CNB XNET IDC4000T Manual de usuario

Ver. 1.02

XNET

(IDC4000T/IVC4000T)

User Manual

XNET User Manual

2 / 30

About this Manual

A compatibility and durability test ensures this product’s high performance.

This manual is for XNET Network product users only, and it describes operations related to XNET

Network products.

Please read this manual thoroughly paying attention to cautions and warnings before using the

product even if you have used similar products before.

Important Notices

zThe copyright of this manual is owned by CNB Technology Inc.

zIt is illegal to copy and distribute this manual without permission.

zDamages caused by use of parts not recommended and by misuse will not be applicable for

support.

zContact the store or the manufacturer immediately if (you think) there is any problem with the

product.

zContact the store or the manufacturer before disassembling the product for alteration or repair.

zXNET is a trademark of CNB Technology Inc.

zThis product complies for CE (Europe) and FCC (USA) regulations for industrial/home use

electrical device.

XNET User Manual

3 / 30

Index

1. System Administration.......................................................................................................4

1.1. Logging On ..............................................................................................................4

1.1.1. Using Internet Explorer...................................................................................4

1.1.2. ID and Password.............................................................................................4

1.2. Web Viewer ..............................................................................................................6

1.3. Status Window .........................................................................................................8

1.4. Configuring Users ....................................................................................................9

1.5. Setting Date & Time................................................................................................11

1.7. Generating Log Report ...........................................................................................15

1.8. Configuring Video ..................................................................................................16

1.9. Configuring Camera Condition ...............................................................................18

1.10. Configuration Audio............................................................................................21

1.11. Configuration the Network(TCP/IP) parameters ...................................................22

1.12. Configuration DDNS............................................................................................24

1.13. Configuration RTP/RTSP.....................................................................................25

1.14. SMTP Setup ........................................................................................................26

1.15. FTP Setup ...........................................................................................................27

1.16. Configuration Motion Detection area...................................................................28

1.17. Configuration Event Type....................................................................................29

1.18. Configuration Sensor / Alarm ..............................................................................30

XNET User Manual

4 / 30

1. System Administration

1.1. Logging On

You can log on as an administrator using either Internet browser or ‘CNB CMS’ software. (This manual

will describe about using Internet browser only.)

1.1.1. Using Internet Explorer

Type the IP Address of the XNET product in the address bar and press enter.

e.g.) : http://192.168.123.100

For your convenience, Internet Explorer 8 is recommended.

If the HTTP port has been changed from the default value, enter the new port as shown below:

IP Address of the XNET:Port No.

e.g.) : http://192.168.123.100:8080

1.1.2. ID and Password

If you are logging in as an administrator, the Log-In box will appear as shown in figure 1-1. Basic

Setup page will appear when you enter id and password.

Figure 1-1

XNET User Manual

5 / 30

The default user name and password is “root” and “admin” respectively.

shown in Figure 1-2. Setup pages for different features can be

accessed from this page. Access to each feature are controlled by

different For security purpose, it is recommended to change the

administrator’s id and password from their default values. Please be

careful not to forget them or expose them to others. Please refer to

[1.5] for detail.

If you forget the administrator’s password, “Factory Reset” is the

only way to regain access. However, since this will retrieve all

default settings, you need to configure the network settings using

IP installer software again.

XNET User Manual

6 / 30

1.2. Web Viewer

When you access an XNET product, Web Viewer page will appear automatically. Viewer area displays

the video output from the camera, and menu bar contains taps that lead to each feature setting page.

Figure 1-2

If Live View page is broken, press the refresh button(F5) of Internet

Explorer.

XNET User Manual

7 / 30

Item Sub Item Descritption

Capture -

Captures the still image.

My Document₩XNetCapture (2000, XP)

Document₩XNetCapture (Vista, 7)

Setting -

Opens up Basic Setup Page.

Setup page for each XNET feature can be opened

from this Menu screen.

(Please refer to 1.4 for detail)

Live View -

Opens up Index View page.

Index View Page will display Video as well as

setting up Stream

Stream Service - Main Stream Video is displayed. (MPEG4, MJPEG)

Table 1-1

XNET User Manual

8 / 30

1.3. Status Window

Status page displays XNET System’s Version and its Ethernet address.

Click [Status] button to open the page shown in Figure 1-3.

Figure 1-3

XNET User Manual

9 / 30

1.4. Configuring Users

This can give or limit authority to users for controlling Video and other features of XNET system.

Click [Users] button to open the page shown in Figure 1-4.

Figure 1-4

XNET User Manual

10 / 30

Item Sub Item Description

User List

[User

Group]

User Name

Displays list of registered users.

"root" is the system’s administrator. "root" cannot be added or

deleted. Only the password for “root” can be changed.

Add/

Modify

User

Adds a new user.

Select “[Add_User]” tap in User List Box. To add a new user, enter

User name, Password, and User group then click Add button.

Updated User list can be viewed in User List Box.

- Up to 10 users can be added.

- Authority of different User Groups

Administrator : Full control of the XNET system.

Operator : Control over Viewer, Audio&Video Setup, and

Event Configuration.

Viewer : View camera’s video signal only.

Modifies information for each user.

Select a user in User Listbox, enter new Password/ User Group,

and click modify button to save the changes.

Updated detail can be viewed in User List Box.

Delete

Removes a user.

Select a user in User Listbox and click remove button to remove.

Updated user list can be viewed in User List Box.

User

Setting

Enable

Anonymous

Viewing

(Log-in Not

Required)

Helps with use of the Live View page without login if you selected

this item.

Language English /

Chinese Applies the selected language to XNET’s webpage.

Table 1-2

Registration of users is available up to 10 persons.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de CNB

CNB

CNB XNET IVC5055VR Manual de usuario

CNB

CNB XNET IVC5055VR Manual de usuario

CNB

CNB LDM-24VF Manual de usuario

CNB

CNB XPEED SDN-22Z27F Manual de usuario

CNB

CNB NB21-7MHR-6 Manual de usuario

CNB

CNB AN200L Manual de uso y cuidado

CNB

CNB XNET IGP1030 Manual de usuario

CNB

CNB IXP3035VR Manual de usuario

CNB

CNB XNET ITE1030 Manual de usuario

CNB

CNB XPEED Indoor Series Manual de usuario

CNB

CNB IGC2050F Manual de usuario

CNB

CNB XNET IGP2035F Manual de usuario

CNB

CNB V4760N Manual de usuario

CNB

CNB LKC1050IR Manual de usuario

CNB

CNB TBN22R Manual de usuario

CNB

CNB ALPHA 300 Manual de usuario

CNB

CNB IDC4050IR Manual de usuario

CNB

CNB SKB-20Z12F Manual de usuario

CNB

CNB IVP5035VR Manual de usuario

CNB

CNB XNET IBP5030CR Manual de usuario

CNB

CNB DBM-24VF Manual de usuario

CNB

CNB IDC4050IR Manual de usuario

CNB

CNB IPM3063N Manual de usuario

CNB

CNB XNET IGP1030 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario