CLIMASTAR SMART TOUCH 500 Guía



INSTALLATION MANUAL AND USER GUIDE



SMART TOUCH RANGES

2



3



INDEX

1- WARNING........................................................................................................4

2- INSTALLATION INSTRUCTIONS.................................................................7

3- USING THE INERTIA RADIATOR, SMART TOUCH RANGES................8

3.1 STARTING THE DEVICE...........................................................................8

3.2 SETTING DATE AND TIME ......................................................................8

3.3 MANUAL MODE.........................................................................................8

3.4 AUTOMATIC MODE ..................................................................................9

3.5 PILOT WIRING MODE.............................................................................10

3.6 COPY FUNCTION.....................................................................................10

3.7 KEY BLOCK FUCTION............................................................................11

3.8 SOUND FUNCTION..................................................................................11

3.9 OTHER INFORMATION...........................................................................11

5- CLEANING AND MAINTENANCE.............................................................12

6- TECHNICAL SPECIFICATIONS..................................................................13

7- TROUBLESHOUTING...................................................................................14

8- GUARANTEE TERMS...................................................................................15

4



1- WARNING

The warranty of the heater will not cover any damage

caused by non observance of any of these instructions.

This guide must be kept and given to any new owner.

This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge

if they have been given supervision or instruction

concerning use of the appliance in a safe way and

understand the hazards involved. Children must not play

with the appliance. Cleaning and user maintenance must

not be made by children without supervision.

Children aged from 3 years and less than 8 years shall

only switch on/off the appliance provided that it has been

placed or installed in its intended normal operating

position and they have been given supervision or

instruction concerning use of the appliance in a safe way

and understand the hazards involved. Children aged from

3 years and less than 8 years shall not plug in, regulate

and clean the appliance or perform user maintenance.

Children of less than 3 years should be kept away unless

continuously supervised.

CAUTION: Some parts of this product can become

very hot and cause burns. Particular attention has to

5



be given where children and vulnerable people are

present.

Should the heater be moved and reinstalled, it is essential

that the work is carried out by a competent electrician.

The use of these heaters is forbidden in any area where

there is a presence of gases, explosives or inflammable

objects.

Neither the connecting cable nor any other object must come

into contact with the hot unit.

Check that the voltage shown on the rating plate on the

heater is the same as the voltage of the supply to which

connection is to be made.

WARNING: In order to avoid overheating, do not cover

the heater. Do not use this heater to dry clothes.

The air outlet at the top of the thermal radiator and the air

inlet at the bottom are provided to ensure the most efficient

operation of the appliance. They also protect the heater from

overheating; therefore, it is essential that at no time are

they covered.

This heater should be switched off at the isolating switch

before any repair work is carried out. This action should

also be taken during the times of the year when heat is not

required.

The radiator should not be installed just below an electrical

socket or in front of a socket outlet.

6



The appliance must be installed in such a way that switches

and other control devices cannot be touched by a person

using a bath or shower.

The installation must be carried out in accordance with the

current electrical regulations.

The heater is fitted with a flexible cable size 3 x 1.00 mm2

for electrical connection. It may be used to connect the

heater to the fixed wiring of the premised through a suitable

connection box positioned adjacent to the heater.

The supply circuit to the heater must incorporate a double

pole isolating switch having a contact separation of at least

3 mm.

If the flexible supply cord is damaged, it must be replaced

by a repair workshop recognised by the manufacturer, in

order to avoid hazard.

All models are supplied with an electrical interrupt cut-out.

This will switch off the heater if, for any reason, it

overheats. Should the cut-out operate, turn the heater off

and remove the cause for the overheating. The cut-out will

be reset automatically.

The presence in the air of particles of smoke, dust and other

pollutants could, in time, discolour the walls and surfaces

around the heater.

7



2- INSTALLATION INSTRUCTIONS

- Open the package and check that it is the

correct model and it is in good condition.

- To obtain optimum performances it is

necessary to maintain a minimum clearance

of 15 cm between the radiator and any

inflammable material as furniture, curtains

etc.

- Recommended clearances required to

maintain are indicated on the following

figure:

- Once decided the location to install the device, remove the packaging and

extract the device and its mounting kit

- Fix the radiator to the wall using the box as a pattern as indicated below:

Check measures and levelling before drilling. Measurements in mm

150

100

500

8



3- USING THE INERTIA RADIATOR, SMART TOUCH

RANGES

3.1 STARTING THE DEVICE

First, plug in the power cord to a mains power outlet, and click the switch on the right. The

display starts, shows a welcome message, and shows OFF. To start the device, press the

“POWER” button; set temperature appears on the screen.

3.2 SETTING DATE AND TIME



A. Press OK for a few seconds.

B. The display shows CONFIG TIME. If not, press  until you see and press OK.

C. Set the hour (H) using; to validate press OK.

D. Set the minutes (M) using; to validate press OK.

E. Press  to select the day of the week (DAY 1 Monday, DAY 2 Tuesday); to validate press

OK.

Date and time are now set. Press ESC and select the comfort temperature pressing the

arrows. Your device is now working!

3.3 MANUAL MODE



In this mode, the device works as per factory set. All you have to do is press  to select

the desired temperature.

The set temperature can be modified from 15º C to 28º C in intervals of 0.5.

1. “POWER /ESC” button: Turn on

and off the device / allows moving back

from any menu.

2. MODE/OK” button: to access main

menu and select or confirm the desired

option.

3. “UP/DOWN” arrows: allow to set

the values and navigate through the

different options of the menus.

4. DISPLAY: shows the different

options and desired values.

5. RED DOT: if flashing, the device is

working in PILOT WIRING mode, if

not, then it is working in automatic as

per the set programming.



9



How to select the manual mode?

-Press OK

-Press  and select MAN; press OK to confirm.

-Press  and confirm the desired temperature.

Press POWER BUTTON to switch off the unit, the display shows OFF.

If the device is OFF, the FROST setting automatically activates to prevent temperature being

below 7ºC.

3.4 AUTOMATIC MODE



In this mode the device works time schedule. It can work as per factory set (see table below)

or according to the user’s configuration.

TIME MONDAY TUESDAY WEDNESDAY

THURSDAY

FRIDAY SATURDAY SUNDAY

00 H ECO ECO ECO ECO ECO ECO ECO

01 H ECO ECO ECO ECO ECO ECO ECO

02 H ECO ECO ECO ECO ECO ECO ECO

03 H ECO ECO ECO ECO ECO ECO ECO

04 H ECO ECO ECO ECO ECO ECO ECO

05 H ECO ECO ECO ECO ECO ECO ECO

06 H ON ON ON ON ON ECO ECO

07 H ON ON ON ON ON ON ON

08 H ECO ECO ECO ECO ECO ON ON

09 H ECO ECO ECO ECO ECO ON ON

10 H ECO ECO ECO ECO ECO ON ON

11 H ON ON ON ON ON ON ON

12 H ON ON ON ON ON ON ON

13 H ECO ECO ECO ECO ECO ON ON

14 H ECO ECO ECO ECO ECO ON ON

15 H ECO ECO ECO ECO ECO ON ON

16 H ECO ECO ECO ECO ECO ON ON

17 H ON ON ON ON ON ON ON

18 H ON ON ON ON ON ON ON

19 H ON ON ON ON ON ON ON

20 H ON ON ON ON ON ON ON

21 H ON ON ON ON ON ON ON

22 H ECO ECO ECO ECO ECO ECO ECO

23 H ECO ECO ECO ECO ECO ECO ECO

Before setting the device, take into account the following:

-OFF, the device is programmed to switch off.

-ECO, economy temperature, 3ºC below set temperature.

-ON, comfort temperature. Temperature selected by the user as room temperature. It can

be modified in the manual or automatic mode when shown on the display.

10



How to select custom programming?

-Press OK

-Press key , select AUTO; press OK to validate.

-The display will show the set temperature together with a red dot that indicates the

unit is working in automatic mode.

If AUTOMATIC mode is selected the heater cannot be turned off. To turn off the device,

enter mode (MODE/OK), select MAN using  and press OK. Now you can turn off the

device using

How to carry out a custom programming?

If you need to programme several days on identical conditions, programme one day

and copy the remaining ones. See Function COPY DAY (section 2.7)

A.- Press OK for a few seconds.

B.- Press , select SELECT DAY and press OK to validate.

C.- Press , select the day to set and press OK to validate.

D.- We start at 00.00 h., use  to select the desired temperature (ON -set temperature-;

ECO -3ºC below set temperature-; OFF switch off). Press Ok to validate.

E.- Go on programming the remaining hours until 23.00 h; at this stage the display shows

the day to programme.

If we want to set the remaining days, turn to B; if not press

3.5 PILOT WIRING MODE



In this mode the device works following instructions of an external unit.

How to select FP mode?

A.- Press OK

B.- Press key , select FP; press OK to validate.

C.- The display will show the set temperature together with a red dot that indicates the

unit is working in FP mode.

If FP mode is selected the heater cannot be turned off. To turn off the device, enter mode

(MODE), select MAN using  and press OK. Now you can turn off the device using

3.6 COPY FUNCTION



This function enables you to copy existing time programmes. To copy the setting of one

day into another, do as follows:

A.- Press OK for a few seconds.

B.- Press , select COPY DAY and press OK to validate.

C.- Press , select the day to set and press OK to validate.

D.- Press , select the day to copy; press OK to validate.

If we want to go on copying into other days, turn to B. If not, press

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Calentador de CLIMASTAR

CLIMASTAR

CLIMASTAR CURVE WIFI Manual de usuario

CLIMASTAR

CLIMASTAR 3IN1 PRO Series Manual de usuario

CLIMASTAR

CLIMASTAR SILICIUM SMART PRO Manual de usuario

CLIMASTAR

CLIMASTAR SILICIUM SLIM Series Manual de usuario

CLIMASTAR

CLIMASTAR SILICIUM HYBRID ECO Manual de usuario

CLIMASTAR

CLIMASTAR OPTIMUS Manual de usuario

CLIMASTAR

CLIMASTAR SILICIUM HYBRID INVERTER Manual de usuario

CLIMASTAR

CLIMASTAR SILICIUM SLIM WIRELESS Manual de usuario

CLIMASTAR

CLIMASTAR SILICIUM HYBRID INVERTER Manual de usuario

CLIMASTAR

CLIMASTAR SILICIUM 3 IN 1 Manual de usuario

CLIMASTAR

CLIMASTAR Smart EASY TECH Manual de usuario

CLIMASTAR

CLIMASTAR DK ONE - WIFI Manual de usuario

CLIMASTAR

CLIMASTAR SILICIUM ETNA Manual de usuario

CLIMASTAR

CLIMASTAR STEEL 800 W Manual de usuario

CLIMASTAR

CLIMASTAR SILICIUM TOUCH Manual de usuario

CLIMASTAR

CLIMASTAR SILICIUM WIFI Manual de usuario

CLIMASTAR

CLIMASTAR ETNA Manual de usuario

CLIMASTAR

CLIMASTAR SILICIUM ONE Manual de usuario

CLIMASTAR

CLIMASTAR STYLE 500W Manual de usuario

Manuales populares de Calentador de otras marcas

oventrop

oventrop Regucor Series Manual de usuario

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manual de usuario

ELMEKO

ELMEKO ML 150 Manual de usuario

BN Thermic

BN Thermic 830T Manual de usuario

KING

KING K Series Guía

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guía de inicio rápido

Well Straler

Well Straler RC-16B Manual de usuario

EUROM

EUROM 333299 Manual de usuario

Heylo

Heylo K 170 Manual de usuario

Eterna

Eterna TR70W Manual de usuario

Clarke

Clarke GRH15 Manual de instrucciones

IRSAP

IRSAP The Radiator Company Ovali Manual de usuario

Empire Heating Systems

Empire Heating Systems WCC65 Manual de usuario

Wetekom

Wetekom 92 86 43 Manual de usuario

Desa

Desa SPC170-F Manual de usuario

Watlow

Watlow Watrod Electric Tubular Heaters Manual de usuario

Haverland

Haverland ECO-DRY GPS Series Manual de lista de piezas

Stelpro

Stelpro ASILVC2060 Series Manual de usuario