Commax DRC-700S Manual de usuario
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
•Thank you for purchasing COMMAXproducts.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for anysafety accidents caused byabnormaloperation of the product.
COMMAX LOBBY PHONE DRC-700S
User Manual
Intelligent Security & Fire Ltd.
2
Part names
①
TFT-LCD Screen
⑦
Security Button
②
Mike
⑧
Call Button
③
RF CARD Receiver
⑨
Program Button
④
Camera
⑩
Speaker
⑤
Dial Button
⑪
LAN
⑥
Electric Key Button
Intelligent Security & Fire Ltd.
3
1. Main Screen Setting
1.1. Main Screen
Skin Theme
Flip Clock
Red Clock
Green Clock
Black Clock
1.2. Status
Icon
Description
Icon
Description
Lan Connection
Registered server status
Display out post lobby
phone
Not Registered server status
Display building lobby
phone
RF-Card Data save status
Intelligent Security & Fire Ltd.
4
2. Security Call
①Push (Security Guard Post) Button
②Push (Call) button
③Call sound is ringing and call Security Guard Post.
④Call Security Guard Post when guard answer call. (Time: 1 min.)
⑤Press “X”button when terminate call.
⑥Security Guard push ‘Open door’button, “Door is open”voice
comment then door is open.
⑦If line is busy, call it later.
Picture1. Call security Guard
※This is to call up the registered guard stations in advance by a
manager
Intelligent Security & Fire Ltd.
5
3. Call house
3.1. Communication call between residence
I. When building number is set in advance:
When building No. already registered to Call Prefix
Picture2. Screen for registering house No.
①Input unit No. to key board.
Ex) Unit 101 input ‘101’
②Push (call) button.
③Ringing call sound and call unit.
④When tenants answer call, calling is on. (Max. time: 1 min)
⑤Press “X”button when terminate call.
⑥Tenant push ‘Open door’button, “Door is open”voice comment
then door is open
Intelligent Security & Fire Ltd.
6
II. When building number is NOT set in advance:
When building number hasn’t been registered Call Prefix yet.
Picture3. Building house No. register screen
①Input Building No. to key board.
Ex) Building 101 input ‘101’
②Input unit No. to key board.
Ex) Unit 101 input ‘101’
③Push (call) button.
④Ringing call sound and call unit.
⑤When tenants answer call, calling is on. (Max. time: 1 min)
⑥Press “X”button when terminate call.
⑦Tenant push ‘Open door’button, “Door is open”voice comment
then door is open
Intelligent Security & Fire Ltd.
7
4. Access authorization
4.1 Opening the entrance with RF card.
①Tag RF card to ‘Card tagging window’.
②The common entrance get be opened with a vocal message, “door
opens”when the access is successful.
③The entrance does not be opened when the access fails with
sound.
Picture4. Tag RF-Card
4.2 Access by PIN No.
I. Building Number designated case:
Building Number designated in Call Prefix
①Input unit No. through key board.
②Push (Key) button.
③Input designated house PIN No.
④Push (call) button.
⑤If access authorization is successful, Door is open with “Door is
open”voice message.
⑥If access is failed, warning sound is activated.
Intelligent Security & Fire Ltd.
8
II. Building Number is not designated case:
Building Number is not designated in Call Prefix
①Input Building No. through key board.
EX) Building 101 Input 101
②Push (call) button.
③Input unit No. through key board.
Ex) Unit 101 Input 101
④Push (call) button.
⑤If access authorization is successful, Door is open with “Door is
open”voice message.
⑥If access is failed, warning sound is activated.
.
Picture5. Input password (PIN)
Intelligent Security & Fire Ltd.
9
4.3. Use password for accessing when system is OFF-Line
(No connection with Local server)
①Push (Key) button.
②Input PIN number.
③Push (call) button.
※This function is not activate when it is On-Line (possible to interface
with local server status).
※Please, should delete OFF-LINE PIN number when On-Line mode is
activated.
Intelligent Security & Fire Ltd.
10
5. Set up
Set up
①Push button.
②Input PIN number.
③Push (call) button.
※We recommend user change initial password (0000) then use products
for security.
※Initialize password: + “0000”+ + + + +
button map
※” “is DOT (.) for IP address typing.
Intelligent Security & Fire Ltd.
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de Commax
Commax
Commax CDV-40N Manual de usuario
Commax
Commax CDV-72UM Manual de usuario
Commax
Commax CM-800 Manual de usuario
Commax
Commax DP-2S Manual de usuario
Commax
Commax DRC-4BP Manual de usuario
Commax
Commax CIOT-L20MP Manual de usuario
Commax
Commax CDV-70UM Manual de usuario
Commax
Commax DRC-2ML/RF1 Manual de usuario
Commax
Commax CAV-51M Manual de usuario
Commax
Commax CDV-70KR3 Manual de usuario
Commax
Commax DR-2L Manual de usuario
Commax
Commax CDV-70UX Manual de usuario
Commax
Commax DRC-4BH Manual de usuario
Commax
Commax DP-4VHP Manual de usuario
Commax
Commax CMV-43A Manual de usuario
Commax
Commax DRC-703LC/RF1 Manual de usuario
Commax
Commax CAV-70BB Manual de usuario
Commax
Commax DRC-MSC Manual de usuario
Commax
Commax CDV-704MA Manual de usuario
Commax
Commax AP-5HM Manual de usuario
