Commell ES-270 Manual de usuario

ES-270

ETX CPU module

User’s Manual

Edition 1.0

2006/09/04

ES-270 User’s Manual

reserved. The information in this document is subject to change without prior notice to make

improvements to the products.

This document contains proprietary information and protected by copyright. No part of this

document may be reproduced, copied, or translated in any form or any means without prior

written permission of the manufacturer.

All trademarks and/or registered trademarks contains in this document are property of their

respective owners. Disclaimer

The company shall not be liable for any incidental or consequential damages resulting from

the performance or use of this product.

The company does not issue a warranty of any kind, express or implied, including without

limitation implied warranties of merchantability or fitness for a particular purpose.

The company has the right to revise the manual or include changes in the specifications of

the product described within it at any time without notice and without obligation to notify any

person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at TUhttp://www.commell.com.twUT

ES-270 User’s Manual

Packing List

Please check the package before you starting setup the system

Hardware:

ES-270 ETX CPU Module x 1

Cable Kit:

26-pin slim type floppy cable x 1

Serial ATA ribbon cable x 2

Other Accessories:

Divers CD (including User’s Manual) x 1

Printed User’s Manual x 1

Head Sink and four screws

ES-270 User’s Manual

Index

Chapter 1 <Introduction>.....................................................................................7

1.1 <Product Overview>.................................................................................7

1.2 <Product Specification>...........................................................................8

1.3 <Mechanical Drawing>...........................................................................10

1.4 <Block Diagram>....................................................................................11

Chapter 2 <Hardware Setup>.............................................................................12

2.1 <Connector Location>............................................................................12

2.2 <Connector Reference>.........................................................................13

2.2.1 <Internal Connector>..................................................................13

2.3 <CPU and Memory Setup>....................................................................14

2.3.1< CPU>........................................................................................14

2.3.2 <Memory> ..................................................................................15

2.4 <Enhanced IDE Interface>.....................................................................16

2.5 <Serial ATA Interface>...........................................................................16

2.6 <Floppy Port>.........................................................................................17

2.7 <LAN Interface>.....................................................................................18

2.8 <Onboard Display Interface>.................................................................18

2.9 <USB2.0 Interface>................................................................................19

Chapter 3 <System Configuration>...................................................................21

3.1 <Video Memory Setup> .........................................................................21

Chapter 4 <BIOS Setup> ....................................................................................24

Appendix A <ETX connector Assignment>……………………………………….26

Appendix B <I/O Port Pin Assignment> ...........................................................29

B.1 <Floppy Port> ........................................................................................29

B.2 <Serial ATA Port>..................................................................................29

Appendix C <Flash BIOS>..................................................................................31

C.1<BIOS Auto Flash Tool>.........................................................................31

ES-270 User’s Manual

C.2<Flash Method>......................................................................................31

Appendix D <System Resources>…………………………………………….……32

Contact Information............................................................................................36

ES-270 User’s Manual

(The Page is Left For Blank)

ES-270 User’s Manual Introduction

Product Overview 7

Chapter 1 <Introduction>

1.1 <Product Overview>

ES-270 is the new generation of the ETX CPU module, with supporting Intel Core Duo/Core

Solo processors for 533/667MHz front side bus, Intel 945GM and ICH7-M chipset,

integrated GMA950 graphics, DDR2 SO-Dimm SDRAM, REALTEK AC97 Audio and serial

ATA with provide the economical embedded platform.

Intel Yonah dual core Processor

The board supports Intel Core Duo/Core Solo processors with 533/667MHz front side bus,

2MB L2 cache, to provide more powerful performance than before.

New features for Intel 945GM chipset

The board integrates Intel 945GM and ICH7-M chipset, to provide new generation of the

mobile solution, supports Intel GMA950 graphics, DDR2 400/533/667 memory, built-in high

speed mass storage interface of serial ATA, AC97 Audio with 5.1 channels surrounding

sound.

All in One multimedia solution

Based on Intel 945GM and ICH7-M chipset, the board provides high performance onboard

graphics, 24/18-bit Single/dual channel LVDS interface, 5.1 channels AC97 Audio, to meet

the very requirement of the multimedia application.

ES-270 User’s Manual Introduction

Product Specification

1.2 <Product Specification>

General Specification

Form Factor ETX CPU module

CPU Intel® Core Duo/Core Solo processors

Package type: FC-PGA478

Front side bus: 533/667MHz

Memory 1 x 200-pin DDR2 SoDIMM SDRAM up to 2GB

Unbufferred, none-ECC memory supported only

Chipset Intel® 945GM (Northbridge) and ICH7-M (Southbridge)

BIOS Phoenix-Award v6.00PG 4Mb PnP flash BIOS

Green Function Power saving mode includes doze, standby and suspend modes.

ACPI version 1.0 and APM version 1.2 compliant

Watchdog Timer System reset programmable watchdog timer with 1 ~ 255

sec./min. of timeout value

Real Time Clock Intel® ICH7-M built-in RTC with lithium battery

Enhanced IDE Support one channels & up to two IDE device

Support Ultra DMA 33/66/100MHz IDE device

Serial ATA Intel® ICH7-M integrates 2 Serial ATA interfaces(No RAID

Function)

Up to 150MB/s of transfer rate

Multi-I/O Port

Chipset Intel® ICH7-M with Winbond® W83627THG controller

Serial Port Support two Serial Port

USB Port Support four USB 2.0 Ports

Floppy Port One slim type Floppy port

IrDA Port One IrDA compliant Infrared interface supports SIR

K/B & Mouse Support PS/2 keyboard and mouse interface

VGA Display Interface

Chipset Intel® 945GM GMCH integrate GMA 950

Frame Buffer Up to 224MB shared with system memory

Display Type Onboard 18-bit ＆optional 24-bit dual channel LVDS, CRT

Ethernet Interface

Chip Intel 82562 PHY

Type 10Base-T / 100Base-TX

auto-switching Fast Ethernet

Full duplex, IEEE802.3U compliant

Audio Interface

Chip Intel® ICH7M with Realtek® ALC655 AC97 Audio compliance

Interface 5.1 channels sound output

Support Line-in, Line-out and MIC-in

ES-270 User’s Manual Introduction

Product Specification 9

Expansive Interface

PCI 4 PCI bus master interface

Power and Environment

Power

Requirement 5V, 5Vstandby

Dimension 114mm x 95mm

Temperature Operating within 0 ~ 60℃(32 ~ 140℉)

Storage within -20 ~ 85℃(-4 ~ 185℉)

Ordering Code

ES-270 Support Intel Core Duo/Solo processor with onboard LVDS,

Audio, SATA, USB2.0, LPT, PCI, FDD

1. The specifications may be different as the actual production.

For further product information please visit the website at http://www.commell.com.tw

ES-270 User’s Manual Introduction

Mechanical Drawing

1.3 <Mechanical Drawing>

Tabla de contenidos

Otros manuales de Hardware de computadora de Commell

Commell

Commell FS-A79 Manual de usuario

Commell

Commell FS-97E Manual de usuario

Commell

Commell MPX-885 Manual de usuario

Commell

Commell MPX-9125 Manual de usuario

Commell

Commell MPX-574 Manual de usuario

Commell

Commell LS-570 Manual de usuario

Commell

Commell HE-B73 Manual de usuario

Commell

Commell MP-6010 Manual de usuario

Commell

Commell MPX-225 Manual de usuario

Commell

Commell MP-954GPS Manual de usuario

Commell

Commell HS-870P Manual de usuario

Commell

Commell MP-954 Manual de usuario

Commell

Commell FS-979 Manual de usuario

Commell

Commell LE-375 Manual de usuario

Commell

Commell CMB-570 Manual de usuario

Commell

Commell HE-772 Manual de usuario

Commell

Commell SP-501 Manual de usuario

Commell

Commell LE-565 Manual de usuario

Commell

Commell CMB-67K-02 Manual de usuario

Commell

Commell CMB-673 Manual de usuario

Commell

Commell FS-A75 Manual de usuario

Commell

Commell MP-954 Manual de usuario

Commell

Commell CMB-67H-02 Manual de usuario

Commell

Commell MPX-954 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario