Clinton Electronics CE-D970 Manual de usuario

CE-955-CAM-WD

Super DNR High Resolution

Color Dome Camera

CE-D970

Super DNR High Resolution Color Dome Camera

INFORMATION - This equipment has been tested and found to comply with

limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

◆

Do NOT use power sources other than those specified.

◆

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.

The lightning flash with an arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of uninsulated

dangerous voltage within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING - Changes or modifications not expressly approved by the

manufacturer could void the user's authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

How to Use the Camera 15

Troubleshooting 34

■Function Menu Structure 15

■How to Set up the Functions 16

ㆍLENS 17

ㆍEXPOSURE 19

ㆍWHITE BALANCE control 21

ㆍBACKLIGHT 22

ㆍDNR (Digital Noise Reduction) 24

ㆍDAY/NIGHT 25

ㆍIMAGE ADJ 27

ㆍSPECIAL 29

ㆍEXIT 33

Specifications 36

■Contents

Super DNR High Resolution Color Dome Camera Super DNR High Resolution Color Dome Camera

Features

Warnings and Precautions

Names and Functions of Parts

Installation

Cable Connections

Dimensions

■Lens 10

■OSD 10

■VBS-EXTRA 11

■SMPS 11

■REMOTE CONTROLLER 11

Components 8

■Features Warning ■

Super DNR High Resolution Color Dome Camera Super DNR High Resolution Color Dome Camera

3 Axis built-in 100mm Dome Housing

with Adaptor Plate Bracket

Day & Night

The camera identifies whether it is day or night

and automatically switches to the appropriate

mode, depending on its environment. By day,

the camera switches to color mode in order to

maintain optimal color. At night, it switches to

B/W mode so as to obtain better picture definition.

Ultra High Resolution

By adopting a 1/3" 410,000 pixel Sony CCD,

the camera produces clear picture quality with

a horizontal resolution of 580 TV lines for color,

and 700 TV lines for B/W.

Excellent Sensitivity

Adopting a Diagonal 6mm (1/3"), highly sensitive

CCD and digital signal processing technology,

it can clearly distinguish the outline and color

of a subject in an extremely low luminance

environment . even, for example, under starlight.

Since surveillance is possible in places where

the light is poor, the camera is appropriate for

day and night surveillance outdoors or on the

outside of buildings.

DNR (Digital Noise Reduction)

The amount of low illuminance noise has been

significantly reduced, and the signal-to-noise

ratio (S/N ratio) as well as horizontal resolution

have been improved, resulting in a clear and

sharp image display even in the dark.

Motion Detection

The camera detects motion and generates a

screen message without an external sensor.

DIS (Digital Image Stabilizer)

The DIS function compensates for any camera

movement, to produce more stable pictures.

Miscellaneous Functions

SYNC (INT/LL), SENS-UP, FREEZE, FLIP

(H/V-REV), D-ZOOM, SHARPNESS, MOTION

DETECTION and PRIVACY functions are provided.

Built-in Coax and UTP video connections

OSD

The camera control is convenient by using

7 different foreign language O.S.D.

- NTSC : Korean, English, Spanish, Japanese

- PAL : English, French, German, Spanish,

Italian, Chinese

The camera requires periodic inspection.

Contact an authorised technician to carry out the inspection.

Stop using your camera when you find it malfunctioning.

If the camera emits smoke or is unusually hot for a long period,

a fire may be caused.

Do not Install the camera on a surface that can not support it.

If the camera is installed on an inappropriate surface, it may fall

and cause injury.

Do not hold plug with wet hands.

It could cause an electric shock.

Do not dis-assemble the camera.

It may result in an electric shock or other hazards.

Do not use the camera close to a gas or oil leak.

It may result in a fire or other hazards.

■Precautions

Do not install the camera in

extreme temperature conditions.

Do not install the camera under

unstable lighting conditions.

Do not touch the front lens of the

camera.

Only use the camera under conditions

where temperatures are between

-10˚C and +50˚C. Be especially

careful to provide ventilation when

operating under high temperatures.

It can cause the image quality to be

poor.

Severe lighting change or flicker can

cause the camera to work improperly.

This is one of the most important parts of

the camera. Be careful not to leave

fingerprints on the lens cover.

Do not install or use the camera in an

environment where the humidity is high.

ㆍIf the camera is exposed to spotlight or object reflecting strong light,

smear or blooming may occur.

ㆍPlease check that the power satisfies the normal specification before

connecting the camera.

It can cause malfunctions to occur.

If it gets wet, wipe it dry immediately.

Liquids can contain minerals that

corrode the electronic components.

If exposed to radioactivity the CCD

will fail.

It can damage the CCD.

Do not drop the camera or protect

it from physical shocks.

Do not expose the camera to rain

or spill beverage on it.

Do not expose the camera to

radioactivity.

Never keep the camera pointed

directly at strong light.

Super DNR High Resolution Color Dome Camera Super DNR High Resolution Color Dome Camera

■Components Names and Functions of Parts ■

1. COLOR DOME CAMERA

2. SCREWS

3. WIRE FOR VBS-EXTRA

4. INSTRUCTION GUIDE

Super DNR High Resolution Color Dome Camera Super DNR High Resolution Color Dome Camera

■Names and Functions of Parts Names and Functions of Parts ■

②OSD PCB

①LENS : Vari-Focal DC Auto Iris Lens

Super DNR High Resolution Color Dome Camera Super DNR High Resolution Color Dome Camera

DOWN

RIGHTLEFT

BA101

DIN1

CN4

●Jog Shuttle Switch

Push button : Used for the menu display. This button can be used to

confirm settings after changing the value of the selected

function or current conditions.

& : Used when changing item values, by moving the cursor to

the left or right on the menu screen.

& : Used for selecting items by moving the cursor up or down

on the menu screen

③VBS-EXTRA FOR CONNECTING TO LCD

Please use the supplied wire when connecting to LCD

VBS-EXTRA

④3 AXIS BRACKET

Please loosen screws and fix tilted and panned position.

⑤SMPS PCB FOR DUAL POWER - IF APPLICABLE

⑥REMOTE CONTROLLER

●SET : Used to access menu mode and for configuration.

: Moves cursor up the menu screen.

: Moves cursor down the menu screen.

: Moves cursor left in the menu screen.

Parameter change

: Moves cursor right in the menu screen.

Parameter change

( Optional Item )

SET

1. Dome Base Mounting

- Open the dome by unscrewing the ring from the base-remove it

by unscrewing the ring and dome anti-clockwise.

- Mount the camera base to a sturdy surface using the supplied screws

and the premade holes on the base of the dome.

2. Power Connect & Monitor Impedance

- DC12V/300mA regulated power supply (DC12V only)

AC24V Class 2 power supply (AC24V/DC12V)

- To avoid fire or shock hazard, must use a UL listed power supply.

- Set the monitor impedance switch to 75Ω. Check the impedance

switch when the screen turns blurred.

3. Camera Module Adjustment

- Loosen screws for 3-axis camera bracket and adjust the direction

and angle of camera.

- Make sure to retighten the screws for camera bracket.

- Set any function you wish to activate by using the OSD buttons.

4. Dome Cover Mounting

- Replace the ring and dome by locating it on the base and turning

it clockwise.

5. When using UTP Cable

- Connect UTP(Unshield Twisted Pair) wire to the UTP output of the

camera directly. UTP transmitter is included in the camera therefore

additional UTP transmitter is not necessary.

- UTP receiver is necessary to connect UTP wire to Monitor or DVR.

When connecting UTP wire, make sure the polarity of the video signal is correct.

- Use UTP wire "CAT 24AWG" to have the best transmission quality.

■Names and Functions of Parts

Super DNR High Resolution Color Dome Camera Super DNR High Resolution Color Dome Camera

■Cable Connections

DC only

AC24V

DC12V AC IN

DC IN AC IN

DC IN

VIDEO(COAX)

POWER

VIDEO(UTP)

■Dimensions

(unit : mm)

100φ

73.0φ

125.79φ

105.5

55.0

DOME COVER

DECORATION RING

GIMBAL A'SSY

BASE HOUSING

■How to Use the Camera

Super DNR High Resolution Color Dome Camera Super DNR High Resolution Color Dome Camera

On-Screen Display Menu Structure

Setup Menu

LENS

EXPOSURE

WHITE BALANCE

BACKLIGHT

DNR

DAY/NIGHT

IMAGE ADJUSTMENT

(IMAGE ADJ.)

SPECIAL

EXIT

• DC • MANUAL

• SHUTTER • AGC • SENS-UP

• RETURN

• ATW • MANUAL • AWC SET

• OUTDOOR • INDOOR

• OFF • BLC • HLC

• ON • OFF

• COLOR • B/W • AUTO

• EXTERN

• FREEZ • V-REV • H-REV

• D-ZOOM • SHARPNESS

• RETURN

• CAMTITLE • SYNC • MOTION DET

• PRIVACY • DIS • COMM ADJ

• LANGUAGE • RESET • RETURN

■Installation

* When installing on an adapter plate bracket.

① Place the adapter plate bracket on a flat installation surface and fix it with

the screws provided.

② When placing the camera body onto the plate, insert the plate pin into the

corresponding holes on the camera body as shown in figure-1. Lock the

camera in place by turning the camera body clockwise.

③

When placing the camera body on the plate, make sure that the power and

video cables are passed through.

④

After installation and adjustment of the camera is complete, secure the dome

cover by turning it clockwise.

Unlocking

direction

Locking

direction

Dome Cover

Unlocking

direction

Locking

direction

Camera Body

3.5x25 tapping

screw (provided)

Adapter Plate

How to Use the Camera ■

■How to Use the Camera

Super DNR High Resolution Color Dome Camera Super DNR High Resolution Color Dome Camera

1. LENS DC

2. EXPOSURE

3. WHITE BAL ATW

MAIN SETUP

3. Set up a selected item by using the Left and Right buttons.

To finish and save the settings, select 'EXIT' and press the SET button.

This function is used to adjust the brightness of the screen.

When the SETUP menu screen is displayed on the screen, position the

cursor to point to LENS using the Up and Down buttons.

2. Select the type of lens using the Left and Right buttons.

1. LENS DC

2. EXPOSURE

3. WHITE BAL ATW

4. BACKLIGHT OFF

5. DNR ON

6. DAY/NIGHT AUTO

7. IMAGE ADJ

8. SPECIAL

9. EXIT

MAIN SETUP

Select the desired menu

item by using the UP and

DOWN buttons.

Modes can be changed

using the LEFT and

RIGHT buttons.

LENS

Note

•An item with the icon also has sub-menus. To select a sub-menu,

press the SET button.

•An item with the - - - icon has no sub-menus available for selection.

Settings can be made using the 5 buttons on the rear of the camera.

How to Set up the Functions

1. Press the SET button.

• The Setup menu is displayed on the monitor screen.

2. Select a menu item using the Up and Down buttons.

• Place the cursor over a desired item.

1. LENS DC

2. EXPOSURE

3. WHITE BAL ATW

4. BACKLIGHT OFF

5. DNR ON

6. DAY/NIGHT AUTO

7. IMAGE ADJ

8. SPECIAL

9. EXIT

MAIN SETUP

DOWN

RIGHTLEFT

BA101

DIN1

CN4

■How to Use the Camera

Super DNR High Resolution Color Dome Camera Super DNR High Resolution Color Dome Camera

1. LENS DC

2. EXPOSURE

3. WHITE BAL ATW

4. BACKLIGHT OFF

5. DNR ON

6. DAY/NIGHT AUTO

7. IMAGE ADJ

8. SPECIAL

9. EXIT

MAIN SETUP

When the SETUP menu screen is displayed select EXPOSURE using

the Up and Down buttons.

2. Select the desired mode using the Left and Right buttons.

●SHUTTER : Select either auto or manual shutter.

- A.FLK :

Select this when picture flicker is expereinced, which can happen

when there is a clash with the frequency of the installed lighting.

- ESC :

Select this to control the shutter speed automatically. If ESC is

selected, the shutter speed is automatically controlled according

to the ambient illumination available.

- MANUAL : The shutter speed is controlled manually.

EXPOSURE

●

MANUAL : Manual Lens selection

●

DC : Auto Iris Lens selection

3. Press the SET button if you wish to return to the previous menu

Note

•

The brightness of the screen can be adjusted in DC mode.

The brightness can be adjusted within the range of 1 ~ 70.

The optimum level of brightness for the user can be achieved by

adjustment.

•

If you select the MANUAL mode, it can be adjusted in ESC mode.

Tabla de contenidos

Otros manuales de Cámara de seguridad de Clinton Electronics

Clinton Electronics

Clinton Electronics CE-VFCD918-WD Manual de usuario

Clinton Electronics

Clinton Electronics CE-505-Z-IR Manual de usuario

Clinton Electronics

Clinton Electronics CE-PTZ series Manual de usuario

Clinton Electronics

Clinton Electronics D953 Manual de usuario

Clinton Electronics

Clinton Electronics VX20 Manual de usuario

Clinton Electronics

Clinton Electronics CE-D958 Manual de usuario

Clinton Electronics

Clinton Electronics Home Guard Manual de usuario

Clinton Electronics

Clinton Electronics CE-955-CAM-WD Manual de usuario

Clinton Electronics

Clinton Electronics Effio-V WDR Manual de usuario

Clinton Electronics

Clinton Electronics VandalX VX70B Manual de usuario

Clinton Electronics

Clinton Electronics CE-CC115-W Manual de usuario

Clinton Electronics

Clinton Electronics CE-T100HD Manual de usuario

Clinton Electronics

Clinton Electronics NX3 Series Manual de usuario

Clinton Electronics

Clinton Electronics VF1000IR Manual de usuario

Clinton Electronics

Clinton Electronics CE-PTZ10XHD Manual de usuario

Clinton Electronics

Clinton Electronics VF54IR Manual de usuario

Clinton Electronics

Clinton Electronics CE-PTZ10X Manual de usuario

Clinton Electronics

Clinton Electronics CE-955-CAM-WD Manual de usuario

Clinton Electronics

Clinton Electronics VF540 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario