Cloudworks CDS549 Manual de usuario

USER MANUAL : CDS549 STRATUS PULSE LOGGER

DOCUMENT NAME

CLASSIFICATION

DATE

PAGE

CDS549 STRATUS PULSE LOGGER USER

MANUAL

CONFIDENTIAL

21-JAN-21

1 OF 26

CDS549 Stratus Pulse Logger User Manual

Document Number:

CDS549 Stratus Pulse Logger User Manual

Client:

User

Date:

1 December 2020

Issue:

V1.0

Status:

Draft

Classification:

Confidential

S/W File Name

CDS549 Stratus Pulse Logger User Manual.docx

This document contains information relating to the rights of Cape Digital Solutions. The confidentiality

agreement provisions are applicable to this document. When no longer needed for authorised

purposes, this document must be destroyed or returned to Cape Digital Solutions.

Cape Digital Solutions reserves the right to change the design or specifications of their products

without prior notice.

The contents of this manual is the property of Cape Digital Solutions and may not be copied or modified

without prior permission, in writing, from Cape Digital Solutions, Cape Town, South Africa.

USER MANUAL : CDS549 STRATUS PULSE LOGGER

DOCUMENT NAME

CLASSIFICATION

DATE

PAGE

CDS549 STRATUS PULSE LOGGER USER

MANUAL

CONFIDENTIAL

21-JAN-21

2 OF 26

AMENDMENT HISTORY

Issue

Date

Amendment Details

Amended By

V01

1 9 January 2021

Compile document

Alex Romanov

USER MANUAL : CDS549 STRATUS PULSE LOGGER

DOCUMENT NAME

CLASSIFICATION

DATE

PAGE

CDS549 STRATUS PULSE LOGGER USER

MANUAL

CONFIDENTIAL

21-JAN-21

3 OF 26

Table of Contents

1CDS549 Stratus Pulse Logger.....................................................................4

1.1 Introduction...........................................................................................................................4

1.2 Features ...............................................................................................................................4

1.3 Specifications .......................................................................................................................5

1.4 Architecture ..........................................................................................................................6

1.5 Power Modes .......................................................................................................................6

1.6 LED and button functions.....................................................................................................7

1.6.1 LED functions...............................................................................................................7

1.6.2 Pushbutton Functions...................................................................................................7

1.7 Connections .........................................................................................................................8

1.8 External Power Supply / Solar System Connection.............................................................9

1.9 Using the pulse inputs..........................................................................................................9

1.10 Using the ECO interface.....................................................................................................10

1.11 Sim card and battery installation........................................................................................11

1.12 Installation considerations..................................................................................................12

2Logger Setup..............................................................................................13

2.1 Setup via Bluetooth Configure ...........................................................................................13

2.2 CDS549 Stratus Pulse Logger Setup via Remote Configure.............................................23

2.3 CDS549 Stratus Pulse Logger Setup via Offline Script Configure.....................................25

USER MANUAL : CDS549 STRATUS PULSE LOGGER

DOCUMENT NAME

CLASSIFICATION

DATE

PAGE

CDS549 STRATUS PULSE LOGGER USER

MANUAL

CONFIDENTIAL

21-JAN-21

4 OF 26

1CDS549 STRATUS PULSE LOGGER

1.1 Introduction

The Stratus Pulse logger is a robust, sophisticated 3G GSM logger/controller with a wide range of input capabilities, making

it ideal for a large number of measurement applications.

Communication to your own server and database can be achieved via the internet or a private APN. The software running

on these servers is supplied free of charge. The Stratus Pulse Logger has been designed to allow for easy installation and

setup without the need for a complicated server infrastructure. Setup and management software (CloudWorks) is also

supplied free of charge to allow clients to manage their own networks and data. There are no monthly charges for

collecting and hosting data as the client can provide this service themselves.

1.2 Features

Uses 3G/Edge/GPRS (UMTS/HSPA) technology. This has become essential as many cellular network providers

around the world will soon no longer be supporting older GPRS technologies, rendering legacy GPRS dataloggers

obsolete. This has already started happening in many countries around the world.

Bluetooth interface - setup and manual data collection can be achieved through the Bluetooth interface negating

the need for cables that invariable fail during continuous use.

Optional external power operation with battery failover.

Uses standard off-the-shelf alkaline batteries. This logger uses 3x standard D Cell alkaline batteries that can last in

excess of 5 years under normal usage. Many other loggers use lithium batteries that are expensive and difficult to

obtain. Other problems involving lithium batteries are the restrictions when shipping using airfreight. All lithium

batteries need to be shipped as hazardous cargo that is becoming increasingly difficult to achieve as many airlines

are no longer allowing these batteries on their aircraft.

2 x Pulse input ports - Pulse inputs are used on metering devices that supply a pulse output for a measured

amount of product.

ECO interface for connecting to GWF meters..

USER MANUAL : CDS549 STRATUS PULSE LOGGER

DOCUMENT NAME

CLASSIFICATION

DATE

PAGE

CDS549 STRATUS PULSE LOGGER USER

MANUAL

CONFIDENTIAL

21-JAN-21

5 OF 26

Large onboard non-volatile memory - This logger can record in excess of 14400 datalog records (application

dependent).

Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

transmitted at programmable intervals.

Remote programming of all setup parameters via GPRS link or SMS.

Ideal for leak detection, alarming to prevent water loss.

Onboard Bluetooth can stream diagnostic information about signal strength, network status etc.

Touch sensitive button and LED's for manual wakeup to server and diagnostic purposes etc.

1.3 Specifications

GPRS/EDGE/3G (UMTS/HSPA) Modem Technology

Bluetooth interface

Powered by battery or external 12V supply

Option of external power with battery failover and sleep

All management software supplied free

Standard Alkaline Batteries - 3 x D cells (5+ years)

2 x Pulse inputs

ECO interface for connecting to GWF electronic meters

Up to 14400 record datalog memory (application dependent)

Full SMS driven command set

Logging intervals 1 minute to 1 month

Rugged housing with seal eye

Touch sensitive button and LED Diagnostics

Configuration and diagnostics through Bluetooth interface

Fully configurable remotely

Stream data in real-time when powered by external supply

Size 185mm x 130mm x 55mm (including cable glands)

Housing Protection Class : IP68 - Max 1.2m, 30 days

Environment : -20°C to 80°C humidity = 90% non condensing. Check battery specifications for low power systems

Uses a Micro SIM card

USER MANUAL : CDS549 STRATUS PULSE LOGGER

DOCUMENT NAME

CLASSIFICATION

DATE

PAGE

CDS549 STRATUS PULSE LOGGER USER

MANUAL

CONFIDENTIAL

21-JAN-21

6 OF 26

1.4 Architecture

1.5 Power Modes

The Stratus Pulse Logger can operate in one of two power configurations.

Mains powered - in this mode the logger can be continuously connected to the server allowing for the streaming

of live data.

Battery powered - The Stratus Pulse logger uses standard 'D' Cell alkaline batteries that will last several years

depending on the operation. In this mode, the logger will 'wakeup' (adjustable - normally 6 hourly) and upload its

recorded data to a remote database.

External 12V (8-15V) 2A supply - in this mode the logger can be continuously connected to the server allowing for

the streaming of live data. Batteries can be fitted and the logger will automatically switch to battery mode should

the power fail.

Bluetooth

Interface

Central

Processor

3G GSM

Interface

Non volatile

memory

Input

Interface

3 x Alkaline

Batteries

External 12V

Power Supply

Power

Management

ECO Interface

2 x Pulse

Inputs

USER MANUAL : CDS549 STRATUS PULSE LOGGER

DOCUMENT NAME

CLASSIFICATION

DATE

PAGE

CDS549 STRATUS PULSE LOGGER USER

MANUAL

CONFIDENTIAL

21-JAN-21

7 OF 26

1.6 LED and button functions

On the front of the logger, there are 2 LED's and a touch sensitive 'SELECT' button. Internally on the reverse side of the lid

is the Bluetooth reset button.

1.6.1 LED functions

Blue LED - Bluetooth status

Flashing indicates the Bluetooth is ready to receive an incoming connection

Solid light indicates and active connection

Red LED - Logger status

Solid - Logger is in Command Mode (normally accompanied by an active Bluetooth connection)

Fast flash - Logger is currently initiating a connection to the server

Slow Flash - Connection has been established to the server

1.6.2 Pushbutton Functions

SELECT touch button - Please note, this button is touch sensitive in order to maintain the waterproof status of the housing.

Single short push will toggle the Bluetooth radio on and off.

A push of more than 3 seconds will result in the logger establishing a connection to the server and uploading its

datalog.

BLUETOOTH RESET button - This button is used to reset the Bluetooth interface in the event of a lost password or generally

configuration loss.

The Bluetooth interface of this logger can be configured to have a access password which will limit external access to only

those issued the password. Should this password get lost, the logger can be opened and the Bluetooth interface reset to

disable the security. It is advisable to then connect to the logger again and setup a new password. This is explained later in

this document.

USER MANUAL : CDS549 STRATUS PULSE LOGGER

DOCUMENT NAME

CLASSIFICATION

DATE

PAGE

CDS549 STRATUS PULSE LOGGER USER

MANUAL

CONFIDENTIAL

21-JAN-21

8 OF 26

In order to reset the Bluetooth interface, with the housing open, please follow the below procedure.

Remove all power from the logger - remember to remove the batteries if external power is present.

Press and hold the Bluetooth reset button.

Power up the logger again while holding the button. Bluetooth LED will be on confirming the button has been

pressed.

Once the Red Status LED comes on again, the button can be released.

This will now reset the Bluetooth interface.

1.7 Connections

Connections are available on a series of 10 terminal connectors.

These connections are as follows:

1. External Power Supply / Solar system ground (optional)

2. External 12V Power Supply / Solar system (optional)

3. 24V 30mA max power generator output (used for powering a current loop device)

4. Ground for the 24V generator

5. Isolated negative connection for 4-20mA isolated loop input

6. Isolated positive connection for 4-20mA isolated loop input

7. ECO Transmit line

8. ECO Receiveline

9. ECO ground connection

10. System earth - used for transient voltage suppression

USER MANUAL : CDS549 STRATUS PULSE LOGGER

DOCUMENT NAME

CLASSIFICATION

DATE

PAGE

CDS549 STRATUS PULSE LOGGER USER

MANUAL

CONFIDENTIAL

21-JAN-21

9 OF 26

1.8 External Power Supply / Solar System Connection

The CDS549 Stratus Pulse logger can be powered entirely from an external 12V (8-15V) 2A power supply or solar power

source. Using a solar power source and also populating the logger with alkaline batteries means that the logger can be put

into dual mode. In this mode, while there is solar power available, the logger will remain online with the server. Should the

solar power fail, the logger will automatically switch to 'battery' mode until the solar power source is restored. This is ideal

for remote applications where there is no mains power available and streaming data is required.

1.9 Using the pulse inputs

Onboard the Stratus Pulse logger are 2 pulse inputs. Pulse inputs are used by metering type devices (eg water or energy

meter) to measure consumption.

Example configuration of water meter with a volt free switch (e.g. reedswitch)

USER MANUAL : CDS549 STRATUS PULSE LOGGER

DOCUMENT NAME

CLASSIFICATION

DATE

PAGE

CDS549 STRATUS PULSE LOGGER USER

MANUAL

CONFIDENTIAL

21-JAN-21

10 OF 26

Example configuration of water meter with electronic interface. Please note the polarity of the interface. Ground

connection to pin 4 (or 6 for Input 2).

1.10 Using the ECO interface

The onboard ECO interface is primarily used to support the GWF range of water meters with these interfaces

installed. The interface provides power to the meter, as well as reading back the data string from the meter.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario

cloudworks CDS549 Manual de usuario

Manuales populares de Controladores de otras marcas