CMITECH NOVA-TS2 Manual de usuario

NOVA-TS2 User Guide

Version 1.0, August 2021

About This Manual

NOVA-TS2 is an advanced face recognition terminal that provides highly accurate face

recognition in an embedded system with the built-in thermal sensor that provides elevated body

temperature detection. This manual contains the descriptions and operational instructions for

NOVA-TS2 device. It is intended and written for system administrators who are in charge of

overall operation including installation and management. We recommend you familiarize yourself

with this manual in order to make use of the product correctly and effectively.

•The figures and screenshots in this guide are given for illustration purposes

only and may differ from the actual product.

•Due to continuous technological improvements, the guide may not contain

the most updated information. For further information not covered in this

guide, please contact us at [email protected].

Revision History

Version Date Description Note

0.1 2021-06-18 1st draft

www.cmi-tech.com

ii of 35 NOVA-TS2 User Guide, 1.0

August 2021

Conventions in This Manual

The following symbols are used throughout this manual. Make sure that you fully understand

the meaning of each symbol and follow the instructions accompanied.

Symbol Name Description

WARNING

Indicates information that should be followed with the

utmost care. Failure to comply with a warning could

cause severe damage to the equipment or injury to

personnel.

CAUTION Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,

performance degradation, or unexpected results.

IMPORTANT Emphasizes essential information required for user

success.

NOTE Provides important supplemental information that might

enhance users' understanding or alternative steps to

accomplish their goals.

TIP Provides optional information to help users be more

successful in their tasks.

NOVA-TS2 User Guide, 1.0

August 2021 Page

iii of 35 www.cmi-tech.com

Safety Instructions

Follow the safety instructions to use the product safely and prevent any risk of personal injury or

damage to the product.

WARNING

Choosing Location

•DO NOT expose the product to direct sunlight, excess heat, open flames, corrosive

gasses, moisture, or dust. Doing so may cause electrical shock, electrical short, or fire.

•DO NOT install the product near heaters, air conditioners, electrical fans, refrigerators, or

water. Doing so may create the risk of a short circuit or fire caused by water or

condensation that may come into contact with the product.

•DO NOT install the product in an environment that is susceptible to explosion.

Operation

•DO NOT let any type of liquid, mists, or sprays get into the product. Doing so may cause

electrical shock, electrical short, or product damage.

•If smoke, odors or noise rise from the device, stop using the device immediately,

disconnect the power cable, and contact our customer support.

Maintenance

•DO NOT attempt to dissemble, repair, or modify the device yourself. Opening or

removing covers may expose you to electrical shock or other risks and may void your

warranty. If the product does not work correctly, contact your dealer or our customer

support.

CAUTION

Choosing Location

•Keep the front side of the device away from strong ambient light, direct sunlight, or both.

Sunlight, halogen lamps or other strong illumination may degrade the performance of the

device, that is, increase in failure-to-capture rates or occasional authentication problem.

•DO NOT install the product outdoors unless environmental factors such as water,

temperature, or sunlight in the location are controlled by means of proper protection.

•DO NOT expose the product to high electro-magnetic radiation. Device failure or

performance degradation may occur caused by electro-magnetic interference.

•DO NOT install the product next to devices that contain magnets or generate magnetic

fields such as speakers. Device malfunction or performance degradation may occur

caused by magnetic interference.

www.cmi-tech.com

iv of 35 NOVA-TS2 User Guide, 1.0

August 2021

Installation

•DO NOT install the product on a surface subject to vibration or physical shock. Doing so

can cause damage to the product.

•When you install the product on a wall, make sure that you secure the product with the

provided fasteners. Dropping from the wall may cause damage to device casing, internal

parts, or both.

•DO NOT install the power supply cable in a high-traffic area where people pass by. Doing

so may create a trip hazard and cause the cable to become worn or frayed.

•Use only a power cord set complying with the national regulation of the countries

intended for sale.

•Use only the power adapter which is either provided or approved by CMITECH for the

product to operate properly and safely.

•DO NOT connect multiple devices to one power adapter. Overload on power adapter

may cause over-heat or fire hazard.

•DO NOT use any type of extension cord to connect the product to a power supply.

Operation

•DO NOT use any sharp tools when pressing the buttons to prevent damage to the touch

screen from scratches or cuts.

Maintenance

•When cleaning the product, wipe the product with a soft and dry cloth. Do not apply

water, benzene, alcohol, or spray cleaner. These may cause product failure or fire.

NOVA-TS2 User Guide, 1.0

August 2021 Page

v of 35 www.cmi-tech.com

Contents

About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Êii

Revision History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Êii

Conventions in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Êiii

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Êiv

1. Introduction to NOVA-TS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

1.1. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

1.2. Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê2

1.3. Operating Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê4

1.3.1. Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê4

1.3.2. Schematics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê6

2. Installing NOVA-TS2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê8

2.1. Installation Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê8

2.1.1. Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê8

2.1.2. Electrical Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê9

2.1.3. Tool Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê10

2.2. Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê11

2.2.1. Mounting Device (Wall Mount). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê11

2.2.2. Mounting Device (Gang Box Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê13

2.2.3. Connecting Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê14

3. Using NOVA-TS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê19

3.1. Enrollment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê19

3.2. Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê20

4. Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê22

4.1. Mechanical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê22

4.1.1. Dimensions (unit: mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê22

4.2. Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê23

4.2.1. Face recognition terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê23

4.2.2. Thermal Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê24

4.2.3. Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê25

4.3. Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê26

Appendix A: OSD Menu List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê27

A.1. User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê27

A.2. Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê27

A.3. Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê29

A.4. Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê30

A.5. Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê30

www.cmi-tech.com

vi of 35 NOVA-TS2 User Guide, 1.0

August 2021

A.6. Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê31

Appendix B: Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê32

B.1. Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê32

B.2. Copyright Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê33

Appendix C: Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê34

C.1. Certification and Safety Approvals FCC Compliance Statement . . . . . . . . . . . . . . . . . Ê34

Appendix D: Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê35

NOVA-TS2 User Guide, 1.0

August 2021 Page

vii of 35 www.cmi-tech.com

1. Introduction to NOVA-TS2

NOVA-TS2 is a face recognition terminal that provides face recognition in an embedded system

with real-time subject finding and local authentication for high throughput access control and

time & attendance applications. The built-in thermal sensor provides infrared imaging

technology for detecting elevated human body temperature.

1.1. Features

The key features of NOVA-TS2 are shown in the following table:

Feature Description

Advanced real time subject

tracking with simple user

instructions

NOVA-TS2 accurately locates the subject face in real time

and tracks in 2 sides of angle to provides wider and deeper

positioning.

Wide angle face imaging for

outstanding capture volume Allows height range of 145 to 210 cm

Utilization of ultra-high

performance face matching

engines

Advanced, dedicated co-processor allows utilization of latest

and most powerful face algorithms.

Supplemental display of

authorization results Can display authorization decision when coupled to access

control provisioning logic so that “subject recognized, but not

granted permission” information can be displayed.

Supports multiple languages in

GUI English, Korean, Simplified Chinese, Traditional Chinese,

Japanese, Arabic, Spanish, Italian, Turkish, French

Large on-board (embedded)

face template database Store up to 20,000 active face templates on-board in 1:1

recognition (verification) identification mode. Store up to

20,000 active face templates on-board in 1:N identification

mode.

High speed face matching Can provide up to 20,000 matches per second on-board.

Use in widest range of lighting

conditions Embedded illuminators in both white and NIR ranges expand

use in adverse ambient light environments.

Standard multi-band RFID

reader MiFare, DesFire, FeliCa card support with standard

embedded ISO/IEC 14443 reader.

Full range of deployment

options Standard connections in include selectable Wiegand IN or

OUT, GPI, RS 485, and contact relay.

Fully compatibility with CMITech

CMID Manager v2 access

control and T&A solution

software

Supports full integration with CMID Manager for distributed

access control and T&A solutions on single network.

Body temperature screening Detects elevated skin temperature using infrared

thermography against a probable fever.

www.cmi-tech.com

1 of 35 NOVA-TS2 User Guide, 1.0

August 2021

Feature Description

A variety of access control

options Combined with temperature screening and mask detection,

Nova-TS allows for a different level of access depending on

the application such as a thermal bypass mode without

authentication or a mask-wearer-only mode.

1.2. Components

Before you begin, make sure that all the following items are included with your device. If you

find anything is missing, contact your dealer.

NOVA-TS2 User Guide, 1.0

August 2021 Page

2 of 35 www.cmi-tech.com

Table 1. NOVA-TS2 component table

Name Quantity Description Note

NOVA-TS2 1 Face recognition terminal

Mounting Plate 1 Installs the unit on a wall or on an

outlet box

Quick Guide 1 Gives brief instructions and

information needed for product use

and installation

Diode 1 Prevents currents in unintended

directions (See Relay Connection for

an example of its use)

Cables

Power cable 1

Relay cable 1

GPI cable 1

Wiegand

cable 1

RS-485 cable 1

AC adapter 1 Output:

15VDC,

3.0A

Power code (optional) 1

www.cmi-tech.com

3 of 35 NOVA-TS2 User Guide, 1.0

August 2021

Tabla de contenidos

Manuales populares de Terminal táctil de otras marcas

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manual de usuario

Ingenico

Ingenico AXIUM EX4000 Manual de usuario

Heisei Electronics

Heisei Electronics Q-POS 815 Manual de usuario

Amano

Amano MTX-15 Manual de usuario

FLOWBIRD

FLOWBIRD CWT Compact Touch Manual de usuario

Demco

Demco SP7 Manual de usuario

Lathem

Lathem PC600 Series Manual de usuario

Partner

Partner MF-2352 Manual de usuario

NCR

NCR RealPOS 7460-2 Manual

Simrad

Simrad MS50 Instrucciones de montaje

Unitech

Unitech MR350 MKII Guía de inicio rápido

Jungheinrich

Jungheinrich WMT 210 Manual de usuario

Motorola

Motorola MTP850 Manual de usuario

YASKAWA

YASKAWA 62H-MDC0 Manual de usuario

MVG industries

MVG industries NeptuLink Manual de usuario

Price Industries Limited

Price Industries Limited FDC Manual de instrucciones

Honeywell

Honeywell TemaKey Manual de usuario

EBN

EBN BPC65-B-A16G Manual de usuario