset, to provide new generation of the

mobile solution, supports Intel GMA950 graphics, DDR2 533/667 memory, built-in high

speed mass storage interface of serial ATA, AC97 Audio with 5.1 channels surrounding

sound.

All in One multimedia solution

Based on Intel 945GM(E) and ICH7-M chipset, the board provides high performance

onboard graphics, 18-bit Dual channel LVDS interface, DVI and HDTV and 5.1 channels

AC97 Audio, to meet the every requirement of the multimedia application.

Flexible Extension Interface

The board also provides Compact Flash Type II socket and one mini-PCI socket.

HS-872P(E) User’s Manual Introduction

Product Specification 7

1.2 <Product Specification>

General Specification

Form Factor Half-size PISA CPU card

CPU Intel® Core 2 Duo/ Core Duo/ Core Solo/ Celeron M processor

Package type: Micro- FCPGA478

Front side bus: 533/667MHz

Memory 1 x 240-pin DDR2 400/533/667MHz SDRAM up to 2GB

Unbufferred, none-ECC memory supported only

Chipset Intel® 945GM(E) and ICH7-M

BIOS Phoenix-Award v6.00PG 4Mb PnP flash BIOS

Green Function Power saving mode includes doze, standby and suspend modes.

ACPI version 1.0 and APM version 1.2 compliant

Watchdog Timer System reset programmable watchdog timer with 1 ~ 255 sec./min.

of timeout value

Real Time Clock Intel® ICH7-M built-in RTC with lithium battery

Enhanced IDE UltraATA33 IDE interface supports up to 2 ATAPI devices

One 44-pin IDE port onboard

One CompactFlash Type II socket on solder side

Serial ATA Intel® ICH7-M integrates 2 Serial ATA interfaces

(No RAID Function)Up to 150MB/s of transfer rate

Multi-I/O Port

Chipset Intel® ICH7-M with Winbond® W83627THG controller

Serial Port One RS232 and one jumper selectable RS232/422/485

USB Port 4 x Hi-Speed USB 2.0 ports with 480Mbps of transfer rate

Parallel Port One internal bi-direction parallel port with SPP/ECP/EPP mode

Floppy Port One internal Floppy port

IrDA Port One IrDA compliant Infrared interface supports SIR

K/B & Mouse PS/2 keyboard and mouse port

GPIO One 12-pin Digital I/O connector with 8-bit programmable

Smart Fan One CPU fan connectors for fan speed controllable

VGA Display Interface

Chipset Intel® 945GM(E) GMCH (Graphic Memory Controller Hub)

Memory Up to 224MB shared with system memory

Display Type CRT, LCD monitor with analog display, DVI, HDTV

Connector External DB15 female connector on rear I/O panel

Onboard 40-Pin LVDS connector

Onboard 26-Pin DVI connector

Onboard 9-Pin TV-out connector

HS-872P(E) User’s Manual Introduction

Product Specification 8

Ethernet Interface

Chipset Intel 82573L Gigabit Ethernet controller

Type Triple speed 10/100/1000Base-T

auto-switching Fast Ethernet

Full duplex, IEEE802.3U compliant

Connector External two RJ45 connectors with LED on rear I/O panel

Solid State Disk Interface

Flash Type Compact Flash Type II for Compact Flash Card or Micro Drive

ISA Interface

ISA Bridge Winbond W83628G & W83629G

Function I/O & IRQ supported only, no support DMA & bus mastering

Audio Interface

Chipset REALTEK ALC655

Interface 5.1 channel surround audio with Line-in, Line-out and MIC-in

Connector Onboard audio connector with pin header

Onboard CD-IN connector

Expansive Interface

Mini PCI 1 x Mini PCI socket

Power and Environment

Power

Requirement +5V, +12 DC input & 5VSB Requirement

Dimension 185 (L) x 127 (H) mm

Temperature Operating within 0 ~ 60P

PC (32 ~ 140P

PF)

Storage within -20 ~ 85P

PC (-4 ~ 185P

PF)

Ordering Code

HS-872P(E)DG Support Intel Core 2 Duo/Core Duo/Core solo/Celeron M

Processor with onboard VGA, DVI, LVDS, Audio, SATA, Giga LAN,

USB2.0, Serial port, LPT, CF, GPIO, Mini PCI, FDD,IrDA

HS-872P(E)DG2 Same as above and with secondary Gigabit LAN

The specifications may be different as the actual board.

For further product information please visit the website at TUhttp://www.commell.com.twUT

HS-872P(E) User’s Manual Introduction

Mechanical Drawing 9

1.3 < Mechanical Drawing >

Unit: inch

HS-872P(E) User’s Manual Introduction

Block Diagram

1.4 <Block Diagram>

Intel Yonah Processo

Intel GMA950 Graphics

945GM(E)

ICH7-M

BIOS

AC97 ALC655

HDTV＆LVDS＆DVI

W83627THG

2 x SATA

CompactFlash＆IDE

2 x Serial ports

4 x USB2.0 ports

8-bit GPIO

Intel 82573L

2 x GLAN

1 x 240-pin DDR2

533/667MHz up to

2GB

1 x Parallel port

1 x Floppy port

1 x IrDA

PICMG Backplane

ISA Bridge

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Commell

Commell

Commell P4BWA Manual de usuario

Commell

Commell LV-679 Manual de usuario

Commell

Commell LV-67I Manual de usuario

Commell

Commell LS-37B Manual de usuario

Commell

Commell LE-374 Manual de usuario

Commell

Commell LV-67M Manual de usuario

Commell

Commell LP-174 Manual de usuario

Commell

Commell HE-B72 Manual de usuario

Commell

Commell LV-6715 Manual de usuario

Commell

Commell Mini-ITX Motherboard LV-671 Manual de usuario

Commell

Commell FE-97G Manual de usuario

Commell

Commell LV-67N-G Manual de usuario

Commell

Commell LS-37L Manual de usuario

Commell

Commell LS-37B Manual de usuario

Commell

Commell LV-602 Manual de usuario

Commell

Commell LV-67S Manual de usuario

Commell

Commell LP-178 Manual de usuario

Commell

Commell LV-67Z7 Manual de usuario

Commell

Commell PMCA Manual de usuario

Commell

Commell LE-37N Manual de usuario

Commell

Commell LE-37M Manual de usuario

Commell

Commell LS-579 Manual de usuario

Commell

Commell LV-675 Manual de usuario

Commell

Commell P4ELA Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario