Cole Parmer TA-225.C Guía del usuario
TA and TT
Start up Guide
Balance Series
1. CONTENT
Balance
x 1
Power adapter
x 1
Centring ring
x 1
Bottom insert
x 1
Models: TA-225.C | TA-64
Weighing pan
x 1
Draft shield
x 1
Weighing pan
x 1
Balance
x 1
Power adapter
x 1
Draft shield
x 1
Bottom insert
x 1
Models: TA-164.C | TA-224.C | TA-314.C | TA-164 | TA-224 | TA-314
Weighing pan
x 1
Balance
x 1
Power adapter
x 1
Draft shield
x 1
Grounding foot
x 1
Foot
x 3
Models: TT-363.C | TT-603.C | TT-1003.C | TT-363 | TT-603 | TT-1003
Weighing pan
x 1
Weighing pan
x 1
Balance
x 1
Foot
x 3
Grounding foot
x 1
Models: TT-2102.C | TT-4502.C | TT-2102 | TT-4502 | TT-6001 | TT-10001
Balance
x 1
Foot
x 1
Draft shield
x 1
Grounding foot
x 1
Models: TT-6002.C | TT-6002
Power adapter
x 1
Power adapter
x 1
Balance
×1Weighing pan ×1Draft shield
1 ×1
Power adapter
x 1
Models: TT-10102.C
2. WORKROOM AND BASIC OPERATION GUIDELINES
3. UNPACKING
Place the balance away from heat
sources. Avoid exposing the balance
to the sunlight.
Avoid air drafts and air movements
at the workstation.
Avoid exposing the balance to a
magnetic field. Do not weigh
magnetic substances.
Make sure that the balance is placed
on an even surface.
Do not place the balance in a hazardous
area. Do not weigh explosive materials.
Do not place the balance on an unstable
ground exposed to shocks and vibrations.
+104oF
+40 oC
+50oF
+10 oC
Operate the device in a room where the temperature ranges between 10–40 °C
(50–104 °F) and where the relative humidity is below 80%.
Place the balance on a solid surface to ensure stability. To obtain stable and
repeatable weighing results, an anti-vibration table is recommended.
Keep the packaging should a warranty
claim or service be required.
TOP
1 2 3
1 2
Models: TT-363.C | TT-603.C | TT-1003.C | TT-2102.C | TT-4502.C | TT-6002.C | TT-363 | TT-603 | TT-1003 |
TT-2102 | TT-4502 | TT-6001 | TT-10001
Models: TT-363.C | TT-603.C | TT-1003.C | TT-2102.C | TT-4502.C | TT-6002.C | TT-363 | TT-603 |
TT-1003 | TT-2102 | TT-4502 | TT-6001 | TT-10001
4. ACTIVITIES TO BE DONE PRIOR TO OPERATION
4.1. Remove transport lock
Models: TA-225.C | TA-164.C | TA-224.C | TA-314.C | TA-64 | TA-164 | TA-224 | TA-314
Grounding foot
Keep the transport
lock should a
warranty claim or
service be required.
Keep the transport
lock should a
warranty claim or
service be required.
Check the grounding spring.
Make sure that the grounding
spring juts slightly out of the
hole.
Check the grounding spring.
Make sure that the grounding
spring juts slightly out of the
hole.
4.2. Grounding spring check
Models: TA-225.C | TA-164.C | TA-224.C | TA-314.C | TA-64 | TA-164 | TA-224 | TA-314
12
5. COMPONENTS ASSEMBLY
234
1 2 3
1 2 3
1 2
1 2 3
1
Install the
grounding foot
in a freely
selected
opening.
Install the
grounding foot
in a freely
selected
opening.
Install the
grounding foot
in a freely
selected
opening.
Models: TT-6002.C | TT-6002
Models: TT-2102.C | TT-4502.C | TT-2102 | TT-4502 | TT-6001 | TT-10001
Models: TA-164.C | TA-224.C | TA-314.C | TA-164 | TA-224 | TA-314
Models: TA-225.C | TA-64
Models: TT-363.C | TT-603.C | TT-1003.C | TT-363 | TT-603 | TT-1003
1
Models: TT-10102.C
2
6. PREPARING FOR WORK
6.1. Balance temperature stabilization time
Prior to switching the device on,it is necessary
to ensure that ithas reached a temperature
equal to room temperature.
Connect the power adapter to DC connector. Connect the power adapter to the mains.
To level the balance, turn its feet and keep
turning the feet until the air bubble takes
the central position.
Balance temperature stabilization time ranges
between 1 - 8 hours.
BUS 1 USB 2
Ethern
7. PANEL AND SCREEN
Switching on / off
Confirming an operation
or printing a report
Zeroing
Displaying previous
screen
Taring
Proximity sensor
Proximity sensor
Entering balance
setup
7.1. Panel keys
7.2. Home screen
Status bar
Editable information fields
(labels, text fields and buttons)
Editable tool bar with quick
access keys
Weighing result window
Parameters Header
printout
Footer
printout
Adjustment Tare UnitsUnits Operators
database
Databa-
ses
Working modes list List of current working
mode functions
8.1. Adjustment-TA.C AND TT.C Models
8. BASIC OPERATIONS
2
1
Press "Adjustment" button. Wait for the process completion.
Mass
standard [g]
1 000
2 000
5 000
5 000
10 000
TT-1003
TT-2102
TT-4502
TT-6002
TT-6001
TT-10001
Balance
model
Mass
standard [g]
50
100
200
200
200
500
TA-64
TA-124
TA-214
TA-314
TT-363
TT-603
Balance
model
Prior adjustment prepare the right
mass standard. You are recommended
to use mass standard of class F1 or F2.
View the table and select the mass
standard you need.
External adjustment is carried out using an external
mass standard of the right accuracy and weight
value, which value depends on balance type and
capacity.
8.2. Adjustment-TA AND TT Models
21
Press "Adjustment" button. Unload the weighing pan and press
button for confirmation.
43
Load the weighing pan with mass standard and
press button for confirmation.
Wait for completion of the start mass
determination process.
1 000
8.4. Taring
21
Unload the weighing pan and press
"Zeroing" button.
The balance has been zeroed.
The balance has been tared.
21
When the weighing result has been displayed
press "Tare" button.
Wait for the process completion. Unload the weighing pan.
8.3. Zeroing
56
Otros manuales para TA-225.C
1
Este manual sirve para los siguientes modelos
21
Tabla de contenidos
Otros manuales de Escala de Cole Parmer
Cole Parmer
Cole Parmer B2 Series Guía del usuario
Cole Parmer
Cole Parmer Balance LA Series Guía del usuario
Cole Parmer
Cole Parmer IPSW Series Manual de usuario
Cole Parmer
Cole Parmer MB-800 Series Manual de usuario
Cole Parmer
Cole Parmer LB-200 Series Manual de usuario
Cole Parmer
Cole Parmer TA-225.C Manual de usuario
Cole Parmer
Cole Parmer CS-200 Manual de usuario
Cole Parmer
Cole Parmer PBL-602 Manual de usuario
Cole Parmer
Cole Parmer IBS-200 Manual de usuario
Cole Parmer
Cole Parmer IPSW-400 Series Manual de usuario
