CMTech CA-K20MT Manual de usuario
USER’S MANUAL
CA-K20MT
CM Tech Co., Ltd.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
FCC RF INTERFERENCE STATEMENT
Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician
for help.
■
Caution ( )
Do not change or modify the product without permission or authority of
manufacturer. It may cause undesirable operations, permanent damages or
harmful interferences.
◎
Notice ( )
·
Design and specification are subject to change without notice for product improvement
purposes.
◎
Functions
-
Multi Format Audio Player [MP3 / WMA]
-
FM Radio / FM Broadcasting Recording
-
Voice Recording
-
External Data Storage [Plug & Play]
-
TTS 2.0 [Text To Speech]
-
Song Title Display
◎
PC System Requirements
·
Processor: Pentium 233MHz or better
·
Windows98 / 98SE / ME / 2000PRO / XP
·
Hard Disc: 1GB or more available
·
Memory: 64MB DRAM or better
·
Monitor Resolution: 1024 x 768, 16Bit Color or better recommended
·
USB Port mounted
·
CD-ROM drive to install Software
◎
Description of Product Part
·
Front [fig-e01]
·
LCD Screen / Menu Button / Volume Control Button / Rewind Button / Fast Forward Button /
Play/Pause Button
·
Rear [fig-e02]
·
Earphone Jack / Microphone / Necklace Holder / Battery Cover / USB Jack / Hold Switch
◎
Direction of USB Cable Connection
[fig-03]
◎
Accessories
-
User’s Manual
-
Installation CD
-
USB Cable
-
Small-sized USB Adaptor
-
Earphone (FM Antenna Embedded)
-
Carrying Case / Battery 1 (1.5V AAA Type)
FM radio reception sensitivity could be lowered when other earphones than the provided one
are used.>
◎
USB Port Inspection
1. Before program installation, please inspect the USB port first.
2. Execution Order : 'My Computer
→
View system information
→
Hardware
→
Device Manager'
3. Check if there is ‘Universal Serial Bus Controllers’ in the device controller list.
4. It will be displayed as ‘General Serial Bus Controllers’ or ‘Universal Serial Bus
Controllers’ depending on the PC environment. [fig-e04]
5. USB port cannot be used if there is no 'Universal Serial Bus Controllers'. In such a case,
please ask the sales agent of your PC for its service before installation.
◎
Program Installation
·
Before installation, please disconnect other USB products connected to the USB port.
·
Do not connect the product to your PC until successfully installing the program. If you
have already connected the product to your PC, disconnect it before proceeding.
·
This manual is based on Windows XP. Appearance can be different depending on the version of
Windows you are using.
1. Insert the supplied CD-ROM into the CD-ROM drive of your PC. The dialog box shown below
should appear. If the installation program does not start automatically, double-click
‘Install.exe’ of the CD. [fig-e05]
2. Click the ‘Install’ button on the picture to begin installation. Select the ‘MP3
Driver+TTS’ button to use the TTS function. (Usually it takes about 5 minutes if TTS is
selected. The necessary time is somewhat different depending on the PC environment.)
3. Click "Next"
→
"Finish" to complete the installation and restart your PC. [fig-e06] [fig-
e07]
4. After your PC has restarted, you will see the 'Live Music_K Explorer' icon on your PC.
5. With the battery installed in the product, connect the product to the USB port on your PC,
and then press the '
▶
/
■
' button to turn on the product.
6. Execute 'Live Music_K Explorer' and a window will appear as shown below. [fig-e08]
◎
Program Deletion
1. If the product is already connected to your PC, disconnect it.
2. Execute “Control Panel”
→
“Add or Remove Programs” to see a list of the installed programs.
3. Search the list for 'Live Music_K' and click on the “Change/Remove” button. A window will
appear as shown below. Select the "Remove" button, and then click "Next", "OK" and “Finish”
to complete the deletion. Restart your computer after deletion. [fig-e09] [fig-e10] [fig-e11]
[fig-e12]
4. If the installation was not successful or if you need to reinstall the program for any
reason, follow the program deletion procedure and put the CD-ROM in for installation.
·
If you want to delete the TTS program, execute 'Controller'
→
'Add or Remove Programs’.
Then search the list for 'TTSPad 2.0' and click “Change/Remove” to start deleting.
◎
Formatting (After installing the program)
1. Please execute formatting periodically for the efficient use of the memory.
2. Format the removable disc drive to delete all the files and initialize the drive.
3. With the battery removed from the product, connect the product to the USB port of your PC
and press the '
▶
/
■
' button to power up the product.
4. Execute “Start
→
Programs
→
Live Music_K Audio Player
→
Live Music_K Format” on your PC.
The format window will appear as shown below. Click “Start” to start formatting. [fig-e13]
5. When formatting is completed, press the 'Close' button to close the formatting window.
[fig-e14]
6. After formatting, disconnect the product from your PC and put the battery in it. Then
press the '
▶
/
■
' button and check if the power is on before you connect it to your PC again to
use.
◎
Updating (After installing the program)
1. Update the firmware of the product.
2. With the battery removed from the product, connect the product to the USB port of your PC
and press the '
▶
/
■
' button for more than 10 seconds.
3. When the “Found New Hardware Wizard” appears as shown below, click "Next"
→
"Finish". [fig-
e15] [fig-e16]
4. After installation is completed, check if there is 'Player Recovery Device Class' in the
device controller. (Device controller : My Computer
→
View system information
→
Hardware
→
Device Manager) [fig-e17]
5. Click “Start”
→
“Program”
→
“Live Music_K Audio Player”
→
“ Live Music_K Update”. When a
window appears as shown, click “Next”
→
“Finish”. [fig-e18] [fig-e19]
6. The update window will appear as shown below. Then click “Start” to start updating. (In
case of Window98/98SE, you need to click “Start”
→
“Programs”
→
“Live Music_K Audio Player”
→
“Live Music_K Update” again to see the update window. [fig-e20]
7. When updating is completed, press the “Close” button to close the update window. [fig-e21]
8. To use the program, disconnect the USB cable from the product, wait 10 seconds, and then
reconnect the USB cable to the product. When the "READY" message appears on LCD, start 'Live
Music_K Explorer' on your PC. If you do not disconnect and reconnect the USB cable, the
program will not run.
9. Always use the Format utility according to the “formatting procedure” after updating.
10. The pictures may be different in case of Window98 / 98SE.
·
The update as above is only for the initial installation. If you update 2 or more times in
a PC, the 3
rd
and 5
th
items will not appear.
·
When a removable disc appears in My Computer, please click the right button of the mouse to
start formatting.
◎
How to Download a Music File to the Product
1. With the battery installed in the device, power up the device and connect it to the USB
port on your PC.
2. When the "READY" message appears on the LCD, click the 'Live Music_K Explorer' icon on your
PC to launch the program. [fig-e22]
Tabla de contenidos
Otros manuales de Reproductor de MP3 de CMTech
