OVERVIEW
The 32Button Adjunct Feature Module extends
the memory keys of your Executech II multiline
telephone by an additional thirty-two keys and
status lights. The keys can be programmed for
automatic dialing and/or direct station selection
(DSS) with busy lamp field (BLF).
This Module also provides an off-hook voice an-
nounce and handsfree answerback features.
With this capability, a second call can be an-
nounced to you while you are engaged on a call.
You can respond to the announcement, if neces-
sary, in a handsfree manner.
AuM DIAL &
DSS KEYS
7
DIRECT STATION SELECTION
BUSY LAMP FIELD (DSS/BLF)
OPERATION
DSS/BLF provides one-key intercom calling with
visual indication of station status.
To program DSS numbers,
l
Press ITCM on telephone. Listen for tone.
l
Dial 85 from telephone dial pad. Tone will
stop.
l
Press desired key on Module.
l
Dial extension number from telephone dial
pad.
l
Repeat previous two steps for all desired sta-
tions.
l
Press MONITOR on telephone when
programming is complete.
. Record DSS names or locations on supplied
reference card and install card on Module
faceplate.
l
Lift out plastic reference card cover from
Module faceplate.
0 Write or type names in squares on
reference card.
0 Install card under cover and snap cover
back into place on Module.
NOTE:
An autodial number also can be
programmed as a secondary function at every
DSSBLF memory location. See Automatic Dial-
ing instructions for details.
l%;$e announce a call to a DSS
,
l
Lift telephone handset.
l
Press key on Module.
l
Voice announce.
NOTE:
If you are transferring a call, the outside
line is automatically placed on hold when a DSS
key is pressed.
To tone signal a call to a DSS number,
0 Lift telephone handset.
0 Press key on Module.
. Press ITCM on telephone. When station
answers, two-way conversation can take
place.
The BLF lights that are adjacent to the DSS
keys on the Module indicate the status of the sta-
tions programmed at the keys. Status condi-
tions are as follows:
BLF STATUS STATION STATUS
Light Off
Light Flashing
Station Idle
Station calling you on
intercom line.
Light On Steady Station busy.
Station in do not dis-
turb mode.
Light Flutters Station has left call-
back message.
AUTOMATIC DIALING
Auto dialing provides one-key calling of often
used numbers and access codes.
To store a number for automatic
dialing,
l
Press ITCM on telephone. Listen for tone.
l
Press SAVE on telephone. Tone will stop.
. Press desired key on Module. Listen for fast
tone bursts.
-or-
. If desired key is also programmed for
DSS/BLF operation (as described pre-
viously),
l
Press HOLD on telephone and then press
desired Module key.
l
Listen for fast tone bursts.
l
Select specific line, line group, or no selection
as required.
