PCS User Manual
Page 7
Instructions Pertaining to a Risk of Fire or Electric Shock
When using the PCS, basic electrical safety precautions should be
followed:
• Use this charge station to charge electric vehicles equipped
with an SAE-J1772TM charge port only. Consult the vehicle
owner’s manual to determine if the vehicle is equipped with
the correct charge port.
• Make certain the charge station SAE-J1772TM charge cable
is positioned so it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
• Do not operate your charge station if it or the SAE-
J1772TM
charge cable is physically open, cracked, frayed,
or otherwise visibly damaged. Contact your Service
Representative for service immediately.
• This product contains no user serviceable parts. Consult
the Customer Support section in this manual for service
information. Do not attempt to repair or service the charge
station yourself.
• Not for use in commercial garages where a COMMERCIAL
GARAGE is dened as a facility (or portion thereof) used
for the repair of internal combustion vehicles in which
the area may be classied due to ammable vapors being
present (such as from gasoline.)
• Do not place ngers inside of the coupler end of the SAE-
J1772TM charge cable.
• Do not allow children to operate this device. Adult
supervision is mandatory when children are in proximity to a
charge station that is in use.
• Do not use this device with an extension cord.
• Ensure that the PCS is mounted to the wall or placed on a
support so it does not hang from the outlet. Outlets are not
designed to support the weight of the PCS.
