Cobra 7700 PRO Instrucciones de montaje
7700 PRO
Operating Hints (Rev. 5)
INSTALLATION
1 - Installation Hints
SYSTEM SET-UP
2 - Setting up a truck
3 - Description of weight settings
4 - Description of length settings
USING THE MAP SCREEN
5 - Panning
6 - Restriction S mbols
NAVIGATING
7 - Entering an address
8 - Entering an intersection
9 - Navigating to a cit (no specific address)
10 - Preview a route (starting from our current location)
11 - Preview a route (starting from a different location)
12 - Viewing the turn list (while ou are following a route)
13 - Changing the route criteria after ou have programmed a destination
14 - How to do a detour
15 - Stopping a trip
16 - Adding an intermediate destination
17 - Multi-Route
18 - How to tap on the map screen and save the location into the address book
POINT OF INTEREST (POI)
19 - Searching for POIs
20 - How to show / hide POI icons on the map screen
SOFTWARE & DATABASE UPDATES
21 - How to check the software version and update the software
22 - How to check the map version and update the maps
SECURITY OPTIONS
23 - S stem Securit Code
24 - Configuration Securit Code
MISC
25 - The STAA National Network
26 - Adjusting the volume
27 - Viewing our “current location”
28 - Observing satellite lock status
29 - Viewing the elevation
30 - Power light status
31 - Backing up the Address Book
TROUBLESHOOTING
32 - It sa s “Some of the roads on this route are not on the National Network”
33 - Poor routing
34 - It sa s “Route Calculate Failure”
35 - M unit will not turn on
36 - How can I tell whether I am receiving satellites?
37 - Auto-brightness is not working properl
38 - I do not see POI icons on the map screen
39 - Trouble locking onto satellites
40 - How to do a Master Reset
1) Insta ation Hints
Make sure to clean the windshield and suction cup before installation. Use glass cleaner or
rubbing alcohol.
To attach the bracket to the windshield:
1. Make sure the locking lever is in the UP position
2. Lightl moisten the suction cup
3. Firml hold the suction cup against the windshield
4. Push the locking lever.
The 7700 PRO comes with a rubber bumper to protect our dash. If ou let the unit rest on
the dash, stick the rubber bumper onto the bottom of our unit.
The GPS antenna is located at the top of the unit. During installation, arrange the mounting
bracket so that it does not block the top of our unit.
Using the Mounting Disc
Note: The adhesive pad is a separate piece. The pad must first be stuck to the disk.
1. Find a flat part of the dash to attach the mounting disc.
2. Clean the dash with the enclosed alcohol pad.
3. Clean the DULL side of the mounting disk with the alcohol pad (not the shin side).
4. Peel the backing from one side of the adhesive pad and then press the pad onto the DULL
side of the mounting plate.
5. Peel the other backing from the adhesive pad and then press the mounting plate into position
on the dash.
6. Clean both the mounting plate and the suction cup with the alcohol pad.
7. The mounting bracket (suction cup) can now be attached to the mounting plate.
Once the p ate is insta ed, it CANNOT be reused!
NOTE:
To create a secure mount, the plate uses a strong adhesive. Please note that should ou ever want
to remove the plate, it might leave a mark on our dash. So please decide in advance whether
ou reall want to use it.
<back to menu>
2) Setting up a truck
1. Tap an where on the map screen.
2. Tap on CONFIGURE.
3. Tap on TRUCK.
You should now be at this screen:
Scroll through the pages to find our truck. After selecting the truck ou will get this screen:
You can accept the default settings, or ou can change them. To make a change, simpl tap on
one of the fields.
If ou are hauling hazardous material, then be sure to change the LOAD TYPE.
There are a lot of numbers for weight and length. If ou tap on the weight field or the length
field ou will see a breakdown. The next 2 pages gives an explanation of the different choices.
<back to menu>
3) Description of Weight Settings
Gross vehic e weight: The total weight of the truck when it is loaded.
Weight per ax e: You must calculate this using standard, accepted methods.
Tandem ax e weight: The weight on the double-axle at the back of the truck.
Tridem ax e weight: The weight on the triple-axle (see images below).
Un aden vehic e weight: The total weight of the truck when the trailer is empt .
<back to menu>
5) Panning
STEP 1 – Tap on the black bar at the top of the map screen
STEP 2 – Tap on the crosshair icon
Your screen should now look similar to this:
► To pan, drag our finger across the screen.
► Tap on the + and – buttons to zoom in and out.
► To exit, tap on the arrow in the lower-right corner.
For info about the QUICK MENU, please click <HERE>.
<back to menu>
6) Restriction Symbo s
When driving in truck mode, a “restriction s mbol” ma occasionall appear on the map screen.
The s mbol is a warning of an impending truck restriction. The distance will count down to the
restriction. These are the t pes of restrictions ou ma encounter:
• Truck height
• Truck length
• Truck width
• Weight limit
• Load t pe (for example, restrictions on hazardous materials)
Here is a sample warning:
In the above example, there is a 12.5 foot height restriction which will happen in 446 feet.
It is probabl a low bridge!
You should not encounter man restriction s mbols when following a route, because the
7700 PRO is designed to calculate a route that avoids an restrictions. However if ou are just
driving without following a route, then ou ma encounter restriction s mbols.
Here are the different s mbols:
The following page shows one more s mbol.
Tabla de contenidos
Otros manuales de GPS de Cobra
Cobra
Cobra 5550 PRO Manual de usuario
Cobra
Cobra NavOne 2500 Manual de instrucciones
Cobra
Cobra NavOne 2100 Manual de usuario
Cobra
Cobra NavOne 3000 Manual de servicio
Cobra
Cobra AURA SL3 Manual de usuario
Cobra
Cobra AURA SL3 Manual de usuario
Cobra
Cobra GPS100 Manual de usuario
Cobra
Cobra GPS 1080 Manual de usuario
Cobra
Cobra GPSM2500 Manual de usuario
Cobra
Cobra GPS 100 S Manual de usuario
Cobra
Cobra NavOne 3000 Manual de usuario
Cobra
Cobra 8500 PRO HD Manual de usuario
Cobra
Cobra 5600 PRO LM Manual de usuario
Cobra
Cobra NavOne 2000 Manual de usuario
Cobra
Cobra 8000 PRO HD Manual de usuario
Cobra
Cobra GPS1000 Manual de usuario
Cobra
Cobra 6000 PRO HD Manual de usuario
Cobra
Cobra NAV ONE 2200 Manual de usuario
Cobra
Cobra 6100 Pro HD Manual de usuario
Cobra
Cobra NAVONE NAVONE 5000 Manual de usuario
